AIX上DB2安装步骤.docx

AIX上DB2安装步骤.docx

《AIX上DB2安装步骤.docx》由会员分享，可在线阅读，更多相关《AIX上DB2安装步骤.docx（14页珍藏版）》请在冰豆网上搜索。

AIX上DB2安装步骤

       文件系统/usr和/homeDB21.1安装DB2服务器1.1.1检查系统环境V7.1产品总是被安装在/usr/lpp/db2_07_01目录下（/usr文件系统），而每个DB2实例和sample数据库都在管理用户的根目录下（/home文件系统）创建，所以，必须保证这两个文件系统上有足够的空闲存储空间。

建议/usr文件系统至少有500M剩余空间；/home文件系统至少有100M剩余空间。

使用命令dfChange/Show       扩充文件系统/usr和/home#smittychfs  查看文件系统/usr和/home的信息。

CharacteristicsofaJournaledFileSystem选择要扩大的文件系统，如/home，回车后进入以下画面：

在“SIZEoffilesystem（in512-byteblocks）”处输入希望扩大到的空间容量，其它不变，回车即可。

如/home文件系统需要扩大到200M，则通过计算得出：

200＊1024＊1024/512=409600在“SIZEoffilesystem（in512-byte       页空间（pagingspace）应为内存的1.5~2倍。

blocks）”处，输入“409600”即可。

1.1.2安装CD-ROM文件系统将DB2UDBV6.1FORAIX光盘放入光驱，如果CD-ROM文件系统已经存在，使用命令mount/dev/cd0安装CD-ROM文件系统；否则，应首先创建CDROM文件系统：

（1）       创建一个目录来安装该CD-ROM#mkdir-p/cdrom      cdrom表示CD-ROM安装目录

（2）       分配CD-ROM文件系统#smittycrcdrfs在“DEVICEname”处按F4选择“cd0”；“MOUNTPOINT”处输入“/cdrom”；选择“MountAUTOMATICALLYatsystemrestart?

”为“no”。

创建成功后，执行#mount/dev/cd0安装CD-ROM文件系统。

1.1.3安装DB2软件的LicenseKeyDB2软件的LicenseKey保存在光盘上db2/license/db2entr.lic文件中，一般为最后两行，将这两行追加到/usr/lib/netls/conf/nodelock文件中即可。

使用命令：

tail–4/cdrom/db2/license/db2entr.lic>;>;/usr/lib/netls/conf/nodelock

       #cd/cdrom#./db2setup     进入DB2安装画面：

1.1.4安装DB2产品+-------------------------------InstallDB2V7--------------------------------+|                                                                             ||  Selecttheproductsyouarelicensedtoinstall.YourProofof            ||  EntitlementandLicenseInformationbookletidentifytheproductsfor     ||  whichyouarelicensed.                                                   ||                                                                             ||  Toseethepreselectedcomponentsorcustomizetheselection,select      ||  Customizefortheproduct.                                                ||  []DB2AdministrationClient                          [Customize...]  ||  [*]DB2UDBEnterpriseEdition                         [Customize...]  ||  []DB2UDBConnect                                    [Customize...]  ||  [*]DB2ApplicationDevelopmentClient                 [Customize...]  ||  Tochoosealanguageforthefollowingcomponents,selectCustomizefor   ||  theproduct.                                                              ||      DB2ProductMessages                               [Customize...]  ||      DB2ProductLibrary                                [Customize...]  ||                                                                             ||  [  OK  ]                    [Cancel]                    [ Help ]  |+------------------------------------------------------------------------------+                          （图一）注：

只需安装“DB2UDBEnterpriseEdition（DB2通用数据库企业版）”。

和“DB2ApplicationDevelopmentClient”两项其他两项不需安装：

DB2AdministrationClient（DB2客户端管理）DB2SoftwareDeveloper'sKit（DB2软件开发工具包）

       移到光标到”DB2UDBEnterpriseEdition”,按空格健选择，选中后前面应有一“＊”号；移动光标到”Customize”,回车后进入以下画面：

+------------------DB2UniversalDatabaseEnterpriseEdition-----------------+|                                                                             ||  Required:

    DB2Client                                                  ||                DB2Run-timeEnvironment                                    ||                DB2Engine                                                  ||                DB2CommunicationSupport:

                                 ||                    TCP/IP        IPX/SPX                                  ||                    SNA           DRDAAS                                  ||                DB2SampleDatabaseSource                                  ||                AdministrationServer                                       ||                DB2ConnectSupport                                         ||                LicenseSupport                                             ||  Optional:

    [*]JavaSupport                                            ||                [*]Replication                                             ||                []ControlCenter                                          ||                []DB2ControlServer                                      ||                CodePageConversionSupport:

                               ||                    []Japanese    [*]SimplifiedChinese                 ||                    []Korean      []TraditionalChinese                ||                                                                             ||  [SelectAll]             [DeselectAll]                [Default]  ||  [  OK  ]                    [Cancel]                    [ Help ]  |+------------------------------------------------------------------------------+       在CodePageConversion                          （图二）Support:

处选择SimplifiedChinese（简体中文），然后选择OK，返回“图一”，选择“OK”，进入以下画面：

+----------------------------CreateDB2Services-----------------------------+|                                                                             ||  Selecttheitemsyouwanttocreate,andselectOKwhenfinished.         ||                                                                             ||  ADB2Instanceisanenvironmentwhereyoustoredataandrun             ||  applications.Aninstancecancontainmultipledatabases.                 ||                                                                             ||  []CreateaDB2Instance.                             :

Customize...:

  ||  [*]DonotcreateaDB2Instance.                                         ||                                                                             ||  AnAdministrationServerprovidesservicestosupportclienttoolsthat   ||  automatetheconfigurationofconnectionstoDB2databases.               ||                                                                             ||  []CreatetheAdministrationServer.                  :

Customize...:

  ||  [*]DonotcreatetheAdministrationServer.                              ||                                                                             ||  [  OK  ]                    [Cancel]                    [ Help ]  |+------------------------------------------------------------------------------+                  选择“DonotcreateaDB2Instance”和“Do                   （图三）notcreatetheAdministrationServer”，即不创建实例和管理服务器。

选择“OK”进入以下画面：

+--------------------------Warning----------------------------+|                                                              ||  DBI1755WTheAdministrationServerisnotcreated.         ||                                                              ||  Cause:

 YouhavenotcreatedaAdministrationServer.      ||  WithouttheAdministrationServer,youcannotprovide      ||  servicestosupportclienttoolsthatautomatethe         ||  configurationofconnectionstoDB2databases,andcannot  ||  administerDB2fromyourserversystemoraremoteclient  ||  usingtheControlCenter.                                  ||                                                              ||  Action:

                                                    ||                                                              ||  o  PressOKtocontinue,or                               ||                                                              ||  o  PressCanceltoabort.                                 ||                                                              ||  [  OK  ]                                    [Cancel]  |+---------------------------------------------------------------+       选择“OK”后，进入以下画面：

                     （图四）

+-------------------------------DB2Installer--------------------------------+|  +--------------------------SummaryReport----------------------------+  ||  |                                                        [More...] |  ||  | Installation                                                       |  ||  | ------------                                                       |  ||  | Productcomponentstobeinstalled:

                                |  ||  |                                                                     |  ||  |   DB2Client                                                       |  ||  |   OpenDatabaseConnectivity（ODBC）                                |  ||  |   DB2Run-timeEnvironment                                         |  ||  |   DB2Engine                                                       |  ||  |   DB2CommunicationSupport-TCP/IP                               |  ||  |   AdministrationServer                                            |  ||  |   DB2ConnectSupport                                              |  ||  |   DB2CommunicationSupport-SNA                                  |  ||  |   DB2CommunicationSupport-DRDAApplicationServer              |  ||  |   DB2CommunicationSupport-IPX/SPX                              |  ||  |                                                        [More...] |  ||  +----------------------------------------------------------------------+  ||                                [Continue]                                |+------------------------------------------------------------------------------+       选择“Continue”后，进入以下画面：

+---Warning                            （图五）-------------------------------------+|                                                ||  （X）Thisisyourlastchancetostop.        ||                                                ||      SelectOKtostart,orCanceltoabort.  ||