电气外文文献翻译.docx
《电气外文文献翻译.docx》由会员分享,可在线阅读,更多相关《电气外文文献翻译.docx(10页珍藏版)》请在冰豆网上搜索。
![电气外文文献翻译.docx](https://file1.bdocx.com/fileroot1/2022-10/12/497b190b-aba6-498b-bfd1-b939275c8f5e/497b190b-aba6-498b-bfd1-b939275c8f5e1.gif)
电气外文文献翻译
Circuit breaker
断路器
Compressed air circuit breaker is a mechanical switch equipment, can be i
空气压缩断路器是一种机械开关设备,能够在
n normal and special conditions breaking current (such as short circuit cur
正常和特殊情况下开断电流(比如说短路电流)。
rent). For example, air circuit breaker, oil circuit breaker, interference circ
例如空气断路器、油断路器,干扰电路的导体
uit conductor for the application of the safety and reliability of the circuit
干扰电路的导体因该安全可靠的应用于其中,
breaker, current in arc from is usually divided into the following grades:
a
电流断路器按灭弧远离通常被分为如下等级:
ir switch circuit breaker, oil circuit breaker, less oil circuit breaker, compr
空气开关断路器、油断路器、少油断路器、压缩空
essed air circuit breaker, a degaussing of isolating switch, six sulfur hexaf
气断路器、具有消磁性质的隔离开关、六氟
luoride circuit breaker and vacuum breaker. Their parameters of voltage,
化硫断路器和真空断路器。
他们的参数有电压等级、
current, insulation level of breaking capacity, instantaneous voltage off ti
开断容量的电流、绝缘等级开断时间的瞬时电压恢复和
me of recovery and a bombing. Breaker plate usually include:
1 the maxi
轰炸时间。
断路器的铭牌通常包括:
1.最大可承
mum tolerable current; 2 of the maximum current is interrupted; 3 largest
受电流;2.最大中断电流;3.最大线
line voltage; 4 interrupt the cycle number. In the 60hHZ system, interrupt
路电压;4.中断周期数量。
在60hHZ的系统中,中断
may last from 3- to 8 cycle, in order to quickly break up to the load curre
可能持续3-至8个周期,为了快速中断达负荷电流,
nt, we have to ensure continued to cool it, high-speed, breaking can limit
我们不得不确保它的持续冷却,高速开断能限制
on transmission line damage, it is equally important to help system to mai
对传输线路的损害,这一点是同等重要的它帮助系统
ntain stable operation at any time of the accident, the main circuit breaker
在任何事故发生时维持稳定运行,断路器主要
by operating mechanism, actuator and arc quenching chamber.
由操作机构、执行机构和灭弧室组成。
When a trigger current or voltage, spring operation mechanism of air isol
当有触发电流或者电压时,空气隔离开关的弹簧操作机构
ation switch moves quickly to reduce the contact loss, special shape and u
迅速动作以用来减少触点的烧损,主触点的特殊形
se the material of main contact completely fit for the arc of contact, air is
状和使用材料完全适合电弧的接触,空气
olation switch further improvement is due to the arc quenching performan
隔离开关更进一步的改进是由于灭弧性能
ce, insulating baffle plates arc shield, with arc the function of these specia
绝缘隔板组成的灭弧罩,带灭弧功能的触头等这些特殊性
l properties, it is used in low voltage and DC circuit breaker.
质,所以仍被应用于低电压等级和直流断路器中。
Oil circuit breaker in around 1900, mainly to meet the new, breaking capa
多油断路器出现于1900前后,主要用来满足新的开断容量的要求,
city requirements, AC switch is immersed in an oil cylinder, the oil in the
交流开关被浸入一个油缸之中,油在
arc quenching and zero set off function is very effective in the current, arc
熄灭电弧和在电流过零时建立开断功能是十分有效,
gate, nozzle, pear, a new operation mechanism and a variety of the new c
灭弧栅、喷油嘴、鸭梨锄头、新的操作机构和多种新的断路功能
ircuit function in recent decades to introduce the use of oil circuit breaker
在近几十年引进使用多油断路器能够适应362kV。
can adapt to 362kV.
Types and Construction of Transformer
变压器的类型和结构
A transformer is a device that alternating current electric energy at one vo
变压器是一个通过磁场作用将一个交流电压值变成另一个电压值的
ltage level into alternating current electric energy at another voltage level
设备。
through the action of a magnetic field.It consists of two or more coils wir
它由2条或更多的金属丝缠绕在
e wrapped around a common ferromagnetic core.These coils are (usually)
一个核心磁铁上组成的。
这些绕线(一般)不直
not directly connected. The only connection between the coils is the com
接接触。
绕线之间唯一的联系是它们共有的存在于磁芯
mon magnectic flux presen within the core.
的磁通量。
One of the transformer windings is connected to a source of ac electric po
一组变压器绕组连接到一个交流电源上,
wer,and the second(and perhaps third) transformer winding supplies elect
同时第二组(或许第三组)变压器绕组作为电源提供给负载。
ric power to loads. the transformer winding connected to the power souce
连接到电源上的变压器绕组叫做一次绕组,或者输
is called the primary winding or input winding.and the winding connecte
入绕组。
连接负载的绕组叫做二次
d to the loads is called the secondary winding or input winding.If there is
绕组或者输出绕组。
如果电压
a third winding on the transformer,it is called the tertiary winding. Powe
器上有第三绕组,它叫做三次绕组。
电力变
r transformer are constructed on one of two types of cores.one type of con
压器由一两种磁芯中的一种构成。
一种构造是由
struction consists of a simple rectangular laminated piece of steel with the
一种简单的变压器绕组缠绕在矩形两边的矩形薄钢片组成。
transformer windings wrapped around two sides of the rectangle.This typ
这种构
e of construction is know as coreform .The other type consists of three-le
造类型被认为是核心形式。
另一种类型是由绕组缠绕在中心
gged laminated core with the windings wrapped around the center leg .Th
引脚的3引脚叠片铁心构成。
is type of construction is know as shell form.In either case,the core is con
这种构造类型贝壳形式。
其中任意一种类型,磁心都
structed of thin laminations electrically isolated form each other in order i
是由排列整齐的彼此之间电气隔离的薄迭片构成,n order to reduce eddy currents to a minimum.
The primary and secondary windings in a physical transformer are wrapp
一个物理变压器的一次绕组和二次绕组被缠绕成一个在内部的另一
ed one on top of the other with the low-voltage winding innermost.Such a
个低压绕组的上面。
这样