OTS用表格汇总1080526.docx
《OTS用表格汇总1080526.docx》由会员分享,可在线阅读,更多相关《OTS用表格汇总1080526.docx(33页珍藏版)》请在冰豆网上搜索。
OTS用表格汇总1080526
OTS文件汇总表
OTSFileSummarySheet
供应商名称
SupplierName
零件号
PartNumber
供应商代码
SupplierCode
零件名称
PartName
序号
REF.NO.
报告名称
ReportName
报告编号
ReportNumber
合格
Qualified
不合格
Unqualified
备注
Remark
一
供应商资料InformationofSupplier
1
工装样件提交保证书
GuaranteeofOTSSubmission
2
尺寸检测报告
DimensionInspectionReport
3
材料检测报告
MaterialInspectionReport
4
性能检测报告
PerformanceInspectionReport
5
外观批准报告
AppearanceApprovalReport
6
试验报告原始记录复印件
Copyoforiginalrecordoftestreport
7
法规件外观标识核查报告
AuthenticationPartAppearanceIdentificationVerificationReport
8
网络诊断系统兼容性批准报告
NetworkDiagnosticSystemCompatibilityApprovalReport
二
奇瑞公司资料InformationofChery
1
尺寸认可报告
DimensionApprovalReport
2
材料认可报告
MaterialApprovalReport
3
性能认可报告
PerformanceApprovalReport
4
道路试验报告
RoadTestReport
5
法规件外观标识认可报告
AuthenticationPartAppearanceIdentificationApprovalReport
备注(Remark):
编制Compiledby:
日期Date:
审核Auditedby:
日期Date:
批准Approvedby:
日期Date:
编号:
QCX02.002-001
工装样件提交保证书
报告编号:
零件名称:
零件号:
安全和/或法规项 □是 □否 工程图样更改等级:
更改日期:
适用车型:
重量(kg):
图样号:
采购订单号:
采购工程师:
检具号:
工具更改等级:
批准日期:
供应商资料
供应商名称:
供应商代码:
地址:
邮编:
主机厂名称:
奇瑞汽车股份有限公司
提交原因
□首次提交□改为其它选用的结构或材料
□工程更改□偏差校正
□其它
注:
该部件是否含有任何限制的或需要报告的物质。
□是 □否
零部件是否标注了相应的产品标识。
□是 □否
要求的提交等级(选择一项)
□等级1——只向本公司提交保证书(若指定为外观项目,还应该提交外观件批准报告)
□等级2——向本公司提交保证书和工装样件及有限的支持数据
□等级3——向本公司提交保证书和工装样件及完整的支持数据
□等级4——向本公司提交保证书和本公司规定的其它要求
□等级5——在供应商制造厂备有保证书、工装样件和完整的支持数据以供评审
提交资料及产品状态
□1、产品检具、夹具是否标定合格?
是□否□
□2、产品是否符合合格标定的检具、夹具?
是□否□
□3、产品提交时是否同时提交尺寸检验简图?
是□否□
□4、是否提交合格尺寸结果或尺寸检查报告?
是□否□
□5、是否提交同设计部门共同签字确认DVP&R?
是□否□
□6、是否用指定材料制造(包含指定材料供应商)?
是□否□
□7、是否提交合格材料结果及材料试验报告?
是□否□
□8、是否提交合格性能结果或性能试验报告?
是□否□
□9、产品是否满足功能要求?
是□否□
□10、提供的产品是否有样件标识,并标识顺序号?
是□否□
提交结果评价
□以上提交结果满足所有图样和规范要求
□以上提交结果不完全满足所有图样和规范要求,其解释是
声明
我在此声明,本保证书使用的工装样件是我们的代表性零件,已符合奇瑞公司图样和规范的要求。
并且,所提交的资料真实可靠。
解释/说明:
印刷体姓名:
职务:
电话号码:
传真号码:
供应商授权代表签字:
日期:
以下由奇瑞公司填写
工装样件提交保证书处理意见:
□批准□拒绝零件功能批准:
□批准
□其它□放弃
奇瑞公司代表确认:
日期:
编号:
QCX02.002-002
GuaranteeofOTSSubmission
ReportNumber:
PartName:
PartNumber:
Safetyand/orRegulations □Yes □No E/CLevelDrawing:
DateofChange:
ApplicableVehicle:
Weight(kg):
DrawingNo.:
PurchaseOrderNo.:
PurchaseEngineer:
TestToolNo.:
ChangeLeveloftool:
DateofApproval:
InformationofSupplier
Supplier:
SupplierNo.:
Address:
ZipCode:
EngineManufacturer:
CheryAutomobileCompanyLimited.
ReasonforSubmission
□FirstSubmission□Changedtootheroptionalstructuresormaterials
□EngineeringModification□ErrorCorrection
□Others
Note:
Doesthispartcontainanyrestrictedmaterialormaterialthatareportisrequired
□Yes □No
Isthepartlabeledwithcorrespondingproductsymbols?
□Yes □No
SubmissionLevelRequired(Selectoneofthefollowinglevels)
□Level1——SubmitonlytheGuaranteetotheCompany(ifitisdeterminedasanappearanceitem,theappearanceapprovalreportisrequired.)
□Level2——SubmittheGuaranteeandOTS,aswellaslimitedsupportdata,totheCompany
□Level3——SubmittheGuaranteeandOTS,aswellascompletesupportdata,totheCompany
□Level4——SubmittheGuaranteeandotherdocumentsrequiredbytheCompany
□Level5——PreparetheGuarantee,OTSandcompletesupportdatainthefactoryofthesupplierforreviews
DocumentsSubmittedandProductState
□1.Isthetesttoolandfixtureoftheproductcalibratedcorrectly?
Yes□No□
□2.Doestheproductconformtoqualifiedcalibratedtesttoolsandfixtures?
Yes□No□
□3.Isadimensioninspectiondrawingsubmittedattachedtotheproduct?
Yes□No□
□4.Isthequalifieddimensionresultordimensioninspectionreportsubmitted?
Yes□No□
□5.IstheDVP&RsignedtogetherwiththeDesignDepartmentsubmitted?
Yes□No□
□6.Isthespecifiedmaterialusedformanufacturing(includingthespecifiedsupplier)?
Yes□No□
□7.Isthequalifiedmaterialresultormaterialtestreportsubmitted?
Yes□No□
□8.Isthequalifiedperformanceresultorperformancetestreportsubmitted?
Yes□No□
□9.Istheproductcompliantwithrequirementsonthefunction?
Yes□No□
□10.Istheproductprovidedwiththesamplesymbolandsequencenumber?
Yes□No□
AppraisalonSubmissionResults
□Theabovesubmissionresultscomplywithrequireemntsofalldrawingsandcriterions.
□Theabovesubmissionresultsarenotfullyincompliancewithrequirementsofalldrawingsandcriterions,forwhichthereasonis.
Declaration
I,hereby,declarethatOTSusedintheguaranteeisourtypicalpartandcomplywiththerequirementofdrawingsandcriterionsofChery,andalldocumentssubmittedaretrueandreliable.
Explanation:
Printedname:
Title:
Tel:
Fax:
Signedbyauthorizedrepresentativeofsupplier:
Date:
FilledbyChery
OpiniononguaranteeofOTSsubmission:
□Approval□Disapproval
□Others
Approvalofpartfunctions:
□Approval
□Abandon
ConfirmedbyrepresentativeofChery:
Date:
编号:
QCX02.002-002
样件检测报告
SamplingTestReport
报告编号
ReportNumber:
□01尺寸检测DimensionTest
□02材料检测MaterialTest
□03性能检测PerformanceTest
□04其他Others
□首次抽样Firstsampling
□再次抽样Secondsampling
□第三次抽样Thirdsampling
□新的零部件Newparts
□产品变更Productmodification
□生产迁移Productiontransition
□生产过程变更Changeofproductionprocess
□长期生产停顿Long-termproductionstop
□新的二级供应商Thenewsecond-levelsupplier
供应商名称SupplierName
PartNumber
零件号
PartNo.
供应商代码SupplierNo.
PartName
零件名称
PartName
编号S/N
要求Requirement
供应商测量结果SupplierTestResults
评价Appraisal
合格/不合格Qualified/Unqualified
奇瑞公司测量结果CheryTestResults
评价Appraisal
合格/不合格Qualified/Unqualified
供应商确认:
ConfirmedbySupplier:
备注:
Remark:
奇瑞公司结论:
CheryConclusion:
通过Pass
□
带条件通过Passwithconditions
□
拒收,要求再次抽样Reject,re-samplingrequired
□
姓名:
Name:
部门:
Department:
电话/传真Tel/Fax
签名:
Signature:
日期:
Date:
姓名:
Name:
部门:
Department:
电话/传真Tel/Fax
主管签名:
SignedbySupervisor:
日期:
Date:
编号:
QCX02.002-003
第一联存档第二联质保部第三联设计部门第四联供应商
尺寸认可报告
DimensionApprovalReport
报告编号ReportNumber:
供应商名称Supplier
PartNumber
零件号
PartNumber
检验机构名称
NameofInspectionFacility
PartName
零件名称
PartName
项目
Item
尺寸/规范
Dimension/Specification
奇瑞公司测量结果
CheryTestResults
合格
Qualified
不合格
Unqualified
备注(Remark):
认可结论ValidationResults:
□认可Approval
□临时认可TemporaryApproval
□拒绝Disapproval
编制Compiledby:
日期Date:
审核Auditedby:
日期Date:
编号:
QCX02.002-004
材料认可报告
MaterialApprovalReport
报告编号ReportNumber:
第一联存档第二联质保部第三联材料部门第四联设计部门第五联供应商
总成零件号:
AssyPartNo
总成零件名称:
AssyPartName
总成零部件厂家:
AssyPartSupplier
序号
No.
分零件号PartNo.
分零件名称
PartName
材料
Material
检测标准
InspectionStandard
原材料厂商
RawMaterialSupplier
实验报告编号
TestReportNo.
检测机构
TestFacility
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
认可结论ValidationResults:
□认可Approval
□临时认可TemporaryApproval
□拒绝Disapproval
备注Remark:
编制:
Compiledby
审核:
Auditedby
批准:
Approvedby
编号:
QCX02.002-005
性能认可报告
PerformanceApprovalReport
报告编号ReportNumber:
零件号:
PartNo
零件名称:
PartName
供应商:
Supplier
应用车型:
AppliedCar
检验依据:
TestBasis
试验机构:
TestFacility:
试验报告编号:
TestReportNo
认可结论ValidationResults:
□认可Approval
□临时认可TemporaryApproval
□拒绝Disapproval
等效认可EquivalentApproval
产品设计工程师/日期:
ProductDesignEngineer/Date
采购质量工程师/日期:
ProcurementQualityEngineer/Date
说明:
Explanation:
备注:
性能认可结论包括以下三种
Remark:
Theresultofperformanceapprovalmaybe:
1.认可:
满足产品材料定义,材料标准或双方认可的技术要求;
1、Approval:
meetthedefinitionandstandardofproductmaterialortechnicalrequirementsapprovedbybothparties;
2.拒绝:
材料性能不满足产品定义要求;
2、Disapproval:
Thematerialperformanceshallnotmeettherequirementsofproductdefinition;
3.临时认可:
材料某项性能不合格,但对产品功能要求影响不大。
3、TemporaryApproval:
Someperformanceofthematerialisunqualifiedbutwithoutseriousimpactonproductfunction.
编制Compiledby:
日期Date:
审核Auditedby:
日期Date:
第一联存档第二联质保部第三联设计部门第四联供应商
编号:
QCX02.002-006
外观批准报告
AppearanceApprovalReport
报告编号ReportNumber:
(PartNumber):
零件号
(ApplicableVehicles):
图样号
(DrawingNumber)
适用车型
(E/CLevel):
(PartName):
零件名称
(ModificationDate):
工程更改等级
更改日期
(SupplierCode):
(SupplierName):
供应商名称
(Tel.&Add.):
供应商代码
电话及地址
提交原因:
□零件提交保证书□特殊样品□再提交□表面预处理
□第一批发运□工程更改□其它
ReasonforSubmission:
□PartSubmissionGuarantee□SpecialSample□Resubmission□SurfacePretreatment
□Firstbatchfordelivery□EngineeringModification□Others
表面品质评价AppraisalonSurfaceQuality
纹理代码TextureNo.
供应商表面加工资料及评价SurfaceTreatmentInformationandAppraisalofSupplier
奇瑞公司判定判定标记
DeterminationMarksofChery
表面处理工艺SurfaceTreatmentProcess
供应商意见OpinionofSupplier
纠正并继续CorrectionandContinuity
纠正和再提交CorrectionandResubmission
表面特性合格QualifiedSurf