H3C路由学习笔记静态路由.docx
《H3C路由学习笔记静态路由.docx》由会员分享，可在线阅读，更多相关《H3C路由学习笔记静态路由.docx（19页珍藏版）》请在冰豆网上搜索。
H3C路由学习笔记静态路由
H3C路由（MSR26-30）
1、进入系统视图
Startupconfigurationfiledoesnotexist.
Performingautomaticconfiguration...PressCTRL_Dtobreak.
------------------------按Ctrl+D键终止设备查找自动配置
Automaticconfigurationattempt:
1.
Notreadyforautomaticconfiguration:
nointerfaceavailable.
Waitingforthenext...
Automaticconfigurationisaborted.-------按Ctrl+D键后放弃自动配置的尝试
Lineaux0isavailable.
PressENTERtogetstarted.---------------到这里系统启动完毕，按回车键
%Aug2209:
19:
53:
3182014H3CSHELL/5/SHELL_LOGIN:
TTYloggedinfromaux0.
--------------再按一次回车键
system-view
[H3C]
2、修改路由器名称
sys
[H3C]sysname名称
如将默认的路由器名称改为RoNetwork_Dept，Ro表示设备类型为路由器，Network_Dept表示部门名称，以后看到这个名称就知道这是什么设备、在什么位置。
建议以后都采用这种方式来给设备命名，以方便管理。
[H3C]sysnameRoNetwork_Dept
[RoNetwork_Dept]
如果要恢复默认名称，使用undosysname命令：
[RoNetwork_Dept]undosysname
[H3C]
3、显示路由表
（1）IPv4
显示路由表概要信息：
[RoNetwork_Dept]displayiprouting-table
显示路由表详细信息：
[RoNetwork_Dept]displayiprouting-tableverbose
显示某种路由协议的信息：
[RoNetwork_Dept]displayiprouting-tableprotocol{bgp|direct|guard|isis|ospf|rip|static}
还有其他信息，可使用？
显示帮助以便选择：
[RoNetwork_Dept]displayiprouting-table?
（2）IPv6
只需将IPv4的命令中ip替换成ipv6即可。
4、配置接口
sys
system-view
[H3C]int接口名称
如配置G0/0接口：
[RoNetwork_Dept]intg0/0
[RoNetwork_Dept-GigabitEthernet0/0]---------进入接口配置视图
配置IP地址：
[RoNetwork_Dept-GigabitEthernet0/0]ipadd12.0.0.1?
-----后面跟掩码长度也行，跟掩码也行
INTEGER<1-31>IPmasklength
X.X.X.XIPmask
[RoNetwork_Dept-GigabitEthernet0/0]ipadd12.0.0.124----24表示掩码长度为24位，和255.255.255.0等效
[RoNetwork_Dept-GigabitEthernet0/0]undoshutdown-----激活接口
[RoNetwork_Dept-GigabitEthernet0/0]disintg0/0-----查看接口信息
5、信息回显及tracert
为了防止命令被系统输出的消息打断，可以配置信息回显：
[RoNetwork_Dept]info-centersynchronous
为防止tracert超时，链路两端的设备都要开启以下功能：
[RoNetwork_Dept]ipredirectsenable开启设备的ICMP重定向报文的发送功能
[RoNetwork_Dept]ipttl-expiresenable 开启设备的ICMP超时报文的发送功能
[RoNetwork_Dept]ipunreachableenable开启设备的ICMP目的不可达报文的发送功能
6、配置静态路由
拓扑图：
RoNetwork_Dept端：
sys
SystemView:
returntoUserViewwithCtrl+Z.
[H3C]sysRoNetwork_Dept
[RoNetwork_Dept]infosync
Info-centersynchronousoutputison.
[RoNetwork_Dept]intlo0
[RoNetwork_Dept-LoopBack0]ipadd192.168.1.124
[RoNetwork_Dept-LoopBack0]intg0/0
[RoNetwork_Dept-GigabitEthernet0/0]ipadd12.0.0.124
[RoNetwork_Dept-GigabitEthernet0/0]undosh
[RoNetwork_Dept-GigabitEthernet0/0]iproute192.168.2.2255.255.255.25512.0.0.2
[RoNetwork_Dept]%Aug2211:
45:
32:
4152014RoNetwork_DeptIFNET/3/PHY_UPDOWN:
PhysicalstateontheinterfaceGigabitEthernet0/0changedtoup.
%Aug2211:
45:
32:
4162014RoNetwork_DeptIFNET/5/LINK_UPDOWN:
LineprotocolstateontheinterfaceGigabitEthernet0/0changedtoup.-------系统发出的消息，g0/0接口已经up了
[RoNetwork_Dept]disipro
Destinations:
17Routes:
17
Destination/MaskProtoPreCostNextHopInterface
0.0.0.0/32Direct00127.0.0.1InLoop0
12.0.0.0/24Direct0012.0.0.1GE0/0
12.0.0.0/32Direct0012.0.0.1GE0/0
12.0.0.1/32Direct00127.0.0.1InLoop0
12.0.0.255/32Direct0012.0.0.1GE0/0
127.0.0.0/8Direct00127.0.0.1InLoop0
127.0.0.0/32Direct00127.0.0.1InLoop0
127.0.0.1/32Direct00127.0.0.1InLoop0
127.255.255.255/32Direct00127.0.0.1InLoop0
192.168.1.0/24Direct00192.168.1.1Loop0
192.168.1.0/32Direct00192.168.1.1Loop0
192.168.1.1/32Direct00127.0.0.1InLoop0
192.168.1.255/32Direct00192.168.1.1Loop0
192.168.2.2/32Static60012.0.0.2GE0/0
224.0.0.0/4Direct000.0.0.0NULL0
224.0.0.0/24Direct000.0.0.0NULL0
255.255.255.255/32Direct00127.0.0.1InLoop0
[RoNetwork_Dept]ping192.168.2.2---------使用ping命令测试路由是否配置正确
Ping192.168.2.2（192.168.2.2）:
56databytes,pressCTRL_Ctobreak
56bytesfrom192.168.2.2:
icmp_seq=0ttl=255time=1.457ms
56bytesfrom192.168.2.2:
icmp_seq=1ttl=255time=1.113ms
56bytesfrom192.168.2.2:
icmp_seq=2ttl=255time=1.168ms
56bytesfrom192.168.2.2:
icmp_seq=3ttl=255time=1.189ms
56bytesfrom192.168.2.2:
icmp_seq=4ttl=255time=1.049ms
---Pingstatisticsfor192.168.2.2---
5packetstransmitted,5packetsreceived,0.0%packetloss
round-tripmin/avg/max/std-dev=1.049/1.195/1.457/0.140ms
[RoNetwork_Dept]%Aug2211:
49:
29:
3042014RoNetwork_DeptPING/6/PING_STATISTICS:
Pingstatisticsfor192.168.2.2:
5packetstransmitted,5packetsreceived,0.0%packetloss,round-tripmin/avg/max/std-dev=1.049/1.195/1.457/0.140ms.
[RoNetwork_Dept]
RoNetCenter端：
sys
SystemView:
returntoUserViewwithCtrl+Z.
[H3C]sysRoNetCenter
[RoNetCenter]infosync
Info-centersynchronousoutputison.
[RoNetCenter]intlo0
[RoNetCenter-LoopBack0]ipadd192.168.2.232
[RoNetCenter-LoopBack0]intg0/0
[RoNetCenter-GigabitEthernet0/0]ipadd12.0.0.224
[RoNetCenter-GigabitEthernet0/0]undosh
[RoNetCenter-GigabitEthernet0/0]quit
[RoNetCenter]ipro192.168.1.1255.255.255.25512.0.0.1
[RoNetCenter]disipro
Destinations:
14Routes:
14
Destination/MaskProtoPreCostNextHopInterface
0.0.0.0/32Direct00127.0.0.1InLoop0
12.0.0.0/24Direct0012.0.0.2GE0/0
12.0.0.0/32Direct0012.0.0.2GE0/0
12.0.0.2/32Direct00127.0.0.1InLoop0
12.0.0.255/32Direct0012.0.0.2GE0/0
127.0.0.0/8Direct00127.0.0.1InLoop0
127.0.0.0/32Direct00127.0.0.1InLoop0
127.0.0.1/32Direct00127.0.0.1InLoop0
127.255.255.255/32Direct00127.0.0.1InLoop0
192.168.1.1/32Static60012.0.0.1GE0/0
192.168.2.2/32Direct00127.0.0.1InLoop0
224.0.0.0/4Direct000.0.0.0NULL0
224.0.0.0/24Direct000.0.0.0NULL0
255.255.255.255/32Direct00127.0.0.1InLoop0
[RoNetCenter]
配置等价静态路由
RoNetwork_Dept端：
[RoNetwork_Dept]intg0/1
[RoNetwork_Dept-GigabitEthernet0/1]ipadd21.0.0.124
[RoNetwork_Dept-GigabitEthernet0/1]undosh
[RoNetwork_Dept-GigabitEthernet0/1]quit
[RoNetwork_Dept]ipro192.168.2.2255.255.255.25521.0.0.2
[RoNetwork_Dept]disipro
Destinations:
21Routes:
22
Destination/MaskProtoPreCostNextHopInterface
0.0.0.0/32Direct00127.0.0.1InLoop0
12.0.0.0/24Direct0012.0.0.1GE0/0
12.0.0.0/32Direct0012.0.0.1GE0/0
12.0.0.1/32Direct00127.0.0.1InLoop0
12.0.0.255/32Direct0012.0.0.1GE0/0
21.0.0.0/24Direct0021.0.0.1GE0/1
21.0.0.0/32Direct0021.0.0.1GE0/1
21.0.0.1/32Direct00127.0.0.1InLoop0
21.0.0.255/32Direct0021.0.0.1GE0/1
127.0.0.0/8Direct00127.0.0.1InLoop0
127.0.0.0/32Direct00127.0.0.1InLoop0
127.0.0.1/32Direct00127.0.0.1InLoop0
127.255.255.255/32Direct00127.0.0.1InLoop0
192.168.1.0/24Direct00192.168.1.1Loop0
192.168.1.0/32Direct00192.168.1.1Loop0
192.168.1.1/32Direct00127.0.0.1InLoop0
192.168.1.255/32Direct00192.168.1.1Loop0
192.168.2.2/32Static60012.0.0.2GE0/0
21.0.0.2GE0/1
224.0.0.0/4Direct000.0.0.0NULL0
224.0.0.0/24Direct000.0.0.0NULL0
255.255.255.255/32Direct00127.0.0.1InLoop0
RoNetCenter端：
[RoNetCenter]intg0/1
[RoNetCenter-GigabitEthernet0/1]ipadd21.0.0.224
[RoNetCenter-GigabitEthernet0/1]undosh
[RoNetCenter-GigabitEthernet0/1]quit
[RoNetCenter]ipro192.168.1.1255.255.255.25521.0.0.1
[RoNetCenter]disipro
Destinations:
18Routes:
19
Destination/MaskProtoPreCostNextHopInterface
0.0.0.0/32Direct00127.0.0.1InLoop0
12.0.0.0/24Direct0012.0.0.2GE0/0
12.0.0.0/32Direct0012.0.0.2GE0/0
12.0.0.2/32Direct00127.0.0.1InLoop0
12.0.0.255/32Direct0012.0.0.2GE0/0
21.0.0.0/24Direct0021.0.0.2GE0/1
21.0.0.0/32Direct0021.0.0.2GE0/1
21.0.0.2/32Direct00127.0.0.1InLoop0
21.0.0.255/32Direct0021.0.0.2GE0/1
127.0.0.0/8Direct00127.0.0.1InLoop0
127.0.0.0/32Direct00127.0.0.1InLoop0
127.0.0.1/32Direct00127.0.0.1InLoop0
127.255.255.255/32Direct00127.0.0.1InLoop0
192.168.1.1/32Static60012.0.0.1GE0/0
21.0.0.1GE0/1
192.168.2.2/32Direct00127.0.0.1InLoop0
224.0.0.0/4Direct000.0.0.0NULL0
224.0.0.0/24Direct000.0.0.0NULL0
255.255.255.255/32Direct00127.0.0.1InLoop0
测试：
[RoNetwork_Dept]ping192.168.2.2
Ping192.168.2.2（192.168.2.2）:
56databytes,pressCTRL_Ctobreak
56bytesfrom192.168.2.2:
icmp_seq=0ttl=255time=0.935ms
56bytesfrom192.168.2.2:
icmp_seq=1ttl=255time=1.156ms
56bytesfrom192.168.2.2:
icmp_seq=2ttl=255time=0.732ms
56bytesfrom192.168.2.2:
icmp_seq=3ttl=255time=1.301ms
56bytesfrom192.168.2.2:
icmp_seq=4ttl=255time=0.733ms
---Pingstatisticsfor192.168.2.2---
5packetstransmitted,5packetsreceived,0.0%packetloss
round-tripmin/avg/max/std-dev=0.732/0.971/1.301/0.227ms
[RoNetCenter]ping-r192.168.1.1-------“-r”表示“Recordroute”，记录路由
Ping192.168.1.1（192.168.1.1）:
56databytes,pressCTRL_Ctobreak
56bytesfrom192.168.1.1:
icmp_seq=0ttl=255time=0.827ms
RR:
21.0.0.1
12.0.0.2
56bytesfrom192.168.1.1:
icmp_seq=1ttl=255time=0.964ms
RR:
12.0.0.1
12.0.0.2
56bytesfrom192.168.1.1:
icmp_seq=2ttl=255time=1.895ms
RR:
21.0.0.1
12.0.0.2
56bytesfrom192.168.1.1:
icmp_seq=3ttl=255time=0.673ms
RR:
12.0.0.1
12.0.0.2
56bytesfrom192.168.1.1:
icmp_seq=4ttl=255time=0.905ms
RR:
21.0.0.1
12.0.0.2
---Pingstatisticsfor192.168.1.1---
5packetstransmitted,5packetsreceived,0.0%packetloss
round-tripmin/avg/max/std-dev=0.673/1.053/1.895/0.432ms
---数据包被轮流在两条链路上发送，但是奇怪的是，只从一条链路返回，这与GNS3的Cisco路由器不一样，Cisco的是从哪条链路出去就从哪条链路返回：
参考：
R1#ping
Protocol[ip]:
TargetIPaddress:
192.168.2.2
Repeatcount[5]:
Datagramsize[100]:
Timeoutinseconds[2]:
Extendedcommands[n]:
y
Sourceaddressorinterface:
Typeofservice[0]:
SetDFbitinIPheader?
[no]:
Validatereplydata?
[no]:
Datapattern[0xABCD]:
Loose,Strict,Record,Timestamp,Verbose[none]:
r
Numberofhops[9]:
Loose,Strict,Record,Timestamp,Verbose[RV]:
r
%Noroomforthatoption
Loose,Strict,Record,Timestamp,Verbose[RV]:
Record
%Noroomforthatoption
Loose,Strict,Record,Timestamp,Verbose[RV]:
Sweeprangeofsizes[n]:
Typeescapesequence
升级会员 