特殊特性管理规定Word文档下载推荐.docx
《特殊特性管理规定Word文档下载推荐.docx》由会员分享,可在线阅读,更多相关《特殊特性管理规定Word文档下载推荐.docx(15页珍藏版)》请在冰豆网上搜索。
资材管理部
生产管理部
副总经理
批准
Approvedby总经理
修改/REVISIONSHEET
修改/Rev
日期/Date
编制/By
页码/Page
修改内容/Revisioncontents
00
2013.04.01
1.制定特殊特性管理规定
01
2013.10.01
1.长城汽车特殊特性标号更新
02
2017.02.04
1.DPCA,CAPSA,吉利汽车,
江淮汽车,知豆汽车,重庆力帆汽车,特殊特性标识增加
03
2019.02.19
1.VOLVO,车和家,威马,特殊特性标识增加
1目的
为了满足客户要求和相关安全及法规事项,所以制定以下规定用于合理的选择和管理特殊特性项目.
Producedproductsbythiscompanyaresafetyandsuitableforlaws,Thepurposeshallbereasonablychosenandmanagementspecialcharacteristicsthatisespeciallymanagedtofitcustomerrequirements.
2范围
适用于在平和精工生产的组装件(LATCH,HINGE,CHECKER,STRIKER)零部件(包含外包产品)和其他产品的设计及生产.
PyeonghwaAutomotivethatproduceproducts(LATCH,HINGE,CHECKER,STRIKER),parts(Includeoutsideproduct)thatareappliedtothedesignandproduction.
3定义
3.1特殊特性:
如果产品超过质量管理标准就会影响到产品的稳定性,组装性,功能和外观,并且违反政府的规定,所以在图面上标明法规要求事项,顾客要求事项,公司要求事项.
3.1Specialcharacteristics:
Itaffectsthequalityofmanufacturemanagement(product’sstability,Compliancewithgovernmentregulations,mountingproperty,function,appearanceEtc.)whenqualitycharacteristicgetoutofSPEC.ThisismarkedondrawingbylawRegulatoryRequirements,CustomizedRequirementsandcompanyrequirements.
3.1.1保安特性:
规定为可能引发与生命相关的重大事故的特性,为了防止此种事件的发生而必须要管理的组装件,零部件及其工程.
3.1.1Securitycharacteristics:
ProductscharacteristicsamongofthedefectincludesbeingthecauseoftheEquivalentofthegreatcasualtiesaccidentandthequalitycharacteristics,Productsandpartsthatrequirespecialmanagementforcompliance,relatingtotheprocessarethatthecause.
3.1.2重要特性:
规定为发生时对车辆和产品的可信性,耐久性引起严重质量问题的事项.或者是规定为对功能没有严重的损坏,但是可能降低性能,并引发顾客不满与影响生产能力,而要被重点管理的项目.
3.1.2Importantcharacteristics:
ThisincludesqualitycharacteristicsthathavefatallyaffectbringaboutcustomersdissatisfiedandReduceproductivity,
it'
simportanttobemanagedwhendefectoccurs.
3.1.3一般特性:
未包含在3.1,3.2项里的品质特性.
3.1.3Generalcharacteristics:
4职责
无
5作业流程
6程序
6.1选定特殊特性的标准/SpecialcharacteristicsSelectioncriteria
6.1.1与以下规定有关的事项,可选定为特殊特性.
6.1.1QualitycharacteristicsselecttheSpecialcharacteristicsthatthefollowingparagraph
选定标准
Selectioncriteria
根据设计及工程FMEA选定
SelectioncriteriabydesignandprocessFMEA
严重度
发生率
Severity
Occurrence
安全法规
特性
Securitycharacteristics
·
安全法规有关的特性
Safetyandthelegal
requirements
客户指定
Specifycustomers
10
3以上
9
4以上
重要特性Importantcharacteristics
8
5以上
7
6以上
6
7以上
6.2特殊特性的变更
6.2Changeofspecialcharacteristics
6.2.1根据客户要求而制定的特殊特性可以得到客户的同意后进行变更.
6.2.1Achangeofthespecialcharacteristicsspecifiedbythecustomerdemandtochangeaftercustomerapproval.
6.2.2通过CFT协议可以变更.(设计变更,工程变更或者发生太多不良时)
6.2.2ChangescouldoccurattheCFTconsultationresultschange(DesignChanges,ProcessChanges,Badbunch)
6.3特殊特性标记方法/HowtoDisplaySpecialcharacteristics
6.3.1标记号:
附录1.特殊特性分类标号
6.3.1Symbol:
Attachments1.SubjecttoSpecialcharacteristicsclassificationsymbol.
6.3.2表示对象及方法
6.3.2Displaytargetandway
6.3.2.1如果客户规定特殊特性的标号,就可以按照客户要求在客户图面上标记客户要求的特殊特性标号.
6.3.2.1Onlydrawingsubmittedtothecustomerrecordssymbolswhenthedisplayspecialcharacteristicstothecustomerifregulationorrequested.
6.3.2.2假如特殊特性的产品是购买品,可在供应商提供的图面上标记PHA的特殊特性标号.
6.3.2.2ThisCompany’ssymbolusetodisplayatcollaboration’sdrawingofferedwhenifpurchasingproductsinthespecialcharacteristics.
6.3.2.3特殊特性需要使用PHA的标号,并标记在FMEA,管理计划书,制造图面,作业标准,检查基准书.需要提交客户时以使用客户的标识为原则,但客户允许时可以使用PHA的标识.
6.3.2.3SpecialcharacteristicsaredisplayedontheFMEA,ManagementPlan,Manufacturingdrawing,workstandard,InspectioncriteriadocumentEtc.bythiscompany’ssymbol.Exceptionally,Inthecaseofdocumentssubmittedtocustomerinprinciple,theuseofsymbolscustomerneedsbutsinceapprovalofcustomercanuseofthiscompany’ssymbol.
6.3.2.4特殊特性要根据相应的特性而制定和管理.
6.3.2.4Specialcharacteristicshasmanagedtofitthespecialcharacteristicsselectionpurposeofthecharacteristicsshouldbedisplayed.
6.4特殊特性管理方法/Specialcharacteristicsmanagementway
6.4.1客户指定的安全法规/重要产品可按如下表格内容管理。
除此之外客户个别指定的和认为需要管理的产品及管理项可以通过CFT检讨决定管理方法和检查周期.
6.4.1Security/importantpartsthatspecialcharacteristicsarespecifiedbythecustomerused,asshownbelowandspecialcharacteristicshasbeenappliedpartsbycustomer’srequirementcanbedeterminedmanagementwayandinspectioncyclethroughtheCFTreview.
产品名
特殊特性
管理项目
管理方法
检查周期
Partname
Specialcharacteristics
Managementitem
Managementway
Inspectioncycle
LATCH
安全法规S