8Port SAS RAID HBA安装过程.docx

1、8Port SAS RAID HBA安装过程8-Port SAS RAID HBA安装过程安装电池把卡安装到主机并连接SAS线，pci-e槽位可选注：对5240而言有一根（39cm）数据线不够长，只能接一个线控制一半的硬盘，如果要控制全部硬盘则需要另外购买一根专门的数据线，物料代码是SEUX9SA2Z（40cm）放入RAID-LiveCD-sparc-02，然后从光盘启动0 ok boot cdromSPARC Enterprise T5220, No KeyboardCopyright 2009 Sun Microsystems, Inc. All rights reserved.OpenB

2、oot 4.30.4, 8064 MB memory available, Serial #89100852.Ethernet address 0:21:28:4f:92:34, Host ID: 854f9234.Boot device: /pci0/pci0/pci1/pci0/pci1/pci0/usb0,2/hub4/device4/storage0/disk0:f File and args: SunOS Release 5.10 Version Generic_137137-09 64-bitCopyright 1983-2008 Sun Microsystems, Inc. Al

3、l rights reserved.Use is subject to license terms.Configuring devices.Using RPC Bootparams for network configuration information.Attempting to configure interface e1000g3.Skipped interface e1000g3Attempting to configure interface e1000g2.Skipped interface e1000g2Attempting to configure interface e10

4、00g1.Skipped interface e1000g1Attempting to configure interface e1000g0.Skipped interface e1000g0Reading ZFS config: done.Setting up Java. Please wait.Serial console, reverting to text installBeginning system identification.Searching for configuration file(s).Search complete.Discovering additional n

5、etwork configuration.Select a Language 0. English 1. French 2. German 3. Italian 4. Japanese 5. Korean 6. Simplified Chinese 7. Spanish 8. Swedish 9. Traditional ChinesePlease make a choice (0 - 9), or press h or ? for help: 0What type of terminal are you using? 1) ANSI Standard CRT 2) DEC VT52 3) D

6、EC VT100 4) Heathkit 19 5) Lear Siegler ADM31 6) PC Console 7) Sun Command Tool 8) Sun Workstation 9) Televideo 910 10) Televideo 925 11) Wyse Model 50 12) X Terminal Emulator (xterms) 13) CDE Terminal Emulator (dtterm) 14) OtherType the number of your choice and press Return: 3*Welcome to the RAID

7、Card LiveCD. Raid programs are in /opt/StorManTo perform command line RAID Card configuration, run arcconf at the promptSee Uniform Command-Line Interface Users Guide at under Sun StorageTek SAS RAID HBA for more information on using arcconfReboot the system when done configuring RAID logical drives

8、 to exit LiveCD*# #cd /opt/StorMan /进入/opt/StorMan目录# arcconf H /查看命令 | UCLI | Sun uniform command line interface | UCLI | Version 5.50 (B17530) | UCLI | (C) Adaptec 2003-2008 | UCLI | All Rights Reserved COPYBACK | toggles controller copy back mode CREATE | creates a logical device DATASCRUB | togg

9、les the controller background consistency check mode DELETE | deletes one or more logical devices FAILOVER | toggles the controller autotomatic failover mode GETCONFIG | prints controller information GETLOGS | gets controller log information GETSTATUS | displays the status of running tasks GETVERSIO

10、N | prints version information for all controllers IDENTIFY | blinks LEDS on device(s) connected to a controller KEY | installs a Feature Key onto a controller MODIFY | performs RAID Level Migration or Online Capacity Expansion RESCAN | checks for new or removed drives ROMUPDATE | updates controller

11、 firmware SETALARM | controls the controller alarm, if present SETCONFIG | restores the default configuration SETCACHE | adjusts physical or logical device cache mode SETNAME | renames a logical device given its logical device number SETPRIORITY | changes specific or global task priority SETSTATE |

12、manually sets the state of a physical or logical device TASK | performs a task such as build/verify on a physical or logical device # arcconf getconfig 1 /查看Raid卡配置Controllers found: 1-Controller information- Controller Status : Optimal Channel description : SAS/SATA Controller Model : Sun STK RAID

13、INT Controller Serial Number : 00947AA0806 Temperature : 52 C/ 125 F (Normal) Installed memory : 256 MB Copyback : Disabled Background consistency check : Disabled Automatic Failover : Enabled Defunct disk drive count : 0 Logical devices/Failed/Degraded : 0/0/0 - Controller Version Information - BIO

14、S : 5.2-0 (16732) Firmware : 5.2-0 (16732) Driver : 2.2-1 (1) Boot Flash : 5.2-0 (16732) - Controller Battery Information - Status : Optimal Over temperature : No Capacity remaining : 99 percent Time remaining (at current draw) : 3 days, 1 hours, 11 minutes-Logical device information- No logical dev

15、ices configured-Physical Device information- Device #0 Device is a Hard drive State : Ready Supported : Yes Transfer Speed : SAS 3.0 Gb/s Reported Channel,Device : 0,4 Reported Location : Enclosure 1, Slot 4 Reported ESD : 2,1 Vendor : HITACHI Model : H103014SCSUN146G Firmware : A2A8 Serial number :

16、 000946F4EVVE PCW4EVVE World-wide name : 5000CCA00A40742B Size : 140009 MB Write Cache : Disabled (write-through) FRU : None S.M.A.R.T. : No Device #1 Device is a Hard drive State : Ready Supported : Yes Transfer Speed : SAS 3.0 Gb/s Reported Channel,Device : 0,5 Reported Location : Enclosure 1, Slo

17、t 5 Reported ESD : 2,1 Vendor : HITACHI Model : H103014SCSUN146G Firmware : A2A8 Serial number : 000946F2LSPE PCW2LSPE World-wide name : 5000CCA00A3D1ABF Size : 140009 MB Write Cache : Disabled (write-through) FRU : None S.M.A.R.T. : No Device #2 Device is a Hard drive State : Ready Supported : Yes

18、Transfer Speed : SAS 3.0 Gb/s Reported Channel,Device : 0,6 Reported Location : Enclosure 1, Slot 6 Reported ESD : 2,1 Vendor : HITACHI Model : H103014SCSUN146G Firmware : A2A8 Serial number : 000947F68VWE PCW68VWE World-wide name : 5000CCA00A43CC13 Size : 140009 MB Write Cache : Disabled (write-thr

19、ough) FRU : None S.M.A.R.T. : No Device #3 Device is a Hard drive State : Ready Supported : Yes Transfer Speed : SAS 3.0 Gb/s Reported Channel,Device : 0,7 Reported Location : Enclosure 1, Slot 7 Reported ESD : 2,1 Vendor : HITACHI Model : H103014SCSUN146G Firmware : A2A8 Serial number : 000947F5ZME

20、E PCW5ZMEE World-wide name : 5000CCA00A434153 Size : 140009 MB Write Cache : Disabled (write-through) FRU : None S.M.A.R.T. : No Device #4 Device is an Enclosure services device Reported Channel,Device : 2,0 Enclosure ID : 0 Type : SES2 Vendor : ADAPTEC Model : Virtual SGPIO Firmware : 0001 Status o

21、f Enclosure services device Temperature : Normal Device #5 Device is an Enclosure services device Reported Channel,Device : 2,1 Enclosure ID : 1 Type : SES2 Vendor : ADAPTEC Model : Virtual SGPIO Firmware : 0001 Status of Enclosure services device Temperature : NormalCommand completed successfully.#

22、 # arcconf create /创建LOGICALDRIVE命令列表 Usage: CREATE LOGICALDRIVE Options Channel# ID# . noprompt Usage: CREATE LOGICALDRIVE RVOLUME LD# . noprompt = Create a new logical device. Options: Additional creation specifiers. Stripesize : Optional parameters for specifying a stripe size. STRIPE is specifie

23、d in kilobytes. 16, 32, 64, 128, 256*, 512 and 1024 are supported. Legs : Optional parameters for specifying number of sub-logical devices. LEG is the number of sub-logical devices for RAID level 50 or 60. RAID 50/60: 2 - 16 legs, 3 - 16 drives/leg, 48 drives max. Name : Optional parameter for speci

24、fying the name of the logical device. Priority : Initialization Priority for logical drive creation. Valid options are: HIGH*, MED, or LOW. Method : Initialization method for the logical device. Valid options include: BUILD, CLEAR, QUICK, and SKIP. SKIP skips initialization (for recovery only). Rcac

25、he : Read Cache setting for the logical device. Valid options are: RON and ROFF Wcache : Write Cache setting for the logical device. Valid options are: WT, WB, and WBB WT: write-through (Disabled) WB: write-back (Enabled) WBB: write-back (Enabled) when protected by battery Size: Size of the logical

26、device in megabytes. Use MAX to set size to all remaining available space. Raid#: Raid level for the new logical device. 0, 1, 1E, 10, 5, 5EE, 50, 6, 60, and volume are supported. RVOLUME Raid Level for a raid volume logical device. LD# Logical device numbers for the 2 or more distinct logical devic

27、es to be concatenated into the raid volume. RAID levels 0, 1, and 5 are supported RVOLUME members. All RVOLUME members must be the same RAID level. Channel# ID#: A list of space-delimited channel number and device number pairs for each device to add to the logical device. noprompt: Dont prompt for c

28、onfirmation. * default parameter in MOST circumstances# # arcconf create 1 LOGICALDRIVE max 10 0 4 0 5 0 6 0 7 /用4,5,6,7硬盘的所有空间创建raid 1+0Controllers found: 1Do you want to add a logical device to the configuration?Press y, then ENTER to continue or press ENTER to abort: yCreating logical device: Device 0devfsadm: mkdir