1、CATIAV56RGAP3Win64安装方法 HOW TO GET THE TARGET ID OF YOUR MACHINE=If you want to run the software with a nodelock license, you need toprovide the target ID of your machine when ordering the license key.The following explains how to obtain this ID.1. IF USING NEW DSLS LICENSING MODE-The target ID is a
2、character string composed of 3 letters, followed by a dash,followed by 16 hexadecimal characters.ex: GTF-E502DD633AF579A01/ Open a Command Prompt window and go to the CDROM drive root folder.2/ Run DSLicTarget.exe -t This will display the target ID of the machine.The target ID is also displayed: - i
3、n the Tools/Options/Licensing panel when running the application. - in the Nodelock Key Management (DSLS) tool, from Start/Programs/CATIA/Tools.2. IF USING LEGACY LICENSING MODE (LUM)-From an Explorer window, go to the CDROM drive root folder anddouble-click on i4tgtid.exe.A message box containing t
4、he win32mac target ID of the machine is displayed.The target ID is a character string composed of 8 hexadecimal characters.Make sure that the string win32mac is also displayed alongside the target ID.ex: 1C39FA57 win32macDepending on the network configuration of your machine, the win32mac target IDm
5、ight not be available or might be equal to 00000000.In this case, you have to use another tool, i4target.exe, in command-line mode:1/ Open a Command Prompt window and go to the CDROM drive root folder.2/ Run i4target.exe -z This will list enabled network adapter GUIDs that can be used for the target
6、 ID.2/ Run i4target -v This will help to map GUIDs to more friendly names.3/ Run i4target.exe -d 12345678-90AB-CDEF-1234-567890ABCDEF where 12345678-90AB-CDEF-1234-567890ABCDEF matches the desired network adapter GUIDs.4/ Run i4target.exe or i4tgtid.exe You should obtain a win32mac target ID.Note: D
7、o not repeat step 2 once you have a valid win32mac target ID.The target ID is also displayed: - in the Tools/Options/Licensing panel when running the application. - in the Nodelock Key Management tool (LUM), from Start/Programs/CATIA/Tools.此教程是安装_Win64后总结的安装方法,是否适用于其他版本亦未可知。 步骤:CATIA_V5-6R2013_GA_P3
8、一、安装前确认安装程序完整。二、运行setup.exe进行安装,安装位置自选,环境变量位置自选。安装orbix配置使用默认设置,服务器超时使用默认设置。不需要安装电子仓客户机,不需要安装联机文档,开始安装。三、CATIA主程序安装完成后,运行_SolidSQUAD_中的DSLS_17022013_64bit_SSQ.msi注意勾选这里。安装完成时会弹出License Administration Tool四、右击空白处,选Add new serverLicense server name填入本机计算机名,本机计算机名可以在计算机属性里复制到。右键刚创建的服务器名,选connect继续右键,选D
9、isplay properties,复制其中的Server id运行DSLS_LicGen_SSQ_v1.1.exe,输入本机名和Server id,点下方Generate!,保存在任意位置。在许可证管理器点许可(License),注册(Enroll),选择刚才保存的文件进行加载。在许可管理(License Administration)选项卡勾选计算机名,确定所有许可证加载成功。五、复制Licenses文件夹 到C:ProgramDataDassaultSystemes六、选择“开始”-“所有程序”-“CATIA P3”-“Tools”-“Settings Management V5-6R2013”-许可证发放选择至少一项带EDUCATIONAL或者ACADEMIC的选项。注意,千万不要选I3D-CATIA-3D INSIGHT 2 Configuration那个选项。若出现Settings Management V5-6R2013打开后假死或者无内容的情况,运行DSLS_17022013_64bit_SSQ.msi,卸载服务,再次运行DSLS_17022013_64bit_SSQ.msi,再次安装许可证服务,重复前面过程即可。七、破解完成
copyright@ 2008-2022 冰豆网网站版权所有
经营许可证编号:鄂ICP备2022015515号-1