H3C核心交换机S7506E网络维护手册簿.docx

1、H3C核心交换机S7506E网络维护手册簿网络设备维护手册第一章 交换机操作手册此部分档使用本项目交换机型号如下：S7506E/S5120/S5130/WX3024E1.1设备登陆1.1.1 Console登陆1、通过交换机Console 口进行本地登录是登录交换机的最基本的方式，也是配置通过其他方式登录交换机的基础。连接示意图如下：2、把电脑和交换机连接好后，交换机上电开机，然后在电脑上进行如下操作，首先点击开始程序附件通讯超级终端打开后出现下面图示，输入名称，可以任意输入。输入完成点击确定，出现下面界面，连接时使用选择COM口，一般台式机为COM1或COM2，而笔记本经过转接，可能会产生C

2、OM3或COM4，也有可能是其他的，你可以在下面的选择项里看到，选择完成后点击确定。通过上面的选择，现在到了对端口属性进行设置，一般情况下没有进行过修改，默认只要点击还原为默认值就可以了，然后再单击确定。之后敲回车即可，会出现H3C提示符，说明已经与交换机连接，可以进行配置了，如果没有可以重启交换机或检查连接是否正确。1.1.2 telnet登陆1、新建用户名密码local-user admin /admin为用户名 password cipher h3c123 /h3c123为密码 authorization-attribute level 3 /授权admin用户的等级为3,3为最高级 s

3、ervice-type telnet /授权admin用户的登陆方式，可以为ftp、telnet等#telnet server enable /开启telnet服务使用电脑连接至交换机：开始菜单-输入cmd,如下图，输入telnet 1.1.44.254，输入用户名密码admin/h3c123即可登录交换机1.2 交换机加电开机显示sarting. * * * * H3C S5510-24P BOOTROM, Version 142 * * * * Copyright (c) 2004-2008 Hangzhou H3C Tech. Co., Ltd. Creation date: Mar 1

4、2 2008, 11:17:30 CPU Clock Speed : 200MHz BUS Clock Speed : 33MHz Memory Size : 128MB The switch Mac is: 000F-E2B1-BD60Press Ctrl-B to enter Boot Menu. 1_ 0Auto-booting.Decompress Image.OK!Starting .* Copyright (c) 2004-2008 Hangzhou H3C Tech. Co., Ltd. All rights reserved. * Without the owners prio

5、r written consent, * no decompiling or reverse-engineering shall be allowed. *It will take a long time to get configuration file, please wait. Startup configuration file does not exist. User interface aux0 is available. /开机自检过程1.3 交换机常用Press ENTER to get started.%Apr 26 12:03:53:611 2000 H3C SHELL/4

6、/LOGIN: Console login from aux0sys /进入视图模式System View: return to User View with Ctrl+Z.H3C H3Csysname neiwang /对交换机进行命名neiwangdis cu /查看交换机配置# version 5.20, Release 5303# sysname neiwang# domain default enable system#domain system access-limit disable state active idle-cut disable self-service-url d

7、isable#interface NULL0#interface GigabitEthernet1/0/1#interface GigabitEthernet1/0/2#interface GigabitEthernet1/0/3#interface GigabitEthernet1/0/4#interface GigabitEthernet1/0/5#interface GigabitEthernet1/0/6#interface GigabitEthernet1/0/7#interface GigabitEthernet1/0/8#interface GigabitEthernet1/0/

8、9#interface GigabitEthernet1/0/10#interface GigabitEthernet1/0/11#interface GigabitEthernet1/0/12#interface GigabitEthernet1/0/13#interface GigabitEthernet1/0/14#interface GigabitEthernet1/0/15#interface GigabitEthernet1/0/16#interface GigabitEthernet1/0/17#interface GigabitEthernet1/0/18#interface

9、GigabitEthernet1/0/19#interface GigabitEthernet1/0/20#interface GigabitEthernet1/0/21#interface GigabitEthernet1/0/22#interface GigabitEthernet1/0/23#interface GigabitEthernet1/0/24#interface GigabitEthernet1/0/25 shutdown#interface GigabitEthernet1/0/26 shutdown#interface GigabitEthernet1/0/27 shut

10、down#interface GigabitEthernet1/0/28 shutdown#user-interface aux 0user-interface vty 0 4#returnneiwangneiwangvlan 25 /创建VLANneiwang-vlan25port GigabitEthernet 1/0/1 to GigabitEthernet 1/0/10 /给VLAN批量添加端口neiwang-vlan25qu /退出VLAN视图neiwanginterface vlan 25 /进入VLAN接口视图neiwang-Vlan-interface25 ip address

11、 192.168.120.1 24 /给VLAN添加IP地址 neiwang-Vlan-interface25qu /退出VLAn接口视图neiwangdis cu /再次查看交换机配置,可以看到多了一个VLAN及这个VLAN的IP地址# version 5.20, Release 5303# sysname neiwang# domain default enable system#vlan 1#vlan 25#domain system access-limit disable state active idle-cut disable self-service-url disable#i

12、nterface NULL0#interface Vlan-interface25 ip address 192.168.120.1 255.255.255.0#interface GigabitEthernet1/0/1 port access vlan 25#interface GigabitEthernet1/0/2 port access vlan 25#interface GigabitEthernet1/0/3 port access vlan 25#interface GigabitEthernet1/0/4 port access vlan 25#interface Gigab

13、itEthernet1/0/5 port access vlan 25#interface GigabitEthernet1/0/6 port access vlan 25#interface GigabitEthernet1/0/7 port access vlan 25#interface GigabitEthernet1/0/8 port access vlan 25#interface GigabitEthernet1/0/9 port access vlan 25#interface GigabitEthernet1/0/10 port access vlan 25#interfac

14、e GigabitEthernet1/0/11#interface GigabitEthernet1/0/12#interface GigabitEthernet1/0/13#interface GigabitEthernet1/0/14#interface GigabitEthernet1/0/15#interface GigabitEthernet1/0/16#interface GigabitEthernet1/0/17#interface GigabitEthernet1/0/18#interface GigabitEthernet1/0/19#interface GigabitEth

15、ernet1/0/20#interface GigabitEthernet1/0/21#interface GigabitEthernet1/0/22#interface GigabitEthernet1/0/23#interface GigabitEthernet1/0/24#interface GigabitEthernet1/0/25 shutdown#interface GigabitEthernet1/0/26 shutdown#interface GigabitEthernet1/0/27 shutdown#interface GigabitEthernet1/0/28 shutd

16、own#user-interface aux 0user-interface vty 0 4#returnneiwangtelnet server enable % Start Telnet server/下面是为交换机添加一个新用户操作neiwanglocal-user admin /添加新用户New local user added.neiwang-luser-adminpa sin admin /为新用户设置密码neiwang-luser-adminservice-type telnet level 3 /为新用户设置服务及权限neiwang-luser-adminqu/下面为该用户配置

17、telnet服务 neiwanguser-interface vty ? INTEGER First user terminal interface number to be configuredneiwanguser-interface vty 0 4 /进入telnet视图模式 neiwang-ui-vty0-4authentication-mode scheme ? /认证模式设置 none Login without checking password Authentication use password of user terminal interface scheme Authe

18、ntication use AAA neiwang-ui-vty0-4authentication-mode s neiwang-ui-vty0-4authentication-mode scheme /设备认证模式为用户名密码neiwang-ui-vty0-4quneiwangtelnet server enable /开启telnet服务neiwangsave ? STRING The name of specific file(*.cfg) safely Save current configuration safely neiwangsave s neiwangsave safely

19、/保存交换机设置,以防断电交换机配置丢失neiwangsave s ? save sftp shutdown-interval snmp-agent ssh ssl stp super switch-mode sysname neiwangsave safely The current configuration will be written to the device. Are you sure? Y/N:yPlease input the file name(*.cfg)flash:/startup.cfg(To leave the existing filename unchanged

20、, press the enter key):Validating file. Please wait.Now saving current configuration to the device. Saving configuration flash:/startup.cfg. Please wait.Configuration is saved to flash successfully.neiwangqusaveThe current configuration will be written to the device. Are you sure? Y/N:nsysSystem Vie

21、w: return to User View with Ctrl+Z.neiwang DHCP Snooping was enabled./下面为对VLAN及端口增加删除进行操作先输入 sys 进入全局模式，必须输，然后输命令前面字母按TABneiwangneiwangneiwangint neiwanginterface g neiwanginterface GigabitEthernet 1/0/15 /进入交换机端口模式neiwang-GigabitEthernet1/0/15port acc neiwang-GigabitEthernet1/0/15port access vlan 2

22、5 /单一端口添加到VLANneiwang-GigabitEthernet1/0/15port access vlan 26 /如果VLAN没有创建,提示如下 Error: This VLAN does not exist.neiwang-GigabitEthernet1/0/15quneiwangvlan 26neiwang-vlan26neiwang-GigabitEthernet1/0/15port access vlan 26neiwang-GigabitEthernet1/0/15qu/下面为对单一端口属性进行设置neiwangint g 1/0/25neiwang-GigabitE

23、thernet1/0/25sp neiwang-GigabitEthernet1/0/25speed 1000 /把25号端口强制为1000Mneiwang-GigabitEthernet1/0/25du neiwang-GigabitEthernet1/0/25duplex ful neiwang-GigabitEthernet1/0/25duplex full /把25号端口强制为全双工neiwang-GigabitEthernet1/0/25port neiwang-GigabitEthernet1/0/25port link-t neiwang-GigabitEthernet1/0/2

24、5port link-type ? access Access link-type hybrid Hybrid VLAN link-type trunk VLAN Trunk link-typeneiwang-GigabitEthernet1/0/25port link-type tr neiwang-GigabitEthernet1/0/25port link-type trunk /定义该端口为trunk属性 neiwang-GigabitEthernet1/0/25port trunk permit all ? % Unrecognized command found at positi

25、on.neiwang-GigabitEthernet1/0/25port trunk permit all ? /允许所有VLAN通过该端口 INTEGER VLAN ID all All the VLANsneiwang-GigabitEthernet1/0/25port trunk permit vlan all ? neiwang-GigabitEthernet1/0/25port trunk permit vlan all Please wait. Done. neiwang-GigabitEthernet1/0/25undo port link-type /取消该端口属性前面加undo Please wait. Done.neiwang-GigabitEthernet1/0/25sp neiwang-GigabitEthernet1/0/25speed ? 10 Specify speed of current port 10Mb/s 100 Specify speed of current port 100Mb/s 1000 Specify speed of current port 1000Mb/s auto Enable ports speed negotiation automatica