1、Optiplex常见机型最新BIOS中英文对照表Optiplex常见机型最新BIOS中英文对照表(有些项目为机器可选配置)General常规信息System BoardDisplays the following information: System information: DisplaysBIOS Version,Service Tag,Express Service Code,Asset Tag,Manufacture Date,and theOwnership Date. Memory information: DisplaysInstalled Memory,Memory Spee
2、d, Number of Active Channels,Memory Technology,DIMM_1 Size,DIMM_2 Size. Processor information: Displays theProcessor Type, Processor Speed, Processor Bus Speed, Processor L2 cache, Processor ID, Microcode Version, Multi Core CapableandHT Capable 64-bit Technology. Slot Information: Displays availabl
3、e slots on the system board.该项目显示以下详细信息: 系统信息: BIOS 版本, 机器服务编号, 快速服务代码, 资产编号, 出厂日期,Ownership日期. 内存信息: 安装内存容量;可用内存容量;当前内存频率;Memory通道; Memory技术; DIMM_1容量;DIMM _2容量 CPU 信息: CPU型号;CPU频率;CPU 总线 频率;CPU 2级缓存;CPU ID ;处理器代码版本;多核数;HT 64位技术。 插槽信息: 显示主板可用插槽信息。Date/TimeDisplays the system date and time. Changes
4、to the system date and time take effect immediately.显示当前的日期和时间。DrivesDiskette drive软驱设备This field determines how the BIOS configures floppy drives, Operating Systems with USB support will recognize USB Floppy drives regardless of this setting: Disable - All Floppy drive are disable Enable - All flop
5、py drive are enable.NOTE:The ;USB Controller; Setup option will affect floppy operation.该项可以设置软驱。 禁用 - 禁用所有软驱。 启用 - 启用所有软驱。注意:The ;USB Controller; 设置选项也将控制USB软驱。SATA OperationSATA设置configures the operating mode og the integrated hard drive controller RAID Autodetect / AHCI= RAID if signed drives, ot
6、herwise AHCI RAID Autodetect / ATA= RAID if signed drives, otherwise ATA RAID On / ATA= SATA is configured for RAID on every boot Legacy= The hard drive controller is configured for legacy modeNOTE:Legacy mode provides for compatibility with some older operating systsems that do not support native r
7、esources assigned to the drive controller.RAID Mode is incompatible with ImageServer. Please disable RAID mode if enabling Image Server.SATA Operation 设置选项:禁用,ATA , AHCI 和 Raid On默认设置是 Raid On=SATA 设置支持Raid RAID 自动检测 / AHCI= 设置自动检测RAID,如无Raid 即AHCI 模式 RAID 自动检测 / ATA= 设置自动检测RAID,如无Raid 即ATA 模式 RAID
8、On / ATA= 配置SATA模式每次开机都启动Raid。 Legacy= The hard drive controller is configured for legacy modeLegacy模式提供对一些旧操作系统的硬盘控制器的兼容模式。S.M.A.R.T. ReportingThis field controls whether hard drive errors for integrated drives are reported during system startup. This technology is part of the SMART(Self Monitoring
9、 Analysis and Reporting Technology) specification.This option is disabled by default.S.M.A.R.T.该项可以设置在系统启动时提供硬盘错误信息报告。该技术是S.M.A.R.T.(自我管理分析与报告技术)的一部分。默认禁用。DrivesEnables or disables the SATA drives connected to the system board.启用或禁用SATA设备连接到主板上。Boot SequenceSpecifies the order in which the computer
10、attempts to find an operating system from the devices specified in this list. Onboard or USB Floppy Onboard SATA Hard Drive Onboard or USB CD-Rom Drive计算机尝试从以下列表顺序启动: 软驱 SATA 硬盘 光驱System Configuration系统配置Integrated NICEnables or disables the integrated network card. You can set the integrated NIC to
11、: Disable Enable (default) Enable with PXE Enable with ImageSeverNOTE:PXE is needed only if intending to boost to an operating system located on a server, not if you are bootinng on an OS located on a hard drive in this system.启用和禁用集成网卡:该项可以设置: 禁用 启用(默认项目) 启用PXE 启用ImageSever( 该功能目前只在美国销售)USB Control
12、lerEnables or disables the integrated USB controller. You can set the USB controller to: Enable(default) Disable No bootNOTE:Operating systems with USB support will recognize USB Storage启用或禁用集成USB控制器。可设置: 启用(默认项目) 默认 不启动Parallel Port并口Identifies and defines the parallel port settings. You can set th
13、e parallel port to: Disable AT PS/2 (default) EPP ECP No DMA ECP DMA 1 ECP DMA 3并口设置选项: 禁用 AT PS/2 (默认选项) EPP ECP No DMA ECP DMA 1 ECP DMA 3Parallel Port AddressSets the base I/O address of the integrated parallel port.设置集成并口I/O地址。Serial Port #1Identifies and defines the serial port settings. You ca
14、n set the serial port to: Disable Auto(default) COM1 COM3NOTE:The Operating System may allocate resources even though the setting is disabled.串口设置选项:禁用,自动(默认选项)COM1,COM3,Miscellaneous Devices多种设备设置Enables or disables the following onboard devices: Front USB PCI slots Audio OptiPlex ON Reader Rear Qu
15、ad USB PCI Slots WiFi NIC Slot启用或禁用下面设备: 前置USB PCI插槽 声卡 OptiPlex ON Reader 后置 USB 无线网卡插槽Video显示设置Primary VideoThis field determines which video controller will become the primary video controller when 2 controllers are available in the system. This selection matters only if there are 2 video control
16、ler present. Auto(default) - Use the add-in video controller. Onboard/PEG- Use the integrated video controller unless a Graphic care is installed. A PCI Express Graphic(PEG) card will override and disable the integrated video controller.该页面可以设置当系统连接2块显卡时,哪一个为主显示。 自动(默认选项) - 使用连接的独立显卡。 主板/PEG- 不接独立显卡
17、时,将识别集成显卡,当 PCI Express Graphic(PEG) 显卡连接时禁用集成显卡。Performance性能设置Multi Core Support多核支持This field specifies whether the processor will have one or all cores enable. The performance of some application will improve with the additional cores.This option is enabled by default.该项是否启用1个或所有CPU的核数。增加CPU核数,将
18、提供很多程序的性能。默认启用。Hyper-Threading Technology超线程技术This option enables or disables the Hyper-Threading Technology. When disabled, only one thread per enabled core is enabledThis option is enabled by default.该项启用或禁用超线程技术。当禁用,仅仅单线程工作。默认启用。Intel; Turbo Boost TechnologyThis option enables or disables the Int
19、el; Turbo Boost Technology. When disabled, Intel; Turbo Boost Technology allows processor(s) to run at frequencies higher than the advertised frequencyThis option is enabled by default.启用或禁用Intel TurboBoost。禁用该项,Intel TurboBoost允许CPU工作在比标称频率高的频率允许。默认是启用。Intel; SpeedStep;This option enables or disabl
20、es the Intel; SpeedStep; mode of the processor. When disabled, the system is placed into the highest performance state and the Intel; SpeedStep; applet or native operating system driver are prevented from adjusting the processors performance. When enable. the Intel; SpeedStep;, enabled CPU is allowe
21、d to operate in multiple performance states.This option is enbaled by default.启用或禁用CPU性能模式。禁用该项,系统将始终工作在最高的性能状态。系统将不能自动调节CPU的性能。启用SpeedStep默认是启用。C stated ControlThis option enables or disables additional processor sleep states. The operating system may optionally use these for additional power savin
22、gs when idle.This option is enabled by default.启用或禁用额外的CPU的休眠状态。当CPU闲置时,操作系统可随意将额外的CPU进入休眠以节能。默认是启用。Limit CPUID ValueThis field limits the maximum value the processor Standard CPUID Function will support. Some operating systems will not complete installation when the maximum CPUID Function supported
23、 is greater than 3.This option is disabled by default.该项目可限制CPU标准的CPUID可支持的 最大量。有些操作系统在CPUID最大量支持超过3时,将无法正常安装。默认是禁用。Virtualization Support虚拟化支持Virtualization虚拟化This Option specifies whether a Virtual Machine Monitor (VMM) can utilize the additional hardware capabilities provided by Intel; Virtualiza
24、tion Technology.Enable Intel; Virtualization Technology- This option is enabled by default.该界面设置:虚拟计算机是否可以利用额外的硬件兼容性提供Intel 虚拟化技术。点击复选框,启用或禁用虚拟化技术默认:启用VT for Direct I/OEnables or disables the Virtual Machine Monitor (VMM) from utilizing the additional hardware capabilities provided by Intel; Virtuli
25、zation technology for direct I/O.Enable Intel; Virtualization Technology for Direct I/O- This option is disabled by default.该界面设置:虚拟计算机是否可以利用额外的硬件兼容性提供Direct I/O的Intel 虚拟化技术。点击复选框,启用或禁用Direct I/O的虚拟化技术。默认:禁用Trusted ExecutionThis field specifies whether a Measured Virtual Machine(MVMM) can utilize th
26、e additional hardware capabilities provided by Intel; Trusted Execution Technology. The TPM Virtualization Technology and Virtualization Technology for Direct I/O must be enable to use this feature.Enable Intel; Trusted Execution Technology - This option is disabled by default.该页面确认是否启用安全执行功能。TPM ,虚
27、拟化技术,Direct I/O的虚拟化技术都必须启用Trusted Execution功能。默认:禁用Security安全设置Administrative PasswordProvides restricted access to the computers system setup program in the same way that access to the system can be restricted with theSystem Password option.This option is not set by default.Admin 密码是对BIOS进行修改的权限。默认
28、没有设置。System PasswordDisplays the current status of the systems password security feature and allows a new system password to be assigned and verified.This option is not set by default.系统密码是BIOS开机的密码。默认没有设置。Password ChangesEnables or disables the user from changing the system password without the adm
29、inistrative password.This option is enabled by default.在没有Admin密码时,启用或禁用修改系统密码。默认启用修改系统密码。Admin Setup LockoutAdmin锁定Enables or disables the user from entering Setup when an Admin password is set.This option is disabled by default.当设置了Admin 密码,将阻止其他用户进入BIOS。Password Configuration密码配置These fields cont
30、rol the minimum and maximum number of characters allowed for Admin and System passwords. Changes to these fields are not active until they are committed via the apply button or saving changes before exiting setup. Admin Password Min Admin Password Max System Password Min System Password Max分别设置Admin
31、或系统密码的最小和最大的字符数设置。Strong Password强安全密码This field enforces strong passwords. If enabled, all passwords must contain at least one uppercase character, one lowercase character, and be at least 8 characters long. Enabling this feature automatically changes the default minimum password length to 8 charactersEnforce s
copyright@ 2008-2022 冰豆网网站版权所有
经营许可证编号:鄂ICP备2022015515号-1