霍尼韦尔PKSR400完整装机步骤.docx

1、霍尼韦尔PKSR400完整装机步骤PKS C400装机步骤Generate Configuration Files Run Experion PKS System Initialization DVD in Windows. 在一台计算机上放入INITIALIZATION DVD，自动运行安装程序。 选择 Launch Setup 选择Generate Configuration Files Click Next to continue. 选择所要安装的机器类型，上图是所支持的Station的型号。 这是所支持的Server的型号，下面以DELL T5500安装F-Station为例 这里输入

2、计算机名称、用户帐户和密码，在初始化盘作安装配置文件时，需要将用户的名字设为系统默认的名称：Experionadmin，密码随意。此用户名也可使用其它名称，但绝对不可以设为administrator或mngr或HPSinstall等名称，这些用户在使用初始化盘安装后会被禁掉，将无法登陆计算机。 如果所输入密码不符密码安全性时会有提示，可以选择忽略这个问题继续安装，也可返回修改密码。 这里选择网络类型及网络定义，点击下一步 这里是一个汇总的信息，点击Generate Product Install Config. Files，系统提示需要Installation DVD然后又出现节点类型画面 选

3、择好后点NEXT（安装服务器，请选择“Server(ESV)”；若安装操作站请选择相应类型的操作站，如“Console Station(ES-C)”或“Flex Station(ES-F)”） 按照以上选择后选NEXT（注意“Customer Information”里面的两项中填写项目名和用户公司名称）这里填入的Password应与前面的尽量保持一致，填好之后选NEXT,下一步中点Continue，下一步在Save Config.Files中选择一个保存配置文件的路径，保存好之后拷贝到U盘中将保存有安装配置文件“Config.Files”的U盘插到将要安装PKS R400的机器上，然后启动计

4、算机，插入Initialization光盘，启动时按着F12，进入到安装界面，系统会自动安装，在安装过程中系统会提示选择安装配置文件，选择到U盘中存的“Config.Files”即可。以下是详细安装步骤 In the target machine, insert Experion PKS System Initialization media and boot from the Experion PKS System Initialization media. Ensure that Boot Sequence in BIOS is set to boot from CD/DVD drive

5、first. Please keep watching the screen while booting, and press any key as soon as you see the message “Press any Key to Boot from CD or DVD” When the system boots from Experion PKS System Initialization media, WinPE is loaded into the target machine and the Experion PKS System Initialization PreIns

6、tall Utility screen appears. Browse to the configuration files and select InitMediaOptions.xml file. Click Next. This xml file can be located on a floppy disk, local system drive, or USB pen drive. Experion PKS System Initialization PreInstall Utility loads the configuration information from Options

7、 files. You can select “Use Drive C:” if they want to format only C drive and install OS on this drive. In this case, data on the other partitions will be retained. This option needs to be selected only if the system is having more than one partition and no raw partitions. Enter configuration detail

8、s for hard disk in the Disk Configuration section. Select the appropriate media location. 这里选DVD Enter the IP details, Subnet Mask, and Default Gateway in the Network Configuration for local machine section. Click Next. Select the I accept the terms in the License agreement radio button on the Licen

9、se Agreement screen after reading the EULA. Click Install. If it is a media-based install, the system prompts for the media. Once the OS installation is completed, insert Experion PKS System Initialization DVD again when you see this Experion PKS System Initialization R400.1 dialog box.If the autoru

10、n dialog pops up, close the dialog. During installation, if you see “Restart Now” prompts, no action is expected. The system will reboot automatically. During installation, if you see any “Found New Hardware” messages, no action needs to be taken. The system restarts several times automatically duri

11、ng Experion PKS System Initialization. If the media is already present in the local machine, installation proceeds without prompting Experion PKS System Initialization media.Install status will appear showing which feature is being installed/run, an approximate time for the feature and overall insta

12、ll to run and a description/message area that gives information for the install. The R400.1 Experion PKS System Initialization sequencer is running in the background sequentially running install features and communicating to the status. If product installation was selected installation DVD is prompt

13、ed. Click Cancel if you want to cancel the install. It can be restarted at the point of cancellation at a later time by running setup.exe. Click OK to finish the installation once you get the install complete message. The system reboots automatically. If it fails to automatically reboot, then reboot

14、 the computer manually. Click setup.exe to restart the installation Two methods to install PKS Configuration files to target computer.二. 安装后的系统配置1. If a software protection key (dongle，软件狗) is supplied in the Experion PKS media box, insert the key into one of USB interface in the computer.2. After i

15、nstallation, Check the FTE Device Index & the FTE setting as follows:(1) From Start menu, right click Network or right click the Network icon in notification area of task bar and select Properties.(2) Click Network and Sharing Center.Check the Network Adapter scanning order.(3) Select Manage network

16、 connections from the left menu.(4) Right-click one of the FTE network connections (Yellow or Green) and then click Properties.(5) Select Continue to the User Account Control Prompt.(6) Select Honeywell FTE Mux-IM Protocol Driver, and then click Properties.(7) Verify FTE MUX-IM Protocol Driver Prope

17、rties dialog: Select Configure tab.(8) Select the Honeywell FTE Adapter #1in the left pane. Set/Verify the values for the following: Device Index Value for the machine - Change the value to a unique number from 1-511.Verify the following values:The IPMC Destination Address (this is the multicast add

18、ress assigned to the FTE Community default as 234.5.6.7) UDP Destination Port, Default is 51966 UDP Source Ports Port, Default is 47837Note: You can modify the IPMC address and the UDP source and destination ports, but it is recommended to retain the default settings.Click OK.(9) From the Network Co

19、nnections window:Select the Honeywell FTE Adapter #1, right-click the adapter and select Properties.(10) Select Continue to the User Account Control Prompt if it appears.(11) Verify the FTE Adapter #1 Properties:Select Internet Protocol Version 4 (TCP/IPV4), select Properties.(12) Verify IP Address

20、and other IPV4 Settings. Correct any values that are incorrect or missing and then click OK.(13) Reboot your computer.(14) Log on back as local administrator.(15) Wait until the machine has completed all the process starts and network connections.Verify Network Settings using IPConfig /all command f

21、rom a command window:If FTE Mux Driver is working correctly, it will show up in the IPCONFIG as Honeywell FTE MUX-IM Virtual Miniport Driver.3. New Account and User GroupComputer manger configuration local user and groups right click “user” Click “new user” to create a new account Double click the N

22、ew Account Member of Add Advanced Find now Add the New Account to user group “Administrator” &”Product Administrator” 4. HOST ConfigurationYou must identify the computer name and associated IP address of each Experion PKS server and Console Station in the hosts file. Both server and client computers

23、 require a modified hosts file with identical entries, so you can edit the hosts file on one computer and then copy it to each computer in the Experion PKS system.The hosts file is located in C:WINDOWSsystem32driversetc.127.0.0.1 localhost10.38.1.129 PKSServerA PKSServerA010.38.1.131 PKSServerB PKSS

24、erverB010.38.1.133 STN0110.38.1.135 STN025. Experion PKS Patch Configuration The following section describes installed service patches, service packs and updates for the Honeywell Experion PKS Server. Includes upgrades, new system features and bug fixesThe procedure assumes the individual performing

25、 the build task is both fully trained and familiar with Honeywell Experion PKS Server software. He also has access to the Experion website and priviledges/access that allow them to download all current patches etc.Installation for each patch/upgrade will be described by its accompanying SCN (Softwar

26、e Change Notice) below is a table for record purposes and should be filled in when each patch is applied. PERC Firmware 6.3.0-0001,A12 MS Hotfix Controller Patch1 Server Patch 1 HMIWeb Patch 2 System Management Patch 2 ExperionPKS.R400.Server.Patch102.PAR1-J4C742 ExperionPKS_R400.1_HMIWeb_Patch_6_0_

27、143_5200_PAR1-JD8OA76. 安装中文Change System Locale to Chinese (Simplified, PRC). 将系统改为简体中文unlock logon for mngr. 解锁登陆mngr用户，可以参考下面截屏入下命令 Run gpedit.msc secpol.msc log on as mngr account, open Regional and Language Options, change formats & location to Chinese & China. log on as user-defined administrat

28、or account, open Regional and Language Options, change formats & location to Chinese & China, then change the system locale to Chinese (Simplified, PRC). reboot. Copy to reserved accounts ( check “Defalut user account” ). lock logon for mngr Open Registry Editor, navigate to HKEY_LOCAL_MACHINESOFTWA

29、REHoneywellExperion PKS Server Add a string value SQLCollation and modify its data as Chinese_PRC_CI_AS. 如下图所示 Bring the server down to Database Only level. Run command prompt as administrator , type installsqlobject EMSEvents /c 如下图所示详细设置步骤请参考附件7. 检查Dongle 和License 中文的安装很容易造成License的丢失，需要动作Change L

30、icense。否则 Server Redundancy 中的 hdwbld redun.hdw 不能执行。8. Configuring Experion server redundancy(1) Choose Start All Programs Honeywell Experion PKS Server Start-Stop Experion Server.The Experion PKS Server dialog box appears.Click the stop button.If prompted, click Yes to confirm the action.Wait for

31、the server to change to stop state. It may take several minutes for the Experion server to stop.(2)分别在两台服务器 (PKSServerA和PKSServerB)上, choose Start All Programs Honeywell Experion PKS Server Diagnostic Tools Experion Command Prompt to open the Experion Command Prompt window.在“Experion Command Prompt”命令行窗口中输入命令：hdwbld redun.hdw 并回车执行以上命令后，如果窗口提示errors为0，那么表示命令执行成功，重启两台服务器，当两台服务器重启后会自动互相识别，并分别变为“Primary”和“Backup”。两台冗余服务器互相识别出主、备后，需要对这两台服务器进行同步配置，如下：“Synchronizing the server databases” on page 115“Synchronizing the Engineering Repository database” on page 117“Synchronizing