8Port SAS RAID HBA安装过程Word格式.docx

1、Skipped interface e1000g2Attempting to configure interface e1000g1.Skipped interface e1000g1Attempting to configure interface e1000g0.Skipped interface e1000g0Reading ZFS config: done.Setting up Java. Please wait.Serial console, reverting to text installBeginning system identification.Searching for

2、configuration file（s）.Search complete.Discovering additional network configuration.Select a Language 0. English 1. French 2. German 3. Italian 4. Japanese 5. Korean 6. Simplified Chinese 7. Spanish 8. Swedish 9. Traditional ChinesePlease make a choice （0 - 9）, or press h or ? for help: 0What type of

3、 terminal are you using? 1） ANSI Standard CRT 2） DEC VT52 3） DEC VT100 4） Heathkit 19 5） Lear Siegler ADM31 6） PC Console 7） Sun Command Tool 8） Sun Workstation 9） Televideo 910 10） Televideo 925 11） Wyse Model 50 12） X Terminal Emulator （xterms） 13） CDE Terminal Emulator （dtterm） 14） OtherType the

4、number of your choice and press Return: 3*Welcome to the RAID Card LiveCD. Raid programs are in /opt/StorManTo perform command line RAID Card configuration, run arcconf at the promptSee Uniform Command-Line Interface Users Guide at under Sun StorageTek SAS RAID HBA for more information on using arcc

5、onfReboot the system when done configuring RAID logical drives to exit LiveCD# #cd /opt/StorMan /进入/opt/StorMan目录# arcconf H /查看命令 | UCLI | Sun uniform command line interface | UCLI | Version 5.50 （B17530） | UCLI | （C） Adaptec 2003-2008 | UCLI | All Rights Reserved COPYBACK | toggles controller copy

6、 back mode CREATE | creates a logical device DATASCRUB | toggles the controller background consistency check mode DELETE | deletes one or more logical devices FAILOVER | toggles the controller autotomatic failover mode GETCONFIG | prints controller information GETLOGS | gets controller log informati

7、on GETSTATUS | displays the status of running tasks GETVERSION | prints version information for all controllers IDENTIFY | blinks LEDS on device（s） connected to a controller KEY | installs a Feature Key onto a controller MODIFY | performs RAID Level Migration or Online Capacity Expansion RESCAN | ch

8、ecks for new or removed drives ROMUPDATE | updates controller firmware SETALARM | controls the controller alarm, if present SETCONFIG | restores the default configuration SETCACHE | adjusts physical or logical device cache mode SETNAME | renames a logical device given its logical device number SETPR

9、IORITY | changes specific or global task priority SETSTATE | manually sets the state of a physical or logical device TASK | performs a task such as build/verify on a physical or logical device # arcconf getconfig 1 /查看Raid卡配置Controllers found: 1-Controller information Controller Status : Optimal Cha

10、nnel description : SAS/SATA Controller Model : Sun STK RAID INT Controller Serial Number : 00947AA0806 Temperature : 52 C/ 125 F （Normal） Installed memory : 256 MB Copyback : Disabled Background consistency check : Automatic Failover : Enabled Defunct disk drive count : Logical devices/Failed/Degrad

11、ed : 0/0/0 - Controller Version Information BIOS : 5.2-0 （16732） Firmware : Driver : 2.2-1 （1） Boot Flash : Controller Battery Information Status : Over temperature : No Capacity remaining : 99 percent Time remaining （at current draw） : 3 days, 1 hours, 11 minutesLogical device information No logica

12、l devices configuredPhysical Device information Device #0 Device is a Hard drive State : Ready Supported : Yes Transfer Speed : SAS 3.0 Gb/s Reported Channel,Device : 0,4 Reported Location : Enclosure 1, Slot 4 Reported ESD : 2,1 Vendor : HITACHI Model : H103014SCSUN146G A2A8 Serial number : 000946F

13、4EVVE PCW4EVVE World-wide name : 5000CCA00A40742B Size : 140009 MB Write Cache : Disabled （write-through） FRU : None S.M.A.R.T. : Device #1 0,5 Enclosure 1, Slot 5 000946F2LSPE PCW2LSPE 5000CCA00A3D1ABF Device #2 0,6 Enclosure 1, Slot 6 000947F68VWE PCW68VWE 5000CCA00A43CC13 Device #3 0,7 Enclosure

14、1, Slot 7 000947F5ZMEE PCW5ZMEE 5000CCA00A434153 Device #4 Device is an Enclosure services device 2,0 Enclosure ID : Type : SES2 ADAPTEC Virtual SGPIO 0001 Status of Enclosure services device Normal Device #5Command completed successfully.# arcconf create /创建LOGICALDRIVE命令列表 Usage: CREATE LOGICALDRI

15、VE Options Channel# ID# Channel# ID# . noprompt LOGICALDRIVE RVOLUME LD# . noprompt = Create a new logical device. Options: Additional creation specifiers. Stripesize : Optional parameters for specifying a stripe size. STRIPE is specified in kilobytes. 16, 32, 64, 128, 256*, 512 and 1024 are support

16、ed. Legs Optional parameters for specifying number of sub-logical devices. LEG is the number of sub-logical devices for RAID level 50 or 60. RAID 50/60: 2 - 16 legs, 3 - 16 drives/leg, 48 drives max. Name Optional parameter for specifying the name of the logical device. Priority Initialization Prior

17、ity for logical drive creation. Valid options are: HIGH*, MED, or LOW. Method Initialization method for the logical device. Valid options include: BUILD, CLEAR, QUICK, and SKIP. SKIP skips initialization （for recovery only）. Rcache Read Cache setting for the logical device. RON and ROFF Wcache Write

18、 Cache setting for the logical device. WT, WB, and WBB WT: write-through （Disabled） WB: write-back （Enabled） WBB: write-back （Enabled） when protected by battery Size: Size of the logical device in megabytes. Use MAX to set size to all remaining available space. Raid#: Raid level for the new logical

19、device. 0, 1, 1E, 10, 5, 5EE, 50, 6, 60, and volume are supported. RVOLUME Raid Level for a raid volume logical device. LD# Logical device numbers for the 2 or more distinct logical devices to be concatenated into the raid volume. RAID levels 0, 1, and 5 are supported RVOLUME members. All RVOLUME me

20、mbers must be the same RAID level. Channel# ID#: A list of space-delimited channel number and device number pairs for each device to add to the logical device. noprompt: Dont prompt for confirmation. * default parameter in MOST circumstances# arcconf create 1 LOGICALDRIVE max 10 0 4 0 5 0 6 0 7 /用4,5,6,7硬盘的所有空间创建raid 1+0Do you want to add a logical device to the configuration?Press y, then ENTER to continue or press ENTER to abort: yCreating logical device: Device 0devfsadm: mkdir