Software ManualWord文件下载.docx

1、 support directdraw to accelerate and opening.1.3 engagementIn order to the simplify describe in this manual ,will describe as following .client software called softwareDVR DVS called equipmentClick to the left mouse button clickdouble clickRight click the right mouse button clickSecond : installati

2、on and unloadingThird: software running3.1Running and login 3.11 Double-click The shortcut or the TLClient.exe star to running the softwareFirst of all to use the software needs super user registration. Double-click , The dialog box as following Enter the user name, user password and reconfirmed pas

3、sword, Password with a minimum of six.and must and reconfirmed password. After successful Registration it will pop up dialog windows1.13 loginChoose the user name ,enter the password clink to enter the program. Or can choose “automatically logged on,” so will not appear on the window next time.3.2 i

4、ntroduction of the Software interfaceintroduction of the Software interface1:system and the button barInterface can be locked, minimize the window to the taskbar, close program operation.2:Tab barContain the function of the different software modelspreview ：Real-time preview on the deviceplayback :L

5、ocal video playback and remote playback Configuration: device management, remote device configuration and the local parameters set remote and local video playback Log: Local and remote Inquiry Map: Electronic Map 3 device treeShow all equipment and to add management group4 Preview Display WindowReal

6、-time preview of the device channel5 PTZ control windowFor PTZ control, adjust the picture6 Preview Control BarPreview control to stop, the client video, drawings, switching screen modes, full screen, rotation, etc.7 alarm information listDisplays short messages and other alertsFourth:Equipment Mana

7、gementBefore using the software to operate, need to add and configure the device operation. Click the tab bar Configure tab to enter configuration modeClick on the left navigation bar Device Manager item to enter the device management interface.Interface Description 1 navigation bar device tree3: Pa

8、cket group Control4: packet tree4.1 device tree configurationWhen the initial run the software, the list defaults to an empty tree, right-click any blank space can be a list of trees to add the region.Fill in the name of the regional title bar and click OK you can add a tree to the list area, and be

9、cause of this added area as the first area, there is no higher in the region area, the higher the regional name column blank.Regional add is complete, right-click the regional nodes may choose to sub-region, add the operation of equipmentRight-click the Add area, pop-up regional management menu.Sele

10、ct Add a sub-regional sub-regions can be added.Delete area will be removed in a selected state area.Note: If you remove the region contains other regions under, equipment or channels, then delete operation will not only delete the selected area, but will remove all of the regions under the region, e

11、quipment or channels; if the region is under the preview channel or Video will be given a warning.4.11 Manually add the deviceRight-click the Add area, pop-up regional management menu, select Add Device.OptionsExplainDevice nameAdd the device name it can be customizeddevice addressDevice IP address

12、or domain namedevice portdevice port numberchannel numberDevice Channel number, please fill in the actual situationUser name Device Registered User nameUser password Device Registered User password Local areathe name of the host region4.1.2 Search the LAN-line equipmentIn any regional / sub-regional

13、 node click, click the menu item in the search equipment, search the same LAN-line equipmentSelect a device, click on Add DeviceWhen the device information in the pop-up box, modify the device name so that the device name does not appear to repear.Fill in the device to log the user name and password

14、 , and then clink to confirm the settingThen continue to add other devices4.2 Grouping tree configurationIf the group did not contain any node in the tree, then to be add the node firstRight at the grouping column shows the space group management menu, click on Add Group itemEnter a group name, clic

15、k OK to add group.Group added successfully, you can access the list in the tree node to the next selected groupSelect the channel list tree node, click the Device Configuration window, configure the button bar add to select the channel added to the group tree is selectedGroup, the channel name to device name _ channel name