DS1302时钟+DS18B20用LCD1602显示系统很简单.docx

1、DS1302时钟+DS18B20用LCD1602显示系统很简单DS1302时钟+DS18B20用LCD1602显示（系统很简单）看仔细点啊 貌似很多这样的图但可不一样喔 最小系统是用AT89s52搭建的！记得回去自己用protues和Keil仿真一下，这样有利于进一步了解！故未将仿真好的代码上传，如果真的需要的话可以和我联系！程序代码：#include #include /#include LCD1602.h/#include DS1302.h#define uint unsigned int#define uchar unsigned charsbit DS1302_CLK = P17; /

2、实时时钟时钟线引脚sbit DS1302_IO = P16; /实时时钟数据线引脚sbit DS1302_RST = P15; /实时时钟复位线引脚sbit wireless_1 = P30;sbit wireless_2 = P31;sbit wireless_3 = P32;sbit wireless_4 = P33;sbit ACC0 = ACC0;sbit ACC7 = ACC7;char hide_sec,hide_min,hide_hour,hide_day,hide_week,hide_month,hide_year; /秒,分,时到日,月,年位闪的计数sbit Set = P2

3、0; /模式切换键sbit Up = P21; /加法按钮sbit Down = P22; /减法按钮sbit out = P23; /立刻跳出调整模式按钮sbit DQ = P10; /温度传送数据IO口char done,count,temp,flag,up_flag,down_flag;uchar temp_value; /温度值uchar TempBuffer5,week_value2;void show_time(); /液晶显示程序/*1602液晶显示部分子程序*/Port Definitions*sbit LcdRs= P25;sbit LcdRw= P26;sbit LcdEn

4、 = P27;sfr DBPort = 0x80;/P0=0x80,P1=0x90,P2=0xA0,P3=0xB0.数据端口/部等待函数*unsigned char LCD_Wait(void)LcdRs=0;LcdRw=1;_nop_();LcdEn=1;_nop_();LcdEn=0;return DBPort;/向LCD写入命令或数据*#define LCD_COMMAND0 / Command#define LCD_DATA1 / Data#define LCD_CLEAR_SCREEN0x01 / 清屏#define LCD_HOMING 0x02 / 光标返回原点void LCD_

5、Write(bit style, unsigned char input)LcdEn=0;LcdRs=style;LcdRw=0;_nop_();DBPort=input;_nop_();/注意顺序LcdEn=1;_nop_();/注意顺序LcdEn=0;_nop_();LCD_Wait();/设置显示模式*#define LCD_SHOW0x04 /显示开#define LCD_HIDE0x00 /显示关#define LCD_CURSOR0x02 /显示光标#define LCD_NO_CURSOR0x00 /无光标#define LCD_FLASH0x01 /光标闪动#define LC

6、D_NO_FLASH0x00 /光标不闪动void LCD_SetDisplay(unsigned char DisplayMode)LCD_Write(LCD_COMMAND, 0x08|DisplayMode);/设置输入模式*#define LCD_AC_UP0x02#define LCD_AC_DOWN0x00 / default#define LCD_MOVE0x01 / 画面可平移#define LCD_NO_MOVE0x00 /defaultvoid LCD_SetInput(unsigned char InputMode)LCD_Write(LCD_COMMAND, 0x04|

7、InputMode);/初始化LCD*void LCD_Initial()LcdEn=0;LCD_Write(LCD_COMMAND,0x38); /8位数据端口,2行显示,5*7点阵LCD_Write(LCD_COMMAND,0x38);LCD_SetDisplay(LCD_SHOW|LCD_NO_CURSOR); /开启显示, 无光标LCD_Write(LCD_COMMAND,LCD_CLEAR_SCREEN); /清屏LCD_SetInput(LCD_AC_UP|LCD_NO_MOVE); /AC递增, 画面不动/液晶字符输入的位置*void GotoXY(unsigned char x

8、, unsigned char y)if(y=0)LCD_Write(LCD_COMMAND,0x80|x);if(y=1)LCD_Write(LCD_COMMAND,0x80|(x-0x40);/将字符输出到液晶显示void Print(unsigned char *str)while(*str!=0)LCD_Write(LCD_DATA,*str);str+;/*DS1302时钟部分子程序*/typedef struct _SYSTEMTIME_unsigned char Second;unsigned char Minute;unsigned char Hour;unsigned cha

9、r Week;unsigned char Day;unsigned char Month;unsigned char Year;unsigned char DateString11;unsigned char TimeString9;SYSTEMTIME;/定义的时间类型SYSTEMTIME CurrentTime;#define AM(X)X#define PM(X)(X+12) / 转成24小时制#define DS1302_SECOND0x80 /时钟芯片的寄存器位置,存放时间#define DS1302_MINUTE0x82#define DS1302_HOUR0x84#define

10、DS1302_WEEK0x8A#define DS1302_DAY0x86#define DS1302_MONTH0x88#define DS1302_YEAR0x8Cvoid DS1302InputByte(unsigned char d) /实时时钟写入一字节(部函数) unsigned char i; ACC = d; for(i=8; i0; i-) DS1302_IO = ACC0; /相当于汇编中的 RRC DS1302_CLK = 1; DS1302_CLK = 0; ACC = ACC 1; unsigned char DS1302OutputByte(void) /实时时钟读

11、取一字节(部函数) unsigned char i; for(i=8; i0; i-) ACC = ACC 1; /相当于汇编中的 RRC ACC7 = DS1302_IO; DS1302_CLK = 1; DS1302_CLK = 0; return(ACC);void Write1302(unsigned char ucAddr, unsigned char ucDa)/ucAddr: DS1302地址, ucData: 要写的数据 DS1302_RST = 0; DS1302_CLK = 0; DS1302_RST = 1; DS1302InputByte(ucAddr); / 地址，命

12、令 DS1302InputByte(ucDa); / 写1Byte数据 DS1302_CLK = 1; DS1302_RST = 0;unsigned char Read1302(unsigned char ucAddr)/读取DS1302某地址的数据 unsigned char ucData; DS1302_RST = 0; DS1302_CLK = 0; DS1302_RST = 1; DS1302InputByte(ucAddr|0x01); / 地址，命令 ucData = DS1302OutputByte(); / 读1Byte数据 DS1302_CLK = 1; DS1302_RS

13、T = 0; return(ucData);void DS1302_GetTime(SYSTEMTIME *Time) /获取时钟芯片的时钟数据到自定义的结构型数组unsigned char ReadValue;ReadValue = Read1302(DS1302_SECOND);Time-Second = (ReadValue&0x70)4)*10 + (ReadValue&0x0F);ReadValue = Read1302(DS1302_MINUTE);Time-Minute = (ReadValue&0x70)4)*10 + (ReadValue&0x0F);ReadValue =

14、Read1302(DS1302_HOUR);Time-Hour = (ReadValue&0x70)4)*10 + (ReadValue&0x0F);ReadValue = Read1302(DS1302_DAY);Time-Day = (ReadValue&0x70)4)*10 + (ReadValue&0x0F);ReadValue = Read1302(DS1302_WEEK);Time-Week = (ReadValue&0x70)4)*10 + (ReadValue&0x0F);ReadValue = Read1302(DS1302_MONTH);Time-Month = (Read

15、Value&0x70)4)*10 + (ReadValue&0x0F);ReadValue = Read1302(DS1302_YEAR);Time-Year = (ReadValue&0x70)4)*10 + (ReadValue&0x0F);void DateToStr(SYSTEMTIME *Time) /将时间年,月,日,星期数据转换成液晶显示字符串,放到数组里DateString if(hide_year2) /这里的if,else语句都是判断位闪烁,2就不显示,输出字符串为 2007/07/22 Time-DateString0 = 2; Time-DateString1 = 0;

16、 Time-DateString2 = Time-Year/10 + 0; Time-DateString3 = Time-Year%10 + 0; else Time-DateString0 = ; Time-DateString1 = ; Time-DateString2 = ; Time-DateString3 = ;Time-DateString4 = /;if(hide_monthDateString5 = Time-Month/10 + 0; Time-DateString6 = Time-Month%10 + 0; else Time-DateString5 = ; Time-D

17、ateString6 = ; Time-DateString7 = /;if(hide_dayDateString8 = Time-Day/10 + 0; Time-DateString9 = Time-Day%10 + 0; else Time-DateString8 = ; Time-DateString9 = ; if(hide_weekWeek%10 + 0; /星期的数据另外放到 week_value数组里,跟年,月,日的分开存放,因为等一下要在最后显示 else week_value0 = ; week_value1 = 0;Time-DateString10 = 0; /字符串末

18、尾加 0 ,判断结束字符void TimeToStr(SYSTEMTIME *Time) /将时,分,秒数据转换成液晶显示字符放到数组 TimeString; if(hide_hourTimeString0 = Time-Hour/10 + 0; Time-TimeString1 = Time-Hour%10 + 0; else Time-TimeString0 = ; Time-TimeString1 = ;Time-TimeString2 = :; if(hide_minTimeString3 = Time-Minute/10 + 0; Time-TimeString4 = Time-Mi

19、nute%10 + 0; else Time-TimeString3 = ; Time-TimeString4 = ; Time-TimeString5 = :; if(hide_secTimeString6 = Time-Second/10 + 0; Time-TimeString7 = Time-Second%10 + 0; else Time-TimeString6 = ; Time-TimeString7 = ; Time-DateString8 = 0;void Initial_DS1302(void) /时钟芯片初始化unsigned char Second=Read1302(DS

20、1302_SECOND);if(Second&0x80) /判断时钟芯片是否关闭 Write1302(0x8e,0x00); /写入允许Write1302(0x8c,0x07); /以下写入初始化时间 日期:07/07/25.星期: 3. 时间: 23:59:55Write1302(0x88,0x07);Write1302(0x86,0x25);Write1302(0x8a,0x07);Write1302(0x84,0x23);Write1302(0x82,0x59);Write1302(0x80,0x55);Write1302(0x8e,0x80); /禁止写入/*ds18b20子程序*/*

21、ds18b20延迟子函数（晶振12MHz ）*/void delay_18B20(unsigned int i)while(i-);/*ds18b20初始化函数*/void Init_DS18B20(void) unsigned char x=0; DQ = 1; /DQ复位 delay_18B20(8); /稍做延时 DQ = 0; /单片机将DQ拉低 delay_18B20(80); /精确延时 大于 480us DQ = 1; /拉高总线 delay_18B20(14); x=DQ; /稍做延时后 如果x=0则初始化成功 x=1则初始化失败 delay_18B20(20);/*ds18b

22、20读一个字节*/unsigned char ReadOneChar(void)uchar i=0;uchar dat = 0;for (i=8;i0;i-) DQ = 0; / 给脉冲信号 dat=1; DQ = 1; / 给脉冲信号 if(DQ) dat|=0x80; delay_18B20(4); return(dat);/*ds18b20写一个字节*/void WriteOneChar(uchar dat)unsigned char i=0;for (i=8; i0; i-) DQ = 0;DQ = dat&0x01; delay_18B20(5);DQ = 1; dat=1;/*读取

23、ds18b20当前温度*/void ReadTemp(void)unsigned char a=0;unsigned char b=0;unsigned char t=0;Init_DS18B20();WriteOneChar(0xCC); / 跳过读序号列号的操作WriteOneChar(0x44); / 启动温度转换delay_18B20(100); / this message is wery importantInit_DS18B20();WriteOneChar(0xCC); /跳过读序号列号的操作WriteOneChar(0xBE); /读取温度寄存器等（共可读9个寄存器） 前两个就是温度delay_18B20(100);a=ReadOneChar(); /读取温度值低位b=ReadOneChar(); /读取温度值高位temp_value=b4;void temp_to_str() /温度数据转换成液晶字符显示 TempBuff