文献检索综合报告.docx

1、文献检索综合报告文献检索综合报告综 合 检 索 报 告姓名 _ 班级 _ 学号 _检索课题（中文） _光纤传感器及其应用_ （英文）_ optical fiber sensor and its application_一、检索策略1、检索词：主题词（中文）:光纤传感（英文）: optical fiber sensor 相关词：（中文）_ 光纤_ （英文）_ optical fiber_副主题词：（中文）_应用_（英文）_application_2、构造检索式（布尔逻辑表达式或网络检索式）光纤传感and应用二、检索来源（本文所查数据库名或其它来源）万方 Springer OhioLINK三、检索

2、结果：分别写出篇名、作者、文献来源（期刊指刊名、年、卷期；专利指专利号；学位论文指授予单位，标准指标准号等文摘形式）及摘要（有原文请注明），所有数据库均检索近6年的文献。1、中文期刊（找5篇）：（必备） 篇名：基于布里渊散射的分布式光纤传感系统的应用作者：李星蓉 李永倩文献来源：电力系统通信 2009,30(12)摘要：介绍了分布式光纤传感的基本原理,对布里渊光强与温度和应变之间的关系进行了仿真,设计了基于自发布里渊散射的光纤传感系统,对G.652光纤进行了加热和受拉力状态下的试验,并对采集的信号进行了分析,验证了光强度与温度和拉力的关系;探讨了分布式光纤传感系统的应用前景. 篇名：裂缝光纤传

3、感的工程应用作者：吴永红 蔡海文 刘浩吾 吴中如文献来源：光电子激光 2007,18(12)摘要：光纤传感的灵敏性及工程存活率是其工程实用化的两个关键技术参量,对光纤混凝土结构两种常用裂缝光纤传感光信号对裂缝宽度的灵敏性与存活率进行了实验研究,对光纤涂覆层对灵敏性影响的大小和机理进行了分析,并制作了灵敏性与存活率均较高的光纤试验样本,与裂缝成45夹角时,相比于等直径的普通二次涂覆粗光纤(10/125/900m),样本的灵敏性提高近65%,而存活率亦高出约15%.研究结果可为裂缝光纤传感的优化设计和工程应用提供了基本参照. 篇名：光纤传感测量系统在超导转子旋转装置中的应用作者：胡新宁 王秋良 崔

4、春艳 韩立 鞠昱 王欣 谢亮文献来源：光学精密工程 2008,16(11)摘要：介绍了超导转子旋转驱动原理以及应用在超导转子旋转装置中的一种光纤传感测量系统.光纤传感测量系统包括微位移光纤传感器、转速光纤传感器、电机控制光纤传感器和信号读取图形,该系统能够进行转子悬浮微位移和旋转速度的测量并提供转子旋转所需的控制信号.在4.2 K低温下进行了转子悬浮和旋转实验,超导球形转子悬浮微仪移测量分辨率为10m,转子转速达到了1 365 r/min.实验结果为进一步应用光纤传感测量系统精确监控超导转子工作姿态提供了参考. 篇名：光纤传感网络在边坡稳定监测中的应用研究作者：丁勇 施斌 崔何亮 索文斌 刘杰

5、文献来源：岩土工程学报 2005,27(3)摘要：本文设计了一种新型的光纤传感网络.该网络利用分布式光纤应变监测技术(BOTDR),将光纤(光缆)按一定方式布设成网络,埋入边坡表面以下一定位置,通过监测光纤(光缆)的应变变化,推算出边坡的表面变形.对室内模型进行的加载实验表明,该网络对悬挂重物而引起的表面变形很敏感,且能够精确分析发生异常的区域和应变大小,进而对表面变形状态进行三维模拟. 篇名：分布式光纤传感技术及其应用作者：刘德明 孙琪真文献来源：激光与光电子学进展 2009,46(11)摘要：分布式光纤传感技术是近年来光纤传感领域的研究热点.介绍了该领域的研究成果,包括基于光纤后向散射光时

6、域及频域反射技术、基于光纤瑞利散射偏振光时域反射、基于长距离光干涉技术的分布式光纤传感以及基于非同和全同光纤布拉格光栅复用的准分布式光纤传感技术;论述了分布式光纤传感系统的工作原理、特点及性能;介绍了其在民用工程结构、航空航天、船舶工业、电力工业、石油化工业和医学等各个领域中的应用.2、外文期刊（找5篇）：（必备） 1) 篇名：Technology of fiber-optic temperature sensing and its application in temperature measuring of gob area 作者：Jing-wen Liu and Li-ming Huan

7、g文献来源：Journal of Coal Science and Engineering Volume 17, Number 2 (2011)Abstract： Based on advantages of technology of distributive fiber-optic temperature sensing and specific to its applications in monitoring mine conflagration, the corresponding Processes such as connection arrangement, signal tr

8、ansmission and monitoring were illustrated. As applied in Sitai Coal Mine of Datong Coal Mine Group Co., this method is effective and accurate and could provide reliable gist for monitoring spontaneous combustion in gob area of mines. 2) 篇名：optical fiber sensing system and its applications作者：Yuliang

9、 Liu, Wentao Zhang, Tuanwei Xu, Jun He, Faxiang Zhang and Fang Li文献来源：Photonic Sensors Volume 1, Number 1 （2011）Abstract ：An overview of fiber laser sensing is presented. The design and the characteristics of distributed feedback (DFB) fiber lasers for high performance sensing applications are descr

10、ibed. Demodulation techniques based on unbalanced fiber interferometer are discussed, especially for the noise level, the dynamic range, and the crosstalk in dense-wavelength-division multiplexing. Finally, the fiber laser sensing system configurations and field demonstrations for different applicat

11、ions are illustrated. 3) 篇名：Evaluation of fiber optic sensors for remote health monitoring of bridge structures作者：Ebrahim Mehrani, Ashraf Ayoub and Amir Ayoub文献来源：Materials and Structures Volume 42, Number 2 (2009)Abstract： Health monitoring of civil infrastructure systems has recently emerged as a

12、powerful tool for condition assessment of structural performance. With the widespread use of modern telecommunication technologies, structures could be monitored periodically from a central station located several miles away from the field. Sensors are placed at several critical locations along the

13、structure, and send structural information to the central station. This remote capability allows immediate damage detection, so that necessary actions that ensure public safety are taken. The goal of this research work is to evaluate the use of Fiber Optic sensing technology as a tool for structural

14、 health monitoring. To perform this task, a case study involving installation of Fiber Optic Sensors on a selected bridge structure during its construction phase was conducted. The bridge is located in the state of Florida, USA and is considered the first smart structure in this state. Static and Dy

15、namic testing of the bridge were performed using loaded SU4 trucks. A 3-dimensional analytical finite element model of the bridge was developed and its results were compared to the test data. The study confirmed the accuracy of the sensors in estimating the bridge behavior under heavy truck loads. I

16、n addition, the sensors were connected to a data acquisition system permanently installed on-site. The acquisition system could be accessed through remote communication, which permits the evaluation of the bridge behavior under live traffic loads. Currently, live structural data under traffic loadin

17、g is being transmitted continuously to the central maintenance office. The study revealed that the proposed health monitoring technology will enable practical, cost-effective, and reliable maintenance of bridge structures. 4) 篇名：Measurements of radiation vibrations of turbomachine blades using an op

18、tical-fiber displacement-sensing system作者：Tong Qing-bin, Ma Hui-ping, Liu Li-hua, Zhang Xiao-dong and Li Gui-bin文献来源：Journal of Russian Laser Research Volume 32, Number 3 (2011)Abstract： Turbomachine blades are critical equipment in the energy, chemical, aviation, and shipbuilding industries. Turbom

19、achine-blade vibrations can cause high cycle fatigue, which reduces the blade lifetime. Their stable operation is a determining factor of safe and efficient production. In order to monitor and detect the turbomachine-blade vibrations and check whether whole or partial performance is normally operati

20、ng, we design a reflective intensity-modulated optical-fiber sensing system for radial vibration detection of turbomachine blades and introduce the basic principles of the detection system in detail. We study some key technologies such as the control system of the laser-diode (LD) constant power and

21、 an optical-fiber coupling system with the optical-fiber-bundle structure. We analyze the sensor output characteristics and present some numerical simulations. In view of our experimental results, we show that the system elaborated can eliminate the effects caused by light-intensity fluctuations, op

22、tical-fiber flexural losses, and changes in the surface reflection coefficient, and can detect the radial vibrations of turbomachine blades in the presence of strong electromagnetic interference and under high temperatures. 5) 篇名：Distributed measurements of structures by fiber optic sensors作者：II-Bum

23、 Kwon文献来源：KSCE Journal of Civil Engineering Volume 7, Number 6 (2003)Abstract： Continuous monitoring of civil structures is very useful to evaluate the structural health status. Fiber optic sensors can give the sensing solution for conducting continuous monitoring because these sensors are going to

24、be multiplexed with various sensors on one line of an optical fiber and have the durability to harsh environments, and also are not affected by electromagnetic effects. In this study, we studied on the development of two kinds of sensors: One is an optical loss based fiber optic sensor which could b

25、e multiplexed by optical time domain reflectometry, and another is a fiber optic BOTDA (Brillouin optical time domain analysis) sensor for distributed temperature measurement. To measure the strain by optical loss based fiber optic OTDR (optical time domain reflectometry) sensor, the optical loss of

26、 an optical fiber was designed to be sensitive to the strain. By performing beam deflection test, the strains of the beam was measured by these sensors, and compared with the strains of electrical strain gages at the same location. From the results, we could confirm these sensors had a good sensitiv

27、ity to monitor the large civil structures. In order to measure the distributed temperature, A fiber optic BOTDA sensor system, which has a capability of measuring the temperature distribution, attempted over several kilometers of long fiber paths. This simple fiber optic sensor system employs a lase

28、r diode and two electro-optic modulators. The optical fiber of the length of 1400 m was installed on the surfaces of the building. The change of the distributed temperature on the building construction was well measured by this fiber optic sensor. The temperature changed normally up to 4C through on

29、e day. Also, The temperature distribution of spring season was compared with that of early winter season. 3、专利文献（中外文各找2篇）：（工科必备） 篇名：一种透过固体进行声音振动测量的光纤传感装置发明（设计）人：肖文,许秉时,李瑞,姚东专利号：CN200910242527.4摘要：本发明公开了一种透过固体进行声音振动测量的光纤传感装置，该光纤传感装置由光源(1)、发射光纤(2)、光纤传感单元(3)、接收光纤(4)、振动耦合单元(5)和光电探测器(61)和信号处理电路(6)组成；其中，光

30、纤传感单元(3)和振动耦合单元(5)构成探测传感模块；发射光纤(2)安装在光源(1)与光纤传感单元(3)之间，接收光纤(4)安装在光电探测器(61)与光纤传感单元(3)之间，光电探测器(61)输出电信号给信号处理电路(6)，振动耦合单元(5)与固体介质(7)接触。在本发明中，选取强度调制型光纤振动传感器作为声-光换能单元，克服了传统压电换能单元抗电磁干扰性差、特殊环境下存在危险的问题。本发明具有结构精巧，灵敏度高，易于使用的优点。 篇名：一种分布式弯曲光纤传感装置发明（设计）人：杜兵,杜蔚,杜迎涛专利号：CN200910024251.2摘要：本发明公开了一种分布式弯曲光纤传感装置，光时域反射计

31、、光分路器、弯曲光纤传感器，其特征在于，光时域反射计接光分路器，分路器接至少两根及两根以上的光纤，每根光纤上至少有一个弯曲光纤传感器，形成一个光纤传感装置。当该光纤传感装置上的任一个光传感器件有响应时，并且该响应与时间相关，从而可换算出位置，光时域反射计上反应出来，从而完成较大范围力值得监测。本发明结构简单实用，抗环境干扰能力强，运行及使用成本低，适合于推广和使用。 篇名：Optical fiber shape sensing systemsInventors: Younge; Robert G. (Portola Valley, CA), Ramamurthy; Bhaskar S. (Lo

32、s Altos, CA), Tanner; Neal (Palo Alto, CA), Schlesinger; Randall L. (San Mateo, CA), Udd; Eric (Fairview, OR)United States Patent：8,050,523Abstract：A medical instrument system includes an elongate flexible instrument body with an optical fiber substantially encapsulated in a wall of the instrument body, the optical fiber including one or more fiber gratings. A detector is operatively coupled to the optical fiber and configured to detect respective light signals reflected by the one or