船检句子及术语.docx

1、船检句子及术语船检业务用英语1、船体56分段完工后结构完整性和焊缝检查Inspection structure integrity and welding seam on completing No.56 block.上层建筑完后结构完整性检查Inspection structure integrity after completing the superstructure.No.8 与No9分段合拢后大接头装配精确性和结构完整性检查Checking the joint accuracy and structure integrity between No.8 and No.9 block a

2、fter closed.上层建筑合拢后结构完整性检查Checking structure integrity of superstructure(deckhouse)after closed.货舱口围板船上安装精度检查Inspecting fitting accuracy of hatch coaming on berth.货舱口围板焊接后焊缝检查Inspecting welding seam of hatch coaming after welding.No1压载水舱（No.15分段）气压试验（压头试验）检查Inspection air pressure test(with water he

3、ad) for No1. ballast water tank(No15 block).上甲板冲水试验检查Inspection hosing test for upper deck.下水前测量船体主尺度、总长、两柱间长、型宽、型深、基线挠度Measuring hulls main dimensions: length overall(LOA.),length between perpendiculars(LPP.),breath molded(B. mld.),depth molded and deflection before launching.划线后检查吃水标尺至平板龙骨之间的距离Ins

4、pection distance between draught marks and keel plate after marking out.吃水标志（载重线标志）安装后精确性检查Inspecting fitting accuracy of draught mark(load line mark).载重线标志划线后检查尺度Inspection dimension of load line after marking out.舵叶完工后检查Checking rudder after completing(finished).货舱舱口盖焊缝和尺度检查Inspection welding seam

5、 and dimension of cargo hatch cover.2、轮机内场螺旋桨轴（中间轴）机加工尺寸检查Inspection machining dimension of propeller shaft(intermediate shaft or counter shaft).检查螺旋桨轴与螺旋桨锥度接触面Check for surface contact area(metallic contact) between stern shaft and propeller hub tapers.舵杆机加工尺寸检查Inspection machining dimension of rud

6、der stock.上舵承组装后检查Inspection rudder carrier after assembly.舵销机加工尺寸检查Inspection machining dimension of rudder pintle.舵杆、舵叶、舵销连接后中心线检查Inspecting alignment of stock, rudder blade and pintle.锚投掷试验和拉力试验Lowering test and tension test of anchor.轴系连接螺栓和孔尺寸测量Measuring dimension of coupling bolts and reamer h

7、ole.3、轮机外场安装（钳工）防蚀板布置正确性检查Inspection arrangement correctness of aluminium Anodes.船名牌（烟囱标志）安装正确性检查Inspection installation correctness of ships name plate(funnel mark).水密小舱口盖（水密门、窗）启闭灵活性检查Flexibility and hosing test for small water tight hatch cover(water tight door and window).货舱舱口盖密性试验（启闭试验、应急启闭试验）T

8、ightness test(opening and closing test,emergency opening and closing test)for cargo hatch cover.弃锚装置检查Inspecting anchor throwing away appliance.轴、舵系镗孔前中心线定位检查Inspecting centerline positioning for shaft system and rudder system before boring.轴系镗孔后光学校中检查Optical aligned check for shaft system after bor

9、ing.艉轴管滑油液压试验Hydraulic test for L.O. pipe for stern tube.艉轴管前、后轴承与衬套直径测量Measuring diameter of fore and aft stern tube bearing and bushes.艉轴管前、后衬套压入检查Inspection push-up load for fore and aft stern tube bushes.螺旋桨轴与轴承间隙测量Measuring clearance between propeller shaft & bearing.螺旋桨压入检查Inspection wet fitti

10、ng the propeller.艉轴密性装置的安装与密性试验Fitting and tightness testing of propeller shaft before launching(after sea trial).艉轴管滑油系统的投油清洗Flushing L.O. system of stern tube.舵叶0位检查Inspecting zero(datum) position of rudder blade.舵装置完整性与轻便性检查Inspecting integrity and flexibility of rudder appliance.舵止跳块的间隙测量Measuri

11、ng clearance of rudder jumping stopper.操舵装置完整性检查Inspecting integrity of steering gear.舵轴承安装间隙测量Measuring installation clearance of rudder bearing.舵机管路系统的投油清洗Flushing of piping system for steering gear.舵机系泊试验Mooring test of steering gear.舵机航行中操舵试验Manoeuving test of steering gear during sea trial.舵机应急

12、操舵试验Emergency manoeuving test of steering gear.锚机管路系统的投油清洗Flushing of piping system for windlass.锚机安装与校中检查Installation and alignment inspection of windlass.锚机系泊试验Mooring test of windlass.锚机航行中抛起锚试验Anchoring and weighting test of windlass on sea trial.绞缆机完整性检查Inspection integrity of mooring winch.绞缆机

13、管路系统的投油清洗Flushing of piping system for mooring winch.绞缆机系泊试验Mooring test of mooring winch.舵机（锚机、绞缆机）液压系统安全装置调整Adjusting safety device for hydraulic system of steering gear(windlass、mooring winch).4吨食物吊运转试验和吊重试验Running test and hoisting test for 4t provision crane.救生艇收放试验Lowering and hoisting test fo

14、r life boat.救生艇航行试验Sea trial for life boat.舷梯（引水员梯）压重试验Loading test of accommodation ladder(pilot ladder).舷梯（引水员梯）和绞车收放试验Lowering and hoisting test of accommodation ladder(pilot ladder).货舱舱口盖启闭试验Opening and closing test for cargo hatch cover.货舱舱口盖应急启闭试验Emergency opening and closing test for cargo ha

15、tch cover.水密小舱口盖（水密门、窗）启闭灵活性检查和冲水试验Flexibility and hosing test for small water tight hatch cover(water tight door and window).主机垫片检查Checking liner of main engine(M.E.).主机贯穿螺栓紧固度检查Tightening inspection for through bolts of main engine(M.E.).下水后主机曲轴和中间轴连接后校中Aligning main engines crank shaft and interm

16、ediate shaft after launching.下水后中间轴和螺旋桨连接后校中Aligning intermediate shaft and propeller shaft after launching.主机动车前（航行试验后）曲轴甩档测量Measuring deflection of crank shaft of M.E. before starting up(after sea trial).主机滑油（燃油）管路投油清洗Flushing lubrication oil(fuel oil) system of M/E.轴带发电机及齿轮箱安装检查Alignment inspecti

17、on installation of shaft generator and gear box.主机报警和安全装置试验Alarm testing and safety device testing of M/E.主机系泊（航行）试验并检查其附属泵与管路Mooring test(sea trial) of M.E.and inspection attached pumps and piping system.轴带发电机运转试验及主机与轴带发电机之间的离合器的效用试验Running test of shaft generator and clutching test between M.E. an

18、d shaft generator.航行试验中轴带发电机与柴油发电机之间的换车试验Change over test between shaft generator and diesel generator on sea trial.主机航行试验后的拆检Overhauling main engine after sea trial.主柴油发电机组安装检查Installation inspection of main diesel generator.主柴油发电机动车前（系泊试验后）曲轴甩档测量Measuring deflection of crank shaft of main diesel g

19、enerator before running test(after sea trial).主柴油发电机的报警和安全装置试验Alarm and safety device testing of main diesel generator.主柴油发电机运转试验Running test of main diesel generator.应急柴油发电机运转试验Running test of emergencymain diesel generator.应急柴油发电机的安全装置试验Safety device testing for emergency diesel generator.主（辅）空气压缩

20、机的充气试验、安全阀和自动装置的调整Charging test and safety valve and automatic device adjusting for main compressor(auxiliary compressor).应急空气压缩机的运转试验、安全阀和安全装置的调整Running test and safety valve and safety device adjusting for emergency compressor.主空气瓶（控制空气瓶、汽笛空气瓶）装船后气密试验和安全阀的调整Air tightness test and safety valve adju

21、sting for main air receiver (control air receiver, air horn receiver)on board.辅锅炉（废气锅炉）装船后气密试验Air tightness test for auxiliary boiler (economize boiler) on board.辅锅炉安全阀检验及蓄压试验Safety valve adjusting and accumulating test for auxiliary boiler.辅锅炉自动控制装置试验Automatic controller test for auxiliary boiler.废

22、气锅炉效用试验Function test for economizer.压载泵效用试验和自动控制装置试验Function test and automatic controller test for ballast pump.舱底水油水分离器（污水处理装置、制淡装置、焚烧炉）效用试验Function test of bilge oily water separator (sewage treatment plant, fresh water generator, incinerator).机舱行车吊重试验Hoisting test of engine room crane.机修间设备运转试验R

23、unning test of machines in repair room.敷板前驾驶室检查主干电缆安装Inspection main cable installation for wheel house before paneling decoration.总配电板（应急配电板）绝缘电阻测量和保护装置可靠性试验Measuring insulation resistance and reliability test protection device for main switchboard(emergency switchboard).主发电机（应急发电机）负荷及特性试验Load and

24、performance test for main generator (emergency generator).主发电机（应急发电机）电压、频率自动调节试验Automatic governing test of voltage and frequency for main generator (emergency generator).主发电机并联运行试验Parallel-running test for main generator.柴油发电机电压特性试验Diesel generator voltage characteristic test.柴油发电机调速特性试验Diesel gene

25、rator governor sensitivity test.突加负荷试验Test for taking on a full load suddenly.逆功率脱扣试验Reverse power relay trip test.过电流脱扣试验Over-current relay test.低压脱扣试验Under voltage tripping test.联锁试验Interlocking reliability test.二台主发电机负荷转移试验Testing load charge-over between two main generator.轴带发电机负荷试验和航行时效用试验Load

26、test for shaft generator and its function test on sea trial.应急发电机自动供电试验Automatic supply test of emergency generator.舵角指示器校准Calibrating tudder angle indicator.舵角电动机遥控起动和报警试验Remote starting and alarm test for steering gear motor.自动舵效用试验Function test automatic pilot.锚机（舵机）电动机运转试验Running test of motor f

27、or windless (steering gear).辅机和泵的电动机程序起动和自动转换Sequence starting and automatic exchange of motors for auxiliary machine and pump.蓄电池和充电装置的充放电试验Charge and discharge operation test for battery and charge equipment.机舱风、油（舱底泵）应急切断装置操作试验Operation test of emergency switching-off device for oil pump and vent

28、ilator (bilge pump) in engine room.消防泵、应急消防泵遥控装置操作试验Operation test of remote control device for fire pump and emergency fire pump.雾笛效用试验Function test of fog horn.测深仪的换能器船台安装和水密性检查Inspection installation and water tight transducer of echo sounder on berth.测深仪效用试验Function test of echo sounder.计程仪水下部分船

29、台安装和水密性检查Inspection installation and water tight for logs underwater parts on berth.航行试验中计程仪效用试验及误差调整Function test and adjust error for log on sea trial.测向仪环状天线船台安装检查Inspection installation for loop antenna of direction finder on berth.航行试验中测向仪效用试验及自差曲线校正Function test and calibration self-heterodyne

30、 curve for direction finder on sea trial.组装报务台天线安装检查和绝缘测量Inspection installation for antenna of radio console and measuring its insulation resistance.发讯机调谐表制表Scheduling tuning chart of transmitter.航行试验中组装报务台效用试验Function test of radio console on sea trial.航行试验中电罗经固定误差校正和效用试验Calibration constant error

31、 and function for gyro compass on sea trial.航行试验（系泊试验）中雷达效用试验Function test of radar on sea trial (mooring test).传感器报警设定值模拟试验Simulating alarm test for fire detector.火警检测器自动报警试验Automatic alarming test for fire detector.下列项目按系泊试验大纲进行系泊试验The items are tested according to mooring test program as following as:轮机员呼叫装置试验Function test of engineer calling device.病室呼叫装置试验Function test of calling device in hospital.超短波对讲机Function test of ultra-short wave radio telephone