毛巾折叠机说明书v01.docx

1、毛巾折叠机说明书v01 毛巾折叠机说明书 泰州市苏星洗涤印染机械制造有限公司 TAIZHOU SUXING WASHING-PRINTINGDYEING MACHINE Co.,LTDTABLE OF CONTAINS / 目录Chapter章节PRODUCT DESCRIPTION I产品描述 IDescription of the product and its use, technical data, warranty and service instructions, and if necessary declaration of conformity 描述产品及其使用目的、技术数据、

2、产品质保及维修须知，如有必要，还可描述产品的符合性声明。 SAFETY PRECAUTIONS II安全注意事项 IIInformation on important safety precautions including instructions for the operating personnel 描述相关的重要安全注意事项，包括操作人员的安全操作须知。 OPERATION III操作 IIIInformation on the correct use of the machine 描述如何正确使用本机器。 DISPLAY MENUIV显示界面 IVInstructions on di

3、splay of the machine 描述设备运转各界面功能。 PARAMETER SETTINGV参数设定VDescription the functions of the parameters 描述机器的各项参数功能。MACHINE FUNCTION AND TROUBLE-SHOOTINGVI机器功能和故障排除VIDescription of machine functions and trouble-shooting描述机器的各项功能及故障处理方法。 SPARE PARTS VII备件 VIIProcedure for ordering spare parts and spare

4、parts list 订购备件的程序及备件清单 MACHINE DOCUMENTS can contain: Wiring diagrams Pneumatic diagrams Piping and instrument diagrams PLC documentation Program disc Factory setting Technical description VIII文档资料 可包含： 布线图 气动图纸 配管和仪表布置图 PLC程序说明书 程序光盘 工厂设置说明书 技术说明书VIII CHAPTER I / 第一章 PRODUCT DESCRIPTION/产品描述 Inten

5、ded use / 用途 Intended use / 用途 The Butterfly folding machine is used for the folding, stacking and conveying of flatwork and sheets. 蝶式折叠机可对平面织物与床单进行折叠、堆码、运输。 WARNING The machine must only be used according to its intended purpose. The intended use also includes observing the conditions and requirem

6、ents prescribed by the manufactu-rer for installation, operation and mainte-nance. 警告 本机器应按其预期用途来使用。本机器的预期用途还应遵守制造商规定的有关安装、操作和维护方面的条件与要求。 WARNING The machine must only be operated by instructed operating personnel. Please read hereto paragraph Target Groups in this chapter. 警告 只有接受过培训的操作人员才能操作本机器。请阅

7、读本章节中有关“目标群”的内容。 WARNING 警告 Any other use of the machine may involve risks to persons and must therefore only take place after previously obtained written approval from the manufacturer. 本机器的任何其它预期用途都有可能导致人员伤亡的危险，因此必须事先获得制造商的书面许可之后方可用于其它用途。 Equipment and components on the machine, which are importan

8、t to safety and health, have been con-structed in preparation for an expected life of 15,000 operating hours - however max. 10 years from the time of manufacture. 本机器上的装置和零部件对于人员安全和健康而言是至关重要的，其结构制造应符合本机器15000工作小时的使用寿命要求而且其寿命自生产之日起最长应达10年。 WARNING 警告 The correct function of such equipment and compone

9、nts within this period implies that the prescribed maintenance is carried out, see information regarding this in chapter VII. 必须按规定对该设备及部件进行维护，方可确保其在使用寿命周期内正常工作。相关信息，请参见第七章的有关内容。 The normal, permanent working places of the operating personnel (operator) have been marked on the layout, see paragraph

10、1.4. 平面布置图上已标记上操作人员（操作员）正常永久的工作位置，参见第1.4节。 WARNING 警告 It may involve risk to the operator to work on, under or between this and other machines. Work Stay in these areas is only allowed for authorized personnel, and only when the machine has been stopped and the main switch has been locked in positio

11、n 0. 操作人员站在本机器下方或者站在本机器和其它机器之间进行操作均有可能危及到操作人员的人身安全。因此这些区域内的工作站台（Work Stay）只允许经授权的人员才能使用，并且只有当机器已停机，电源开关已锁定在位置“0”后方可踏入工作站台。 IMPORTANT 重要事项 This manual is part of the delivered machine volume and is to be handed over to the new owner if the machine is sold. 本手册作为随机附送的机器使用说明书的一部分，在本机器售出时，应将本手册随机交付给新的机主

12、。 If any doubt should occur about the contents in the manuals, it will always be the English text which is valid. 如果本手册中的内容出现任何冲突和不确定情况，始终应以英文文本为标准。 CHAPTER I / 第一章 PRODUCT DESCRIPTION/产品描述 DESCRIPTION OF STRUCURAL COMPONENTS / 结构图 Description of structural components / 结构部件的描述 1 Feeding station 1 进

13、料台 2 Lateral fold 2 横折 3 Crossfold 3 纵折 4 Stacker 4 码堆装置 5 Discharge conveyor 5 出料输送机 6 Discharge conveyor 6 出料输送机 7 Operating panel 7 操作面板 CHAPTER I / 第一章 PRODUCT DESCRIPTION/产品描述 TECHNICAL DATA / 技术参数 Electric connection / 电气连接Mains voltageMains currentPower consumptionControl voltageMains frequen

14、cy (according to order)3 x 400/415 V -5 +5%3 x 230 V -5 +5%4.2A / 3 x 400/415 V7.3A / 3 x 230 V2.3kW / 2.9kVA24 V DC50Hz / 60Hz电压电流耗电控制电压频率 Pneumatic connection / 气动连接 Air connection Min. air pressure Max. air pressure Air consumption ND 3/8 6 bar / 87 psi 7 bar / 102 psi13 m / h 空气连接 最小气压 最大气压 耗气 S

15、hipping dimensions / 运输尺寸 Length Width Height 4.75 m 2.00 m 1.50 m 长 宽 高 Weight / 重量 Net weight Point load 1150 kg 287.5 kg 净重 点载荷 Ambient conditions / 环境条件 Permitted max. ambient temperature Permitted max. relative moisture + 40 C 85 % 允许的最大环境温度 允许的最大相对湿度 CHAPTER I / 第一章 PRODUCT DESCRIPTION/产品描述 TE

16、CHNICAL DATA / 技术参数 CHAPTER I / 第一章 PRODUCT DESCRIPTION/产品描述 TECHNICAL DATA / 技术参数 Folding applications 应用 Fully automatic folding and stacking of flatwork while sorting automatic. 平面织物的全自动分拣折叠和码堆. Folding performance 折叠性能 Cycle time 3 - 4 s Performance 900 - 1200 pcs / h 循环时间 3 - 4 s 能力：900 - 1200

17、Stk / h Maximal end measures 600 mm x 600 mm 折叠后最大尺寸 600 mm x 600 mm Folding possibilities lateral folds 横折的几种方式 Mechanically adjustable 140 mm - 380 mm 机械的调节 140 mm - 380 mm Bypass Half fold Third fold 旁通 对折 1/3折 Folding possibilities crossfolds 纵折的几种方式 The minimal piece length is 400 mm 布草最小长度 400

18、 mm Up to a maximal piece length of 2000 mm 最大长度可达 2000 mm: Bypass Half fold 旁通 对折 Third fold inside S-fold Third fold 内1/3折叠 S折叠 2 half folds Fix measure 2个内折叠 固定尺寸内折叠inside flod side CHAPTER I / 第一章 PRODUCT DESCRIPTION/产品描述 WARRANTY AND SERVICE INSTRUCTIONS / 保用期及维修须知 1.6 Warranty and service inst

19、ructions 1.6 产品质保和维修须知 The manufacturer undertakes to replace defective parts resulting from faulty design, materials or workmanship for a period not exceeding 12 months from contractual delivery time, or max. 2,500 operating hours. The warranty is only valid if the product is correctly installed an

20、d maintained in accordance with the manufacturers instruction and common practice. No warranty claim can be made as a result of inappropriate operation, improper use, and use of force. 制造商负责更换因设计缺陷、材料或工艺问题而引起的缺陷部件，更换期限自合同交货之日起不得超过12个月，或者最长2500个工作小时。如果本产品按照制造商规定的使用说明及通行的操作惯例来正确安装和维护，则产品质保有效。若因操作不正确、使

21、用不当及用力过猛而导致的任何损坏，则不在保修范围内。 The manufacturers warranty does not include da-mage that is due to insufficient maintenance, changes or repair made without the written consent of the manufacturer, normal wear or defects due to war, strike, lockout, and other force majeure or political conditions, which t

22、he manufacturer cannot control. The same applies to damage to products, which are not supplied by the manufacturer or a construction ordered by the buyer. 制造商的质保不包括因维护不足、事先未经制造商书面同意而进行的变更或维修，以及因制造商无法控制的战争、罢工、停工和其它不可抗拒力或政治条件造成的正常损坏或缺陷。同样的规定还适用于以下情况：凡不是由本机器制造商供应的产品或买主订购的结构件而产生的机器损坏。 Wearing parts such

23、 as transport belts, drive belts or similar are not included in the warranty. 传送带、传动皮带或类似产品等易损件均不在保修范围内。 The manufacturer is not liable for production losses due to machine malfunctions. 因对机器误操作而造成的生产损失，制造商将不承担任何责任。 Faulty parts will be replaced by the manufacturer upon receipt of the faulty compone

24、nts. Transport costs to the manufacturer and back to the buyer, transport insurance and installation costs are for the buyers account. 制造商收到有故障的零部件后应更换这些故障部件。寄送至制造商以及返寄回买主的运输费用、运输保险和安装费用应由买主承担。 It is the manufacturers practice to offer the service of its experienced service engineers to supervise th

25、e installation of its equipment, and assist with its starting-up and initial operation. The service engi-neers are not authorised to perform any other duties than the contractual or to incur, waive or modify any obligations or rights on the manufacturers behalf. These conditions also apply to spare

26、parts under warranty supplied by the manufacturer free of charge. The charges and conditions for these services will be supplied on request. 派遣经验丰富的维修工程师，为客户提供监管设备安装、协助客户完成机器启动和初期运行等服务，这是制造商的职责。维修工程师XX不得执行合同规定以外的其它任务，或者以制造商的名义订立、放弃或变更任何义务或权利。这些条件也适用于制造商免费提供的处于保修期内的备件。这些维修服务的费用和条件将按要求来执行。 CHAPTER II

27、/ 第二章 SAFETY PRECAUTIONS/安全须知 BASIC SAFETYPRECAUTIONS /基本安全须知 2.1 Basic safety precautions2.1 基本安全注意事项 In order to make this machine as safe as possible, it has been constructed in accordance with the current technical rules and standards for machine safety and by use of technical solutions, which r

28、epresented state of the art at the time of manufacture. 为了尽可能使本机器更为安全，机器结构已按当前的机器安全技术规则和标准，并在制造时采用“最先进的”技术解决方案进行设计制造。 On the machine and its packing, in the OPERATING MANUAL and in the TECHNICAL MANUAL, you will find warnings against non-evident potential risks and against residual risks. 在机器及其包装上，操

29、作手册和技术手册中，您将可找到潜在风险的警告标志和残余风险的警告标志。 WARNING 警告事项 Therefore the machine can only be transported, installed, adjusted, opera-ted, maintained, and dismounted without causing personal injury or involving a health risk, when the instructions in the OPERATING MANUAL, the TECHNICAL MANUAL, and on the machine or its packing are followed. 只有按照操作手册、技术手册以及本机器或其包装上的使用说明运输、安装、调整、操作、维修和拆装本机器才能避免出现人身伤害或健康危险。