单片机外文文献1.docx

1、单片机外文文献1单片机系统广义地说，微处理系统是用于处理信息的，这种信息可以是电话交谈，仪器读数或企业帐户，但是各种情况下都涉及相同的主要操作：信息处理、存储和传递。在常规的电子设计中，这些操作都是以功能平台方式组合起来的，例如计数器，无论是电子还是机械的，都要存储当前值，并按要求将该值增1。诸如采用计数器的电子钟之类的任一系统要使其存储和处理能力遍布整个系统，因为每个计数器都能存储和处理一些数字。当前微处理化系统与上述的常规方法不同，它将处理，存储和传输三个功能分离形成不同的系统单元。这种形成三个主要单元的分离方法是冯-诺依曼在20世纪40年代所设想出来的，并且是针对微计算机的设想。从此几乎

2、所有制成的计算机都是用这种结构设计的，尽管包含宽广的物理形式，从根本上来说他们均是具有相同的基本设计。在微处理器系统中，处理是由微处理器本身完成的。存储是利用存储器电路，而进入和出自系统的信息传输则是利用特定的输入/输出（I/O）电路。要在一个微处理器化时钟中找出执行计数功能的一个特殊硬件是不可能的，因为时间存储在存储器中，而在固定的时间间隔下由微处理器控制增值。但是，规定系统运转过程的软件包含实现计数器功能的单元。由于系统几乎完全由软件所定义，所以对微处理器结构和其辅助电路这种看起来非常抽象的处理方法使其在应用时非常灵活。这种设计过程主要是软件工程，而且在生产软件时，就会遇到产生于常规工程中

3、相似的构造和维护问题。 图1.1 微型计算机的三个组成部分图1.1显示出了微型计算机中这三个单元是如何按照机器中的信息通信方式而联接起来的。该系统由微处理器控制，它管理自己与存储器和输入/输出单元的信息传输。外部的连接与工程系统的其余部分（即非计算机部分）有关。尽管图中显示的只有一个存储单元，实际中有RAM和ROM两种不同的存储器被使用。由于概念上的计算机存储器更像一个公文柜，上述的“存储器”一词是非常不恰当的；信息存放在一系列已标号的“箱子”中，而且可按问题由“箱子”的序列号进行信息的参考定位。微计算机常使用RAM（随机存取存储器），在RAM中数据可被写入，并且在需要时可被再次读出。这种数据

4、能以任一所希望的次序从存储器中读出，不必按写入时的相同次序，所以有“随机” 存取存储器。另一类型ROM（只读存储器）用来保持不受微处理器影响的固定的信息标本；这些标本在电源切断后不会丢失，并通常用来保存规定微处理器化系统运转过程的程序。ROM可像RAM一样被读取，但与RAM不一样的是不能用来存储可变的信息。有些ROM在制造时将其数据标本放入，而另外的则可通过特殊的设备由用户编程，所以称为可编程ROM。被广泛使用的可编程ROM可利用特殊紫外线灯察除，并被成为EPROM，即可察除可编程只读存储器的缩写。另有新类型的期器件不必用紫外线灯而用电察除，所以称为电可察除可编程只读存储器EEPROM。 微处

5、理器在程序控制下处理数据，并控制流向和来自存储器和输入/输出装置的信息流。有些输入/输出装置是通用型的，而另外一些则是设计来控制如磁盘驱动器的特殊硬件，或控制传给其他计算机的信息传输。大多数类型的I/O装置在某种程度下可编程，允许不同形式的操作，而有些则包含特殊用途微处理器的I/O装置不用主微处理器的直接干预，就可实施非常复杂的操作。 假如应用中不需要太多的程序和数据存储量，微处理器、存储器和输入/输出可全被包含在同一集成电路中。这通常是低成本应用情况，例如用于微波炉和自动洗衣机的控制器。当商品被大量地生产时，这种单一芯片的使用就可节省相当大的成本。当技术进一步发展，更强更强的处理器和更大更大

6、数量的存储器被包含形成单片微型计算机，结果使最终产品的装配成本得以节省。但是在可预见的未来，当需要大量的存储器或输入/输出时，还是有必要继续将许多集成电路相互联结起来，形成微计算机。微计算机的另一主要工程应用是在过程控制中。这是，由于装置是按特定的应用情况由微机编程实现的，对用户来说微计算机的存在通常就更加明显。在过程控制应用中，由于这种设备以较少的数量生产，将整个系统安装在单个芯片上所获取的利益常比不上所涉及的高设计成本。而且，过程控制器通常更为复杂，所以要将他们做成单独的集成电路就更为困难。可采用两种处理，将控制器做成一种通用的微计算机，正像较强版本的业余计算机那样；或者做成“包裹”式系统

7、，按照像电磁继电器那样的较老式的技术进行设计，来取代控制器。对前一种情况，系统可以用常规的编程语言来编程，正如以后要介绍的语言那样；而另一种情况，可采用特殊用途的语言，例如那种使控制器功能按照继电器相互连接的方法进行描述。两种情况下，序均能存于RAM，这让程序能按应用情况变化时进行相应的变化，但是这使得总系统易受掉电影响而工作不正常，除非使用电池保证供电连续性。另一种选择是将程序在ROM中，这样他们就变成电子“硬件”的一部分并常被称为“固件”。尽管大规模集成电路的应用使小型和微型计算机的差别变得“模糊”，更复杂的过程控制器需要小型计算机实现他们的过程。各种类型的产品和过程控制器代表了当今微计算

8、机应用的广泛性，而具体的结构取决于对“产品”一词的解释。实际上，计算机的所有工程和科学上的应用都能指定来进行这些种类的某一或某些工作。而在本设计中压力和压力变送器当某一力加到某一面积上，就形成压力，假如这力是1牛顿均匀地加在1平方米的面积上，这压力被定义为1帕斯卡。压力是一种普遍的工艺状态，它也是这个星球上的一个生活条件：我们生活在向上延伸许多英里的大气海洋的底部。空气物质是有重量的，而且这种下压的重量形成大气压。水，是生活的必需品，也是在压力之下提供给我们中的大多数人。在典型的过程工厂中，压力影响沸点温度、凝固点温度、过程效率、消耗和其他重要因数。压力的测量和控制，或者压力的不足真空，在典型

9、的过程控制中是极为重要的。工厂中的工作仪器通常包括压力计、精密纪录仪、以及气动和电动的压力变送器。压力变送器实现压力测量并产生正比于所传感压力的气动或电信号输出。在过程工厂中，将控制仪表远远放在过程的附近是不现实的，并且大多数测量是不容易从远处传来的。压力测量是一个例外，但是，如果要离测量点几百英尺外指示或记录某种危险化学品的高压，就会有来自这个压力所载的化学品所引发的危险。为了消除这一问题，开发了一种信号传输系统。这种系统常常可是气动或者电动的。使用这种系统，就可以在某一地点安装大多数的指示、记录和控制仪器。这也是最少数量的操作者有效的运行工厂成为现实。当使用气动传送系统时，测量信号就由变送

10、器将比例为0%100%的测量值转换为气动信号。变送器安装在靠近过程中的测量点上。变送器输出对气动变送器是输出压力通过管道传给记录或控制仪表。气动变送器的标准输出范围是20100kPa，这信号几乎在全球使用。当使用电子压力变送器时，压力就被转换成电流或电压形式的电信号。其标准范围对电流来说是420mA DC，对电压信号来说是15V DC。当今，另一种电信号形式变的越来越常用，就是数字或离散信号。基于计算机或微处理器的仪器或控制系统的应用正推动这类信号的应用不断增加。有时，分析获取描述传感器/变送器特性的参数是很重要的。当量程已知，去获取增益就非常简单。假定电子压力传感器的量程为0600kPa，增

11、益定义为输出变化除以输入变化。这里，输出的电信号（420mA DC），而输入的过程压力（0600kPa），这样增益就为：此外我们在本设计中还必须对温度进行测量，温度测量在工业控制中是很重要的，因为它作为系统或产品状态的直接指标，或者作为如反应率、能量流、涡轮机效率和润滑质量等间接指标。现行的温度分度已使用了约200年，最初的仪器是基于气体和液体的热膨胀。现在尽管有许多其他类型的仪器在使用，这些填充式系统仍常用于直接的温度测量。有代表性的温度传感器包括：填充式热系统、玻璃液体温度计、热电偶、电阻温度探测器、热敏电阻、双金属器件、光学和辐射高温计和热敏涂料。电气系统的优点包括高的精度和灵敏度，能实

12、现开关切换或扫描多个测量点，可在测量元件和控制器之间长距离传输，出现事故时可调换元件，快速响应，以及具有测量高温的能力。其中热电偶和电阻温度探测器则被最广泛的使用。来自：中国电子网附：英文原文Microcomputer SystemsElectronic systems are used for handing information in the most general sense; this information may be telephone conversation, instrument read or a companys accounts, but in each case

13、 the same main type of operation are involved: the processing, storage and transmission of information. in conventional electronic design these operations are combined at the function level; for example a counter, whether electronic or mechanical, stores the current and increments it by one as requi

14、red. A system such as an electronic clock which employs counters has its storage and processing capabilities spread throughout the system because each counter is able to store and process numbers. Present day microprocessor based systems depart from this conventional approach by separating the three

15、 functions of processing, storage, and transmission into different section of the system. This partitioning into three main functions was devised by Von Neumann during the 1940s, and was not conceived especially for microcomputers. Almost every computer ever made has been designed with this structur

16、e, and despite the enormous range in their physical forms, they have all been of essentially the same basic design. In a microprocessor based system the processing will be performed in the microprocessor itself. The storage will be by means of memory circuits and the communication of information int

17、o and out of the system will be by means of special input/output(I/O) circuits. It would be impossible to identify a particular piece of hardware which performed the counting in a microprocessor based clock because the time would be stored in the memory and incremented at regular intervals but the m

18、icroprocessor. However, the software which defined the systems behavior would contain sections that performed as counters. The apparently rather abstract approach to the architecture of the microprocessor and its associated circuits allows it to be very flexible in use, since the system is defined a

19、lmost entirely software. The design process is largely one of software engineering, and the similar problems of construction and maintenance which occur in conventional engineering are encountered when producing software. The figure1.1 illustrates how these three sections within a microcomputer are

20、connected in terms of the communication of information within the machine. The system is controlled by the microprocessor which supervises the transfer of information between itself and the memory and input/output sections. The external connections relate to the rest (that is, the non-computer part)

21、 of the engineering system. Fig.1.1 Three Sections of a Typical MicrocomputerAlthough only one storage section has been shown in the diagram, in practice two distinct types of memory RAM and ROM are used. In each case, the word memory is rather inappropriate since a computers memory is more like a f

22、iling cabinet in concept; information is stored in a set of numbered boxes and it is referenced by the serial number of the box in question. Microcomputers use RAM (Random Access Memory) into which data can be written and from which data can be read again when needed. This data can be read back from

23、 the memory in any sequence desired, and not necessarily the same order in which it was written, hence the expression random access memory. Another type of ROM (Read Only Memory) is used to hold fixed patterns of information which cannot be affected by the microprocessor; these patterns are not lost

24、 when power is removed and are normally used to hold the program which defines the behavior of a microprocessor based system. ROMs can be read like RAMs, but unlike RAMs they cannot be used to store variable information. Some ROMs have their data patterns put in during manufacture, while others are

25、programmable by the user by means of special equipment and are called programmable ROMs. The widely used programmable ROMs are erasable by means of special ultraviolet lamps and are referred to as EPROMs, short for Erasable Programmable Read Only Memories. Other new types of device can be erased ele

26、ctrically without the need for ultraviolet light, which are called Electrically Erasable Programmable Read Only Memories, EEPROMs. The microprocessor processes data under the control of the program, controlling the flow of information to and from memory and input/output devices. Some input/output de

27、vices are general-purpose types while others are designed for controlling special hardware such as disc drives or controlling information transmission to other computers. Most types of I/O devices are programmable to some extent, allowing different modes of operation, while some actually contain spe

28、cial-purpose microprocessors to permit quite complex operations to be carried out without directly involving the main microprocessor. The microprocessor processes data under the control of the program, controlling the flow of information to and from memory and input/output devices. Some input/output

29、 devices are general-purpose types while others are designed for controlling special hardware such as disc drives or controlling information transmission to other computers. Most types of I/O devices are programmable to some extent, allowing different modes of operation, while some actually contain

30、special-purpose microprocessors to permit quite complex operations to be carried out without directly involving the main microprocessor. The microprocessor , memory and input/output circuit may all be contained on the same integrated circuit provided that the application does not require too much pr

31、ogram or data storage . This is usually the case in low-cost application such as the controllers used in microwave ovens and automatic washing machines . The use of single package allows considerable cost savings to e made when articles are manufactured in large quantities . As technology develops ,

32、 more and more powerful processors and larger and larger amounts of memory are being incorporated into single chip microcomputers with resulting saving in assembly costs in the final products . For the foreseeable future , however , it will continue to be necessary to interconnect a number of integr

33、ated circuits to make a microcomputer whenever larger amounts of storage or input/output are required.Another major engineering application of microcomputers is in process control. Here the presence of the microcomputer is usually more apparent to the user because provision is normally made for prog