1、H3C路由学习笔记静态路由H3C路由(MSR26-30)1、进入系统视图Startup configuration file does not exist.Performing automatic configuration. Press CTRL_D to break.-按Ctrl + D键终止设备查找自动配置Automatic configuration attempt: 1.Not ready for automatic configuration: no interface available.Waiting for the next.Automatic configuration i
2、s aborted.-按Ctrl + D键后放弃自动配置的尝试Line aux0 is available.Press ENTER to get started.-到这里系统启动完毕,按回车键%Aug 22 09:19:53:318 2014 H3C SHELL/5/SHELL_LOGIN: TTY logged in from aux0.-再按一次回车键 system-viewH3C2、修改路由器名称sysH3Csysname 名称如将默认的路由器名称改为RoNetwork_Dept,Ro表示设备类型为路由器,Network_Dept表示部门名称,以后看到这个名称就知道这是什么设备、在什么位
3、置。建议以后都采用这种方式来给设备命名,以方便管理。H3Csysname RoNetwork_DeptRoNetwork_Dept如果要恢复默认名称,使用undo sysname命令:RoNetwork_Deptundo sysnameH3C3、显示路由表(1)IPv4显示路由表概要信息:RoNetwork_Deptdisplay ip routing-table显示路由表详细信息:RoNetwork_Deptdisplay ip routing-table verbose显示某种路由协议的信息:RoNetwork_Deptdisplay ip routing-table protocol b
4、gp|direct|guard|isis|ospf|rip|static还有其他信息,可使用?显示帮助以便选择:RoNetwork_Deptdisplay ip routing-table ?(2)IPv6只需将IPv4的命令中ip替换成ipv6即可。4、配置接口sys system-viewH3Cint 接口名称如配置G0/0接口:RoNetwork_Deptint g0/0RoNetwork_Dept-GigabitEthernet0/0-进入接口配置视图配置IP地址:RoNetwork_Dept-GigabitEthernet0/0ip add 12.0.0.1 ?-后面跟掩码长度也行,
5、跟掩码也行 INTEGER IP mask length X.X.X.X IP maskRoNetwork_Dept-GigabitEthernet0/0ip add 12.0.0.1 24 -24表示掩码长度为24位,和255.255.255.0等效RoNetwork_Dept-GigabitEthernet0/0undo shutdown-激活接口RoNetwork_Dept-GigabitEthernet0/0dis int g0/0-查看接口信息5、信息回显及tracert为了防止命令被系统输出的消息打断,可以配置信息回显:RoNetwork_Deptinfo-center synch
6、ronous为防止tracert超时,链路两端的设备都要开启以下功能:RoNetwork_Deptip redirects enable 开启设备的ICMP重定向报文的发送功能RoNetwork_Deptip ttl-expires enable开启设备的ICMP超时报文的发送功能RoNetwork_Deptip unreachable enable 开启设备的ICMP目的不可达报文的发送功能6、配置静态路由拓扑图:RoNetwork_Dept端:sysSystem View: return to User View with Ctrl+Z.H3Csys RoNetwork_DeptRoNet
7、work_Deptinfo syncInfo-center synchronous output is on.RoNetwork_Deptint lo0RoNetwork_Dept-LoopBack0ip add 192.168.1.1 24RoNetwork_Dept-LoopBack0int g0/0RoNetwork_Dept-GigabitEthernet0/0ip add 12.0.0.1 24RoNetwork_Dept-GigabitEthernet0/0undo shRoNetwork_Dept-GigabitEthernet0/0ip route 192.168.2.2 25
8、5.255.255.255 12.0.0.2RoNetwork_Dept%Aug 22 11:45:32:415 2014 RoNetwork_Dept IFNET/3/PHY_UPDOWN: Physical state on the interface GigabitEthernet0/0 changed to up.%Aug 22 11:45:32:416 2014 RoNetwork_Dept IFNET/5/LINK_UPDOWN: Line protocol state on the interface GigabitEthernet0/0 changed to up.-系统发出的
9、消息,g0/0接口已经up了RoNetwork_Deptdis ip roDestinations : 17 Routes : 17Destination/Mask Proto Pre Cost NextHop Interface0.0.0.0/32 Direct 0 0 127.0.0.1 InLoop012.0.0.0/24 Direct 0 0 12.0.0.1 GE0/012.0.0.0/32 Direct 0 0 12.0.0.1 GE0/012.0.0.1/32 Direct 0 0 127.0.0.1 InLoop012.0.0.255/32 Direct 0 0 12.0.0.
10、1 GE0/0127.0.0.0/8 Direct 0 0 127.0.0.1 InLoop0127.0.0.0/32 Direct 0 0 127.0.0.1 InLoop0127.0.0.1/32 Direct 0 0 127.0.0.1 InLoop0127.255.255.255/32 Direct 0 0 127.0.0.1 InLoop0192.168.1.0/24 Direct 0 0 192.168.1.1 Loop0192.168.1.0/32 Direct 0 0 192.168.1.1 Loop0192.168.1.1/32 Direct 0 0 127.0.0.1 In
11、Loop0192.168.1.255/32 Direct 0 0 192.168.1.1 Loop0192.168.2.2/32 Static 60 0 12.0.0.2 GE0/0224.0.0.0/4 Direct 0 0 0.0.0.0 NULL0224.0.0.0/24 Direct 0 0 0.0.0.0 NULL0255.255.255.255/32 Direct 0 0 127.0.0.1 InLoop0RoNetwork_Deptping 192.168.2.2 -使用ping命令测试路由是否配置正确Ping 192.168.2.2 (192.168.2.2): 56 data
12、 bytes, press CTRL_C to break56 bytes from 192.168.2.2: icmp_seq=0 ttl=255 time=1.457 ms56 bytes from 192.168.2.2: icmp_seq=1 ttl=255 time=1.113 ms56 bytes from 192.168.2.2: icmp_seq=2 ttl=255 time=1.168 ms56 bytes from 192.168.2.2: icmp_seq=3 ttl=255 time=1.189 ms56 bytes from 192.168.2.2: icmp_seq
13、=4 ttl=255 time=1.049 ms- Ping statistics for 192.168.2.2 -5 packets transmitted, 5 packets received, 0.0% packet lossround-trip min/avg/max/std-dev = 1.049/1.195/1.457/0.140 msRoNetwork_Dept%Aug 22 11:49:29:304 2014 RoNetwork_Dept PING/6/PING_STATISTICS: Ping statistics for 192.168.2.2: 5 packets t
14、ransmitted, 5 packets received, 0.0% packet loss, round-trip min/avg/max/std-dev = 1.049/1.195/1.457/0.140 ms.RoNetwork_DeptRoNetCenter端:sysSystem View: return to User View with Ctrl+Z.H3Csys RoNetCenterRoNetCenterinfo syncInfo-center synchronous output is on.RoNetCenterint lo0RoNetCenter-LoopBack0i
15、p add 192.168.2.2 32RoNetCenter-LoopBack0int g0/0RoNetCenter-GigabitEthernet0/0ip add 12.0.0.2 24RoNetCenter-GigabitEthernet0/0undo shRoNetCenter-GigabitEthernet0/0quitRoNetCenterip ro 192.168.1.1 255.255.255.255 12.0.0.1RoNetCenterdis ip roDestinations : 14 Routes : 14Destination/Mask Proto Pre Cos
16、t NextHop Interface0.0.0.0/32 Direct 0 0 127.0.0.1 InLoop012.0.0.0/24 Direct 0 0 12.0.0.2 GE0/012.0.0.0/32 Direct 0 0 12.0.0.2 GE0/012.0.0.2/32 Direct 0 0 127.0.0.1 InLoop012.0.0.255/32 Direct 0 0 12.0.0.2 GE0/0127.0.0.0/8 Direct 0 0 127.0.0.1 InLoop0127.0.0.0/32 Direct 0 0 127.0.0.1 InLoop0127.0.0.
17、1/32 Direct 0 0 127.0.0.1 InLoop0127.255.255.255/32 Direct 0 0 127.0.0.1 InLoop0192.168.1.1/32 Static 60 0 12.0.0.1 GE0/0192.168.2.2/32 Direct 0 0 127.0.0.1 InLoop0224.0.0.0/4 Direct 0 0 0.0.0.0 NULL0224.0.0.0/24 Direct 0 0 0.0.0.0 NULL0255.255.255.255/32 Direct 0 0 127.0.0.1 InLoop0RoNetCenter配置等价静
18、态路由RoNetwork_Dept端:RoNetwork_Deptint g0/1RoNetwork_Dept-GigabitEthernet0/1ip add 21.0.0.1 24RoNetwork_Dept-GigabitEthernet0/1undo shRoNetwork_Dept-GigabitEthernet0/1quitRoNetwork_Deptip ro 192.168.2.2 255.255.255.255 21.0.0.2RoNetwork_Deptdis ip roDestinations : 21 Routes : 22Destination/Mask Proto
19、Pre Cost NextHop Interface0.0.0.0/32 Direct 0 0 127.0.0.1 InLoop012.0.0.0/24 Direct 0 0 12.0.0.1 GE0/012.0.0.0/32 Direct 0 0 12.0.0.1 GE0/012.0.0.1/32 Direct 0 0 127.0.0.1 InLoop012.0.0.255/32 Direct 0 0 12.0.0.1 GE0/021.0.0.0/24 Direct 0 0 21.0.0.1 GE0/121.0.0.0/32 Direct 0 0 21.0.0.1 GE0/121.0.0.1
20、/32 Direct 0 0 127.0.0.1 InLoop021.0.0.255/32 Direct 0 0 21.0.0.1 GE0/1127.0.0.0/8 Direct 0 0 127.0.0.1 InLoop0127.0.0.0/32 Direct 0 0 127.0.0.1 InLoop0127.0.0.1/32 Direct 0 0 127.0.0.1 InLoop0127.255.255.255/32 Direct 0 0 127.0.0.1 InLoop0192.168.1.0/24 Direct 0 0 192.168.1.1 Loop0192.168.1.0/32 Di
21、rect 0 0 192.168.1.1 Loop0192.168.1.1/32 Direct 0 0 127.0.0.1 InLoop0192.168.1.255/32 Direct 0 0 192.168.1.1 Loop0192.168.2.2/32 Static 60 0 12.0.0.2 GE0/0 21.0.0.2 GE0/1224.0.0.0/4 Direct 0 0 0.0.0.0 NULL0224.0.0.0/24 Direct 0 0 0.0.0.0 NULL0255.255.255.255/32 Direct 0 0 127.0.0.1 InLoop0RoNetCente
22、r端:RoNetCenterint g0/1RoNetCenter-GigabitEthernet0/1ip add 21.0.0.2 24RoNetCenter-GigabitEthernet0/1undo shRoNetCenter-GigabitEthernet0/1quitRoNetCenterip ro 192.168.1.1 255.255.255.255 21.0.0.1RoNetCenterdis ip roDestinations : 18 Routes : 19Destination/Mask Proto Pre Cost NextHop Interface0.0.0.0/
23、32 Direct 0 0 127.0.0.1 InLoop012.0.0.0/24 Direct 0 0 12.0.0.2 GE0/012.0.0.0/32 Direct 0 0 12.0.0.2 GE0/012.0.0.2/32 Direct 0 0 127.0.0.1 InLoop012.0.0.255/32 Direct 0 0 12.0.0.2 GE0/021.0.0.0/24 Direct 0 0 21.0.0.2 GE0/121.0.0.0/32 Direct 0 0 21.0.0.2 GE0/121.0.0.2/32 Direct 0 0 127.0.0.1 InLoop021
24、.0.0.255/32 Direct 0 0 21.0.0.2 GE0/1127.0.0.0/8 Direct 0 0 127.0.0.1 InLoop0127.0.0.0/32 Direct 0 0 127.0.0.1 InLoop0127.0.0.1/32 Direct 0 0 127.0.0.1 InLoop0127.255.255.255/32 Direct 0 0 127.0.0.1 InLoop0192.168.1.1/32 Static 60 0 12.0.0.1 GE0/0 21.0.0.1 GE0/1192.168.2.2/32 Direct 0 0 127.0.0.1 In
25、Loop0224.0.0.0/4 Direct 0 0 0.0.0.0 NULL0224.0.0.0/24 Direct 0 0 0.0.0.0 NULL0255.255.255.255/32 Direct 0 0 127.0.0.1 InLoop0测试:RoNetwork_Deptping 192.168.2.2Ping 192.168.2.2 (192.168.2.2): 56 data bytes, press CTRL_C to break56 bytes from 192.168.2.2: icmp_seq=0 ttl=255 time=0.935 ms56 bytes from 1
26、92.168.2.2: icmp_seq=1 ttl=255 time=1.156 ms56 bytes from 192.168.2.2: icmp_seq=2 ttl=255 time=0.732 ms56 bytes from 192.168.2.2: icmp_seq=3 ttl=255 time=1.301 ms56 bytes from 192.168.2.2: icmp_seq=4 ttl=255 time=0.733 ms- Ping statistics for 192.168.2.2 -5 packets transmitted, 5 packets received, 0
27、.0% packet lossround-trip min/avg/max/std-dev = 0.732/0.971/1.301/0.227 msRoNetCenterping -r 192.168.1.1-“-r”表示“Record route”,记录路由Ping 192.168.1.1 (192.168.1.1): 56 data bytes, press CTRL_C to break56 bytes from 192.168.1.1: icmp_seq=0 ttl=255 time=0.827 msRR: 21.0.0.1 12.0.0.256 bytes from 192.168.
28、1.1: icmp_seq=1 ttl=255 time=0.964 msRR: 12.0.0.1 12.0.0.256 bytes from 192.168.1.1: icmp_seq=2 ttl=255 time=1.895 msRR: 21.0.0.1 12.0.0.256 bytes from 192.168.1.1: icmp_seq=3 ttl=255 time=0.673 msRR: 12.0.0.1 12.0.0.256 bytes from 192.168.1.1: icmp_seq=4 ttl=255 time=0.905 msRR: 21.0.0.1 12.0.0.2-
29、Ping statistics for 192.168.1.1 -5 packets transmitted, 5 packets received, 0.0% packet lossround-trip min/avg/max/std-dev = 0.673/1.053/1.895/0.432 ms-数据包被轮流在两条链路上发送,但是奇怪的是,只从一条链路返回,这与GNS3的Cisco路由器不一样,Cisco的是从哪条链路出去就从哪条链路返回:参考:R1#pingProtocol ip:Target IP address: 192.168.2.2Repeat count 5:Datagram
30、 size 100:Timeout in seconds 2:Extended commands n: ySource address or interface:Type of service 0:Set DF bit in IP header? no:Validate reply data? no:Data pattern 0xABCD:Loose, Strict, Record, Timestamp, Verbosenone: rNumber of hops 9 :Loose, Strict, Record, Timestamp, VerboseRV: r% No room for that optionLoose, Strict, Record, Timestamp, VerboseRV: Record% No room for that optionLoose, Strict, Record, Timestamp, VerboseRV:Sweep range of sizes n:Type escape sequence to
copyright@ 2008-2022 冰豆网网站版权所有
经营许可证编号:鄂ICP备2022015515号-1