1、Lync Server 之初次安装Lync Server 2013之初次安装原创作品,允许转载,转载时请务必以超链接形式标明文章原始出处、作者信息和本声明。否则将追究法律责任。Lync 2013安装 1. IIS 7.5 role servicesThe following table indicates the required IIS 7.5 role servicesAdd-WindowsFeature Web-Server, Web-Static-Content, Web-Default-Doc, Web-Scripting-Tools, Web-Windows-Auth, Web-A
2、sp-Net, Web-Log-Libraries, Web-Http-Tracing,Web-Stat-Compression, Web-Default-Doc, Web-ISAPI-Ext, Web-ISAPI-Filter, Web-Http-Errors, Web-Http-Logging, Web-Net-Ext, Web-Client-Auth, Web-Filtering, Web-Mgmt-Console,Web-Asp-Net, Web-Dyn-Compression, Web-Mgmt-Console,MSMQ-Server, MSMQ-Directory,Desktop-
3、Experience, Web-Asp-Net45 restart2. Configure File Storage1. Click Start, point to All Programs, point to Administrative Tools, and then click DFS Management.2. In the console tree of the DFS Management snap-in, right-click the namespace server (for example ), and then click Edit Settings.3. Select
4、Shared Folder Permissions.4. Select Use Custom Permissions.5. For the Administrator group, select the following under Allow:a) Full Controlb) Changec) Read6. Click Apply, and then click OK.3. Install Lync Server Administrative Tools1. Log on as a local administrator (minimum requirement) to the comp
5、uter where you want to install the administrative tools. If you are logged on as an a standard user on the Windows Vista or Windows 7 operating systems, and User Account Control (UAC) is enabled, you will be prompted for the local administrator or a domain equivalent user name and password.2. Locate
6、 the installation media on your computer, and then double-click Setupamd64Setup.exe.3. If you are prompted to install the Microsoft Visual C+ 2008 distributable, click Yes.4. On the Microsoft Lync Server 2013 Preview Installation Location page, click OK. Change this path to another location or drive
7、 if you need to have the files installed to another location.5. On the End User License Agreement page, review the license terms, click I accept, and then click OK. This step is required before you can continue.6. On the Microsoft Lync Server 2013 Preview Deployment Wizard page, click Install Topolo
8、gy Builder.7. When the installation successfully completes, click Exit.8.4. Run Schema Preparation1. Log on to a computer in the forest as a member of the Schema Admins group and with administrator rights on the schema master.2. Install Lync Server Core components as follows:a) From the Lync Server
9、2013 Preview installation folder or media, run Setup.exe to start the Lync Server Deployment Wizard.b) If you are prompted to install the Microsoft Visual C+ Redistributable, click Yes.c) The Lync Server 2013 Preview Setup dialog box prompts you for a location to install the Lync Server files. Choos
10、e the default location or Browse to a location of your choice, and then click Install.d) On the License Agreement page, check I accept the terms in the license agreement, and then click OK. The installer installs the Lync Server 2013 Preview Core Components.3. Start the Lync Server Management Shell:
11、 Click Start, click All Programs, click Microsoft Lync Server 2013 Preview, and then click Lync Server Management Shell.4. Run cmdletInstall-CsAdServerSchema5. Use the following cmdlet to verify that schema preparation ran to completion.Get-CsAdServerSchemaThis cmdlet returns a value of SCHEMA_VERSI
12、ON_STATE_CURRENT if schema preparation was successful6. Wait for Active Directory replication to complete or force replication.5. Run Forest Preparation1. Start the Lync Server Management Shell: Click Start, click All Programs, click Microsoft Lync Server 2013 Preview, and then click Lync Server Man
13、agement Shell.2. Run:Enable-CsAdForest -GroupDomain S is my domain name3. To verify that forest preparation was successfulLog on to a computer that is joined to a domain as a member of the Domain Admins group in the forest root domain.1. Start the Lync Server Management Shell: Click Start, click All
14、 Programs, click Microsoft Lync Server 2013 Preview, and then click Lync Server Management Shell.2. Run:Get-CsAdForestThis cmdlet returns a value of LC_FORESTSETTINGS_STATE_READY if forest preparation was successful.6. Run Domain PreparationTo use cmdlets to prepare the domain1.Log on to any server
15、in the domain as a member of the Domain Admins group.2.Install Lync Server Core components as follows:a. From the Lync Server 2013 Preview installation folder or media, run Setup.exe to start the Lync Server Deployment Wizard.b. If you are prompted to install the Microsoft Visual C+ Redistributable,
16、 click Yes.c. The Lync Server 2013 Preview Setup dialog box prompts you for a location to install the Lync Server files. Choose the default location or Browse to a location of your choice, and then click Install.d. On the License Agreement page, check I accept the terms in the license agreement, and
17、 then click OK. The installer installs the Lync Server 2013 Preview Core Components.3.Start the Lync Server Management Shell: Click Start, click All Programs, click Microsoft Lync Server 2013 Preview, and then click Lync Server Management Shell.4.Run:Enable-CsAdDomain -Domain If you do not specify t
18、he Domain parameter, the default is the local domain.5.To verify that domain preparation was successfulGet-CsAdDomain -Domain -GlobalSettingsDomainController If you do not specify the Domain parameter, the default is the local domain.This cmdlet returns a value of LC_DOMAINSETTINGS_STATE_READY if do
19、main preparation was successful.7. Design the topology1. Log on to the computer where Topology Builder is installed as a member of the Domain Admins group and the RTCUniversalServerAdmins group.2. Start Topology Builder: Click Start, click All Programs, click Microsoft Lync Server 2013 Preview, and
20、then click Lync Server Topology Builder.3. Start Topology Builder: ClickStart, clickAll Programs, clickMicrosoft Lync Server 2013 Preview, and then clickLync Server Topology Builder.4. In Topology Builder, selectNew Topology. You are prompted for a location and file name for saving the topology. Giv
21、e the topology file a meaningful name and accept the default extension of .tbxml. ClickOK.5. Navigate to the location where you want to save the new topology XML file, enter a name for the file, and then clickSave.6. On theDefine the primary domainpage, enter the name of the primary SIP domain for y
22、our organization, and then clickNext.7. On theSpecify additional supported domainspage, enter the names of additional domains, if any, and then clickNext.8. On theDefine the first sitepage, enter a name and a description for the first site, and then clickNext.9. On theSpecify site detailspage, enter
23、 the location information for the site, and then clickNext.10.On theNew topology was successfully definedpage, ensure theOpen the New Front End Wizard when this wizard closescheck box is selected, and then clickFinish8. Define and Configure a Front End Pool1. In the Define New Front End Pool Wizard,
24、 on the Define the New Front End pool page, click Next.2. On the Define the Front End pool FQDN page, enter a fully qualified domain name (FQDN) for the pool you are creating, click Enterprise Edition Front End pool, and then click Next.3. On the Define the computers in this pool page, enter a compu
25、ter FQDN for the first Front End Server in the pool, and then click Add. Repeat this step for any additional computers (up to eight) that you want to add to the pool, and then click Next.4. On the Select features page, select the check boxes for the features that you want on this Front End pool. For
26、 example, if you are deploying only instant messaging (IM) and presence features, you would select the Conferencing check box to allow multiparty IM, but would not select the Dial-in (PSTN) conferencing, Enterprise Voice, or Call Admission Control check boxes, because they represent voice, video, an
27、d collaborative conferencing features.a) Conferencing This selection enables a rich set of features including:i. IM with more than two parties in an IM session.ii. Conferencing, which includes document collaboration, application sharing, and desktop sharing.iii. A/V conferencing, which enables users
28、 to have real-time audio/video (A/V) conferences without the need for external services such as the Live Meeting service or a third-party audio bridge.b) Dial-in (PSTN) conferencing Allows users to join the audio portion of a Lync Server 2013 Preview conference by using a public switched telephone n
29、etwork (PSTN) phone without requiring an audio conferencing provider.c) Enterprise Voice Enterprise Voice is the Voice over IP (VoIP) solution in Lync Server 2013 Preview that allows users to make and receive phone calls. You would deploy this feature if you plan to use Lync Server 2013 Preview for
30、voice calls, voice mail, and other functions that use a hardware device or a software client.d) Call admission control (CAC) CAC determines, based on available network bandwidth, whether to allow real-time communications sessions such as voice or video calls to be established. If you have deployed o
31、nly IM and presence, CAC is not needed because neither of these two features uses CAC.e) Archiving Archiving provides a way for you to archive IM content, conferencing (meeting) content, or both that is sent through Lync Server 2013 Preview.f) Monitoring Monitoring Server enables you to collect nume
32、rical data that describes the media quality on your network and endpoints, usage information related to VoIP calls, IM messages, A/V conversations, meetings, application sharing, and file transfers, and call error and troubleshooting information for failed calls.5. On the Select collocated server roles page, you can to collocate the Medi
copyright@ 2008-2022 冰豆网网站版权所有
经营许可证编号:鄂ICP备2022015515号-1