戴尔DELL笔记本最新BIOS 中英文对照表.docx

1、戴尔DELL笔记本最新BIOS 中英文对照表 （有些项目为机器可选配置）General 常规信息OptionDescription中文System Information系统信息This section lists out the primary hardware features of the system. There are no configurable options in this section, only information.Lists the the following: System Information oBIOS Version oService Tag oAss

2、et Tag oOwnership Tag oManufacture Date oOwnership Date Memory Information oMemory Installed oMemory Available oMemory Speed oMemory Channel Mode oMemory Technology oDIMM A Size oDIMM B Size Processor Information oProcessor Type oCore Count oProcessor ID oCurrent Clock Speed oMinimum Clock Speed oMa

3、ximum Clock Speed Device Information oPrimary Hard Drive oModular Bay Device oSystem eSATA Device oDock eSATA Device ooVideo Controller oVideo BIOS Version oVideo Memory oPanel Type oNative Resolution ooAudio Controller oModem Controller oWi-Fi Device oCellular Device oBluetooth Device 该选项列出系统的主要硬件信

4、息。此处仅提供信息，无法修改。 系统信息 oBIOS 版本 o机器编号 o资产编号 oOwnership编号 o出厂日期 oOwnership日期 内存信息 o安装内存容量 o可用内容容量 o当前内存频率 oMemory通道 oMemory技术 oDIMM A尺寸 oDIMM B尺寸 CPU信息 oCPU型号 oCPU核数（几核） oCPU ID o当前时钟频率 o最小时钟频率 o最大时钟频率 设备信息 o主硬盘容量 o光驱型号 o系统eSATA设备 oDock eSATA 设备 oo显卡 o显卡BIOS版本 o显存大小 o液晶屏类型 o分辨率 oo声卡 oModem控制器 oWi-Fi 设备

5、型号 oCellular Device o蓝牙 Battery Information电池信息Indicates the primary battery and the media bay battery status. Also displays the AC adapter type connected to the system.侦测主电池和第二块电池状态，也显示AC 外接电源的型号。Boot Sequence启动顺序The computer attempts to boot from the sequence of devices specified in this list: Dis

6、kette drive USB Storage Device CD/DVD/CD-RW Drive. Internal HDD (IRRT) Cardbus NIC Onboard NIC This list specifies the order that the BIOS searches devices when trying to find an operating system to boot. To change the boot order, select the device to be changed in the list then click the up/down ar

7、rows or use the keyboard PgUp/PgDn keys to change the boot order of the device. The boot devices can also be de-selected from the list using the check boxes.This also where the UEFI boot option can be enable or disable.计算机尝试从以下列表顺序启动： 软驱 USB存储设备 光驱 Internal HDD (IRRT) Cardbus NIC Onboard NIC 我们可以勾选需

8、要启动的设备。并在界面右侧对显示的设备设置启动的顺序，可以通过鼠标也可以通过上下键选择。我们可以通过选择UEFI BIOS启动，点击“Add Boot Option”自定义启动选项。Date/Time日期/时间Displays current date and time settings.显示当前的日期和时间System Configuration 系统配置OptionDescription描述Integrated NIC集成网卡Enables or disables the onboard LAN controller. The settings are Disabled, Enabled

9、and Enabled w/PXE.Default setting: Enabled w/PXE启用或禁用主板LAN控制器；设置有：禁用，启用或启用w/PXE；默认设置是启用w/PXEParallel Port并口This field determines how the parallel port on the docking station operates. The settings are Disabled, AT, PS2 and ECP.Default setting: ECP并口设置选项：禁用，AT，PS2 和ECP默认设置是ECP。Serial Port串口This field

10、 determines how the integrated serial port operates. The settings are Disabled, COM1, COM2, COM3 and COM4.Default setting: COM1串口设置选项：禁用，COM1，COM2，COM3，COM4默认设置是COM1SATA OperationSATA设置This option configures the operating mode of the internal SATA hard drive controller. The settings are Disabled, AT

11、A, AHCI, and RAID On.Default setting: RAID On = SATA is configured to support RAID modeSATA Operation 设置选项：禁用，ATA ， AHCI 和 Raid On默认设置是 Raid On=SATA 设置支持RaidMiscellaneous Devices多种设备设置Use the check boxes to enable/disable the following devices: Internal Modem Module Bay ExpressCard or PC Card Media

12、Card, PC Card and 1394 External USB Port Microphone eSATA Ports Hard Drive Free Fall Protection Camera / Microphone Default setting: All enabled.请点击复选框启用/禁用下面设备： 内置Modem 模块设备 ExpressCard 或 PC Card SD卡, PC卡和1394 外置USB口 内置麦克风 eSATA口 自由落体硬盘保护 摄像头 / 麦克风 默认所有设备启用。Latitude On； ReaderThis field lets you ch

13、oose the operating mode of the Latitude On； Reader. Default setting: Enabled启用或禁用Latitude On Reader默认启用Latitude On Reader。Keyboard Illumination键盘背景光（如没有配置背景光键盘该项不会出现）This field lets you choose the operating mode of the keyboard illumination feature. Settings are Disabled, Auto ALS and Input and Auto

14、 Input OnlyDefault setting: Disabled键盘背景光设置选择：禁用，自动ALS调节，自动调节默认设置禁用键盘背景光。Video 显示设置OptionDescription描述Ambient Light Sensor环境感光器Enabling ambient light sensor will allow your system to automatically change the brightness of your systems LCD panel based on the amount of light in the environment.Default

15、 setting: Disabled自动根据周围环境改变显示器的亮度默认设置禁用。LCD BrightnessLCD亮度This option (represented by a slider bar for On Battery and On AC) sets the panel brightness when the ambient light sensor is off.在环境观光器关闭时，可以分别设定连接电源或电池时显示器的亮度。Security 安全设置OptionDescription描述Admin Password管理员密码This field lets you set, cha

16、nge, or delete the administrator (admin) password (sometimes called the setup password). The admin passwaord enables several security features when set including: Restricts changes to the settings in Setup Restricts the boot devices listed in the F12 Boot Menu to those enabled in the Boot Sequence f

17、ield. Prohibits changes to the owner and asset tags. Substitutes for the system password if the system prompts for a password during power on. Successful changes to this password take effect immediately.Default Setting: Not setNOTE: If you delete the admin password, the system password is also delet

18、ed. Also, the admin password can be used to delete the HDD password. For this reason, you cannot set an admin password if a system password or HDD is already set. The admin password must be set first if used in conjunction with a system and/or HDD password. 该页面可以设置，修改，或删除Admin 密码。设置了Admin密码将启用下面安全功能

19、： 限制改变BIOS设置 限制F12启动菜单的设备 禁止修改Owner和Asset编号 在POST界面可以替代system password 默认没有设置Admin 密码。注意：如果删除Admin 密码，System 密码也被删除。Admin密码可以被使用去删除硬盘密码。但是必须首先设置Admin密码；如果已经设置了System密码或硬盘密码，不能再设置Admin密码。System Password系统密码This field lets you set, change, or delete the system password (previously called the Primary p

20、assword).Default Setting: Not set该页面可以设置，修改，或删除System 密码。（之前版本将Primary密码）默认没有设置System密码。Internal HDD Password内置硬盘密码This field lets you set, change, or delete the password on the systems internal hard disk drive (HDD). Successful changes take place immediately and require a system restart. The HDD pa

21、ssword travels with the hard drive, so the HDD is protected even when installed in another system. Default Setting: Not set该页面可以设置，修改，或删除硬盘密码。硬盘密码将跟随硬盘，将硬盘连接到其他机器，也需要输入硬盘密码。默认没有设置硬盘密码。Password Bypass密码跳过This option lets you bypass the system and internal HDD password prompts during a system restart

22、or when resuming from a standby state. Settings are Disabled and Reboot BypassThe system will always prompt for the set system and internal HDD password when powered on from an off state (cold boot).Default Setting: Disabled在系统重启或者休眠恢复状态，让你绕过硬盘和System密码。设置选项：禁用和重启绕过。系统关机到开机（冷启动时），仍然需要输入密码。默认设置：禁用Pas

23、sword Change密码修改设置This option lets you determine whether changes to the System and HDD passwords are permitted when an Admin password is set. Use the check box to allow or disallow changes.Default Setting: Allow Non-Admin Password Changes checked该选项启用后是在设置了Admin密码后，可以对系统和硬盘密码进行修改和设置，但不能修改BIOS其他项目；默认

24、选择允许对非Admin密码修改。可以在需修改的页面的点击Unlock后，输入Admin密码对BIOS进行修改。Strong Password强安全密码This option enforces strong passwords. If enabled, all passwords must contain at least one uppercase character, one lowercase character and be at least 8 characters long. Enabling this feature automatically changes the defaul

25、t minimum password length to 8 charactersDefault Setting: Disabled启用强大密码功能，所有的密码设置时必须包括至少一个大写字母和一个小写字母，至少8位。默认禁用。TPM SecurityTPM安全设置This option lets you control whether the Trusted Platform Module (TPM) in the system is enabled and visible to the operating system. When disabled (check box is empty),

26、 the BIOS will not turn on the TPM during POST. The TPM will be non-functional and invisible to the operating system. When enabled (check box filled) the BIOS will turn the TPM on during POST so the it can be used by the operating system.NOTE: Disabling this option does not change any settings you m

27、ay have made to the TPM, nor does it delete or change any information or keys you may have stored there. It simply turns off the TPM so that it cannot be used. When you re-enable the TPM, it will function exaclty as it did before it was disabled. Once TPM is enabled (check box filled), system will b

28、e shut down and restarted automatically before the available settings are visible.The available settings are: Deactivate, Activate, and Clear.With the TPM in Deactivate mode it will not execute any commands that use the resources of the TPM, nor will it allow any access to stored owner information.T

29、he Clear setting allows the owner information stored in the TPM to be cleared. Use this to restore the TPM to its defalut state if you lose or forget the owner authentication data. TPM模块在中国大陆区域没有提供。该项让您控制是否在操作系统下是否启用或者可见TPM。当禁用TPM （复选框为空），在POST界面，BIOS不能启用TPM。在操作系统下，TPM不可见，无功能。当启用TPM， 在POST界面，BIOS即可启

30、用TPM，在操作系统下，TPM可以正常使用。一旦TPM启用，系统将自动重启。可以选择的设置项：不激活、激活、清除TPM信息Computrace；追踪功能This field lets you activate or disable the BIOS module interface of the optional Computrace software. The settings are Deactivate, Disable, and Activate.Default Setting: DeactivateNOTE: The Activate and Disable options will

31、 permanately activate or disable the feature and no further changes will be allowed. 激活/不激活/关闭&ldquo；丢失追踪功能&rdquo；。需要专业软件支持。(国内一般不提供该功能。）默认：不激活。CPU XD SupportCPU XD支持This field enables or disables the Execute Disable mode of the processor. Use the check box to enable / disable this feature.Default setting: Enabled启用或禁用CPU数据执行保护默认启用。Non-Admin Se