1、机械专业外文文献翻译对振动侦查和测量的一种实用方法英文原文A Practical Approach to Vibration Detection and MeasurementPhysical Principles and Detection TechniquesBy: John Wilson, the Dynamic Consultant, LLCThis tutorial addresses the physics of vibration; dynamics of a spring mass system; damping; displacement, velocity, and acc
2、eleration; and the operating principles of the sensors that detect and measure these properties.Vibration is oscillatory motion resulting from the application of oscillatory or varying forces to a structure. Oscillatory motion reverses direction. As we shall see, the oscillation may be continuous du
3、ring some time period of interest or it may be intermittent. It may be periodic or nonperiodic, i.e., it may or may not exhibit a regular period of repetition. The nature of the oscillation depends on the nature of the force driving it and on the structure being driven. Motion is a vector quantity,
4、exhibiting a direction as well as a magnitude. The direction of vibration is usually described in terms of some arbitrary coordinate system (typically Cartesian or orthogonal) whose directions are called axes. The origin for the orthogonal coordinate system of axes is arbitrarily defined at some con
5、venient location.Most vibratory responses of structures can be modeled as single-degree-of-freedom spring mass systems, and many vibration sensors use a spring mass system as the mechanical part of their transduction mechanism. In addition to physical dimensions, a spring mass system can be characte
6、rized by the stiffness of the spring, K, and the mass, M, or weight, W, of the mass. These characteristics determine not only the static behavior (static deflection, d) of the structure, but also its dynamic characteristics. If g is the acceleration of gravity:F = MAW = MgK = F/d = W/dd = F/K = W/K
7、= Mg/KDynamics of a Spring Mass System The dynamics of a spring mass system can be expressed by the systems behavior in free vibration and/or in forced vibration. Free Vibration. Free vibration is the case where the spring is deflected and then released and allowed to vibrate freely. Examples includ
8、e a diving board, a bungee jumper, and a pendulum or swing deflected and left to freely oscillate.Two characteristic behaviors should be noted. First, damping in the system causes the amplitude of the oscillations to decrease over time. The greater the damping, the faster the amplitude decreases. Se
9、cond, the frequency or period of the oscillation is independent of the magnitude of the original deflection (as long as elastic limits are not exceeded). The naturally occurring frequency of the free oscillations is called the natural frequency, fn: (1) Forced Vibration. Forced vibration is the case
10、 when energy is continuously added to the spring mass system by applying oscillatory force at some forcing frequency, ff. Two examples are continuously pushing a child on a swing and an unbalanced rotating machine element. If enough energy to overcome the damping is applid, the motion will continue
11、as long as the excitation continues. Forced vibration may take the form of self-excited or externally excited vibration. Self-excited vibration occurs when the excitation force is generated in or on the suspended mass; externally excited vibration occurs when the excitation force is applied to the s
12、pring. This is the case, for example, when the foundation to which the spring is attached is moving. Transmissibility. When the foundation is oscillating, and force is transmitted through the spring to the suspended mass, the motion of the mass will be different from the motion of the foundation. We
13、 will call the motion of the foundation the input, I, and the motion of the mass the response, R. The ratio R/I is defined as the transmissibility, Tr:Tr = R/I Resonance. At forcing frequencies well below the systems natural frequency, RI, and Tr1. As the forcing frequency approaches the natural fre
14、quency, transmissibility increases due to resonance. Resonance is the storage of energy in the mechanical system. At forcing frequencies near the natural frequency, energy is stored and builds up, resulting in increasing response amplitude. Damping also increases with increasing response amplitude,
15、however, and eventually the energy absorbed by damping, per cycle, equals the energy added by the exciting force, and equilibrium is reached. We find the peak transmissibility occurring when fffn. This condition is called resonance. Isolation. If the forcing frequency is increased above fn, R decrea
16、ses. When ff = 1.414 fn, R = I and Tr = 1; at higher frequencies R I and Tr 1. At frequencies when R 0.1 in., to make them practical.The change in intensity or angle of a light beam directed onto a reflective surface can be used as an indication of its distance from the source. If the detection appa
17、ratus is fast enough, changes of distance can be detected as well.The most sensitive, accurate, and precise optical device for measuring distance or displacement is the laser interferometer. With this apparatus, a reflected laser beam is mixed with the original incident beam. The interference patter
18、ns formed by the phase differences can measure displacement down to 100 nm. NIST and other national primary calibration agencies use laser interferometers for primary calibration of vibration measurement instruments at frequencies up to 25 kHz.Electromagnetic and Capacitive Sensors. Another important class of noncontact, special-purpose di
copyright@ 2008-2022 冰豆网网站版权所有
经营许可证编号:鄂ICP备2022015515号-1