1、泥浆固井仪器资料1. Summary This product is mainly used to measure the density of drilling fluids and other fluids. It has been widely applied in the oil fields, geological exploration and laboratories for analysis and measurements of fluid density. Compare with the model YM liquid-densitometer manufactured
2、by our factory, the instrument is made wholly of metallic material and characterized by its impregnability, duration for using, fine anti-impact surfaces, stable measured data and high precision.2. Model and specificationSequence numberModelNameMeasuring range1YM-1Mud balance0.96-2.0g/cm3(8.0-171b/g
3、al)2YM-2Mud balance0.96-2.5g/cm3(8.0-211b/gal)3YM-3Mud balance 0.96-3.0g/cm3(8.0-251b/gal)4YM-5Mud balance 0.7-2.4g/cm3(5.8-201b/gal)5YM-7Mud balance0.1-1.5g/cm3(0.8-131b/gal)3. The main technical parameters of instrumentThe major technical parameters are listed in the following table.Sequence numbe
4、rModelNameMeasuring rangeMeasuring precisionCup volume1YM-1Mud balance0.96-2.0g/cm3(8.0-171b/gal)0.01g/ cm3(0.1lb/gal)140 cm32YM-2Mud balance0.96-2.5g/cm3(8.0-211b/gal)0.01g/ cm3(0.1lb/gal)140 cm33YM-3Mud balance0.96-3.0g/cm3(8.0-251b/gal)0.01g/ cm3(0.1lb/gal)140 cm34YM-5Mud balance0.7-2.4g/cm3(5.8-
5、201b/gal)0.01g/ cm3(0.1lb/gal)140 cm35YM-7Mud balance0.1-1.5g/cm3(0.8-131b/gal)0.01g/ cm3(0.1lb/gal)140 cm31. SummaryThis product is mainly used to measure the density of drilling fluids and other fluids. Compare with the YM model balance, this instrument can make the gas present in fluids released
6、or compressed by virtue of exerting a pressure to the fluids and minimize the influence the natural gas or the air mixed in fluids to the density measurement of drilling fluids, so that the true density of fluids can be measured. The instrument is characterized by the stable measuring data and high
7、precision. It has been widely applied in the oil fields, geological exploration and laboratories for analysis and measurements of fluid density. 2. Model and specificationModel: YYM3. The main technical parameters of instrumentThe major technical parameters are listed in the following table.Sequence
8、 No.NameTechnical parameter1Range of measurement0.9-3.1g/cm3 (7.5-26lb/gal)2Measuring precision0.01g/cm33Cup volume210cm34External size550801501. SummaryThis heater is an instrument attached with 6-speed viscometer. It is mainly used to simulate a certain temperature under the bottom-hole conditions
9、 to measure the rheological parameters, and also used as a heater and an instrument to keep a constant temperature for other fluids. This instrument has been applied extensively to the fields such as petroleum and geological exploration. 2. Model Model: JR3. The major technical parameters of the ins
10、trumentThe major technical parameters of the instrument are listed in the following table.Sequence numberNameTechnical parameter1Rated power supply220V5% 50Hz2Rated power147W3Temperature rangeFrom room temperature to 934Time period of heating 30min5External size of instrument94106100 (mm)1. SummaryN
11、LJ-A torsional spring dynamometer is mainly used to correct the spring dynamometer rigidity and display error of ZNN-D6 electric six-speed rotary viscometer. It used to determine the torsional spring termly for ensuring the accuracy of the viscometer.2. Model and specificationNLJ-A3. The main techni
12、cal parametersThe main technical parameters of the instrument are listed in the following table.Sequence numberNameTechnical parameter1measuring rangeWithin the range of standard value of the rigidity of the spring, can determine in succession(Weight:1g70g)2External size200142300mm1. SummaryMarsh fu
13、nnel is an apparatus used to measure the viscosity of drilling fluids for daily. Adopting the API standard, determine the viscosity of drilling fluids with the time required for a given volume of drilling fluids pouring out from the funnel. The structure of the apparatus is simple. It is convenient
14、for use and applied extensively in the departments dealing with petroleum and geological exploration. 2. Model and specificationSequence numberModelNameDisposition 1MLN-2Mash funnelAttached with plastic sample cup2MLN-3Mash funnelAttached with plastic & stainless steel sample cup3MLN-4Mash funnelAtt
15、ached with plastic & stainless steel sample cup, stop watch1.SummaryShear force meter of drlling fluid measures magnitude of strengthen of grid structure,i.e. stactic shear force,which caused by attraction and bonding among many clay grains.It is the force that can break grid structure of drilling f
16、luid per unit area.Initial and terminal shear force measured are all significative for drilling and protecting hole. 2.ModelModel: QL 3.The major technical parameters of the instrumentThe major technical parameters of the instrument are listed in the following table.Sequence numberNameTechnical para
17、meter1Floating pontoonInner diameter: 35.56mm(1.4 inch),weight:5g2Staff gaugeScale:020 Pa3Cup of drilling fluidFluid level of drilling fluid should be accordant to measuring gauge line,i.e. 0 Pa(N/cm2).Volume is about 500ml. 1.SummaryThis product is mainly used to measure the filtration rate and pre
18、pare the mud cake. I is manufactured according to the API standard and characterized by the suitable structure, convenient operation, prcised measurement and durable use. It has been extensively used in the oil fields, the departments of geological exploration and the laboratories for the analysis a
19、nd measurements of drilling fluids. 2. Model and specificationSequence No.ModelNameAttachment1ZNS-2Intermediate pressure filter pressSingle drilling fluid cup made of aluminum2ZNS-2AIntermediate pressure filter pressSingle drilling fluid cup made of stainless steel3SD33-unit intermediate pressure fi
20、lter press 3-unit drilling fluid cup made of aluminum/stainless steel4SD44-unit intermediate pressure filter press4-unit drilling fluid cup made of aluminum/stainless steel5SD66-unit intermediate pressure filter press6-unit drilling fluid cup made of aluminum/stainless steel1. SummaryThis is a filte
21、r press with differential pressure of 0.69MPa. It can be used to measure the filter loss of drilling fluids and prepare the mud cake formed after filtration. The instrument has been widely applied in the oil fields, geological exploration department and laboratory for analysis and measurements of dr
22、illing fluids.2. Models and specifications Sequence numberModelNameAttachments1ZNS-5AIntermediate pressure filter pressSingle drilling fluid cup2SD6AMulti-unit intermediate pressure filter pressSix drilling fluid cups1. SummaryThe instrument is used to determine penetration depth of drilling fluids.
23、 Put 180 cm3 sand (particle size is between 20 meshes and 40 meshes) on filter screen in transparent cylinder drilling fluids cup with no filter paper. Pour 250cm3 drilling fluids in it and fasten upper cup cover. Put through gas source and adjust pressure to 0.69MPa. Open air release valve and let
24、gas into drilling fluids cup, then begin to measure. It has a filter area of 45.60.6cm2(10.1in2). Pressure is provided by gas that passes by adjustor. Observe penetration depth of drilling fluids through transparent cylinder body. It is widely used in oil field, geologic exploration and laboratory t
25、o analyze and determine drilling fluids.2. Model Model FA-BX3. The main technical parametersThe main technical parameters of the apparatus are listed in the following table.Sequence numberNameTechnical Parameters1Effective filter area18cm22Working pressure0.69MPa3Volume of injected sand180cm34Volume
26、 of injected drilling fluids250 cm35Outline size400250900mm1. SummaryThe Model GGS42 HTHP Filter Press can be used to measure the filtration rate of drilling fluids and cement slurry under the condition of deep wells (HTHP), at the same time can be used to prepare the mud cake formed after filtratio
27、n under the HTHP conditions. It possesses the characters of high precision, small error, simple operation and accurate measured data. The apparatus has been used extensively in various oil-fields, research institutions and laboratories.2. Model and specificationSequence numberModelNameDifference of
28、dispositionFeatures1GGS42-1HTHP filter pressa. Mud sample cup without through hole.b. Heating jacket without insulating layera. Do the common 42 model filtration experiments2GGS42-2HTHP filter pressa. Mud sample cup with through holeb. Heating jacket with insulating layera. Do the experiments for ce
29、ment slurry.b. Heat efficiency is high.1. SummaryThe Model GGS71 HTHP Filtration Press can be used to measure the filtration rate of drilling fluids and cement slurry under the condition of deep wells (HTHP). At the same time, it can be used to prepare the mud cake formed after filtration under the
30、HTHP conditions. It possesses the characters of high precision, little error, simple operation and accurate measured data. The apparatus has been used extensively in various oil-fields, research institutions and laboratories.2. Model and specificationSequence numberModelNameMud sample cupRemarks1GGS
31、71-AHTHP filtration pressa. Sample cup without through hole;b. Sample cup with through holeThe mud sample cup can be ordered according to the requirements3. The main technical parametersThe main technical parameters are listed in the following table. Sequence numberNameTechnical parameters1Power supply220V5%, 50H
copyright@ 2008-2022 冰豆网网站版权所有
经营许可证编号:鄂ICP备2022015515号-1