胖AP升级为瘦AP.docx

1、胖AP升级为瘦AP思科AIR-AP1242AG-C-K9胖AP升级为瘦AP操作手册一、 说明通过思科无线控器实现对AP管理与实现无缝漫游功能，首要条件是把你的AP改为瘦AP工作模式。胖AP在你contral中是不能发现的。如下图：二、 升级过程：1、 升级所需软件及工具升级前，确保将要升级的胖AP的IOS软件到12.3(7)JA及以上！只有软件版本大于等于12.3(7)的胖AP才能够升级成为瘦AP,你可以按照一下的步骤找到升级所需的升级工具和思科AP IOS版本软件： 浏览无线下载页面： 点击你想升级的AP类型，如下图：2、contral 管理界面设置：配置控制器接受Telnet的连接Cont

2、ral 与TFTP时间同步：COMMANDS控制器与升级主机的时间同步你可以在控制器初始化配置时如下，进行控制器的时间设置：Configure a NTP server now? YESno: YESEnter the NTP servers IP address: 192.168.0.25Enter a polling interval between 3600 and 604800 secs: 36002、 AP管理： 初始密码过程：If neither the GUI nor the CLI is available with sufficient privileges, complet

3、e these instructions in order to式use the Mode button:1.Disconnect power from the bridge power injector.Disconnect the power jack for external power.2. Press and hold the MODE button while you reconnect power to the bridge power injector.3.Hold the MODE button until the Status LED turns amber, and th

4、en release the button.The Status LED turns amber in approximately 1 to 2 seconds.4.After the bridge reboots, reconfigure the bridge with the web browser interface, the Telnet interface,or Cisco IOS Software commands.Note: The AP is configured with the factory default values that include:The IP addre

5、ss, which is set to receive an IP address with DHCP. If you do not have a DHCPserver, you can access the bridge using the default IP address of 10.0.0.1 using HTTP/HTTPSor Telnet. Once you gain access to the bridge via Telnet or GUI, you can modify the IPaddress of the bridge.Note: This default IP a

6、ddress of 10.0.0.1 becomes available only for a short period. So, makesure that you assign your own IP address to the默认密码:Cisco这是AP的初始配置：ap#show version Cisco IOS Software, C1240 Software (C1240-K9W7-M), Version 12.4(10b)JA, RELEASE SOFTWARE (fc2)Technical Support: Copyright (c) 1986-2007 by Cisco S

7、ystems, Inc.Compiled Wed 24-Oct-07 15:31 by prod_rel_teamROM: Bootstrap program is C1240 boot loaderBOOTLDR: C1240 Boot Loader (C1240-BOOT-M) Version 12.3(7)JA1, RELEASE SOFTWARE (fc1)ap uptime is 10 minutesSystem returned to ROM by power-onSystem image file is flash:/c1240-k9w7-mx.124-10b.JA/c1240-

8、k9w7-mx.124-10b.JAThis product contains cryptographic features and is subject to UnitedStates and local country laws governing import, export, transfer anduse. Delivery of Cisco cryptographic products does not implythird-party authority to import, export, distribute or use encryption.Importers, expo

9、rters, distributors and users are responsible forcompliance with U.S. and local country laws. By using this product youagree to comply with applicable laws and regulations. If you are unableto comply with U.S. and local laws, return this product immediately. A summary of U.S. laws governing Cisco cr

10、yptographic products may be found at:If you require further assistance please contact us by sending email toexport.cisco AIR-AP1242AG-C-K9 (PowerPCElvis) processor (revision A0) with 24566K/8192K bytes of memory.Processor board ID FOC11523WKPPowerPCElvis CPU at 262Mhz, revision number 0x0950Last res

11、et from power-on1 FastEthernet interface2 802.11 Radio(s)32K bytes of flash-simulated non-volatile configuration memory.Base ethernet MAC Address: 00:1D:A1:FD:41:E6Part Number : 73-10256-06PCA Assembly Number : 800-26918-05PCA Revision Number : A0PCB Serial Number : FOC11523WKPTop Assembly Part Numb

12、er : 800-29233-01Top Assembly Serial Number : FOC11523WKPTop Revision Number : A0Product/Model Number : AIR-AP1242AG-C-K9 Configuration register is 0xFap#show runBuilding configuration.Current configuration : 1330 bytes!version 12.4no service padservice timestamps debug datetime msecservice timestam

13、ps log datetime msecservice password-encryption!hostname ap!enable secret 5 $1$QHD6$cG30WOxUP4MjV89LJnJ70/!no aaa new-model!power inline negotiation prestandard source!username Cisco password 7 106D000A0618!bridge irb! interface Dot11Radio0 no ip address no ip route-cache shutdown station-role root

14、bridge-group 1 bridge-group 1 subscriber-loop-control bridge-group 1 block-unknown-source no bridge-group 1 source-learning no bridge-group 1 unicast-flooding bridge-group 1 spanning-disabled!interface Dot11Radio1 no ip address no ip route-cache shutdown station-role root bridge-group 1 bridge-group

15、 1 subscriber-loop-control bridge-group 1 block-unknown-source no bridge-group 1 source-learning no bridge-group 1 unicast-flooding bridge-group 1 spanning-disabled!interface FastEthernet0 no ip address no ip route-cache duplex auto speed auto bridge-group 1 no bridge-group 1 source-learning bridge-

16、group 1 spanning-disabled!interface BVI1 ip address dhcp client-id FastEthernet0 no ip route-cache!ip http serverno ip http secure-serverip http help-path bridge 1 route ip!line con 0line vty 0 4 login local!endap#给interface BVI1接口配置上IP地址ap(config)#interface BVI1ap(config-if)#ip addap(config-if)#ip

17、address 192.168.0.212 255.255.255.0ap(config-if)#ap(config-if)#no shutap(config-if)#exitap(config)#enablap(config)#user ap(config)#user cisco passap(config)#user cisco password ciscoap(config)#ling vyt 0 4ap(config)#line vty 0 4ap(config-line)#login locaap(config-line)#login local ap(config-line)#ap

18、(config-line)#ap(config-line)#exitap(config)#ap(config)#exitap#wrBuilding configuration.OK测试AP到CONTRAL 与TFTP的联通性。3、 运行升级工具新建.txt文件内容如上：AP ip address ,telnet :user ,telnet :password ,enable:password传文件了：成功：AP变化：Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/2 msap#*Mar 1 00:27:11.928

19、: %SYS-6-CLOCKUPDATE: System clock has been updated from 00:27:11 UTC Fri Mar 1 2002 to 00:27:11 UTC Fri Mar 1 2002, configured from console by cisco on vty0 (192.168.0.25).*Mar 1 00:27:13.252: %SYS-5-CONFIG_I: Configured from console by cisco on vty0 (192.168.0.25)*Apr 21 15:40:57.000: %SYS-6-CLOCK

20、UPDATE: System clock has been updated from 00:27:14 UTC Fri Mar 1 2002 to 15:40:57 UTC Tue Apr 21 2009, configured from console by cisco on vty0 (192.168.0.25).Apr 21 15:40:57.537: %SYS-5-CONFIG_I: Configured from console by cisco on vty0 (192.168.0.25)Apr 21 15:41:22.693: %SYS-7-NV_BLOCK_INIT: Init

21、ialized the geometry of nvramApr 21 15:41:43.876: %SYS-5-RELOAD: Reload requested by cisco on vty0 (192.168.0.25). Reload Reason: Reload Command.Xmodem file system is available.flashfs0: 7 files, 2 directoriesflashfs0: 0 orphaned files, 0 orphaned directoriesflashfs0: Total bytes: 15998976flashfs0:

22、Bytes used: 1871872flashfs0: Bytes available: 14127104flashfs0: flashfs fsck took 24 seconds.Base ethernet MAC Address: 00:1d:a1:fd:41:e6Initializing ethernet port 0.Reset ethernet port 0.Reset done!ethernet link up, 100 mbps, full-duplexEthernet port 0 initialized: link is upLoading flash:/c1240-rc

23、vk9w8-mx/c1240-rcvk9w8-mx.#File flash:/c1240-rcvk9w8-mx/c1240-rcvk9w8-mx uncompressed and installed, entry point: 0x3000executing. Restricted Rights LegendUse, duplication, or disclosure by the Government issubject to restrictions as set forth in subparagraph(c) of the Commercial Computer Software -

24、 RestrictedRights clause at FAR sec. 52.227-19 and subparagraph(c) (1) (ii) of the Rights in Technical Data and ComputerSoftware clause at DFARS sec. 252.227-7013. cisco Systems, Inc. 170 West Tasman Drive San Jose, California 95134-1706Cisco IOS Software, C1240 Software (C1240-RCVK9W8-M), Version 1

25、2.3(11)JX1, RELEASE SOFTWARE (fc1)Technical Support: Copyright (c) 1986-2006 by Cisco Systems, Inc.Compiled Mon 17-Jul-06 11:44 by alnguyenImage text-base: 0x00003000, data-base: 0x0035C940Initializing flashfs.flashfs1: 7 files, 2 directoriesflashfs1: 0 orphaned files, 0 orphaned directoriesflashfs1

26、: Total bytes: 15998976flashfs1: Bytes used: 1871872flashfs1: Bytes available: 14127104flashfs1: flashfs fsck took 3 seconds.flashfs1: Initialization complete.done Initializing flashfs.cisco AIR-AP1242AG-C-K9 (PowerPCElvis) processor (revision A0) with 24566K/8192K bytes of memory.Processor board ID

27、 FOC11523WKPPowerPCElvis CPU at 266Mhz, revision number 0x0950Last reset from reloadLWAPP image version 3.0.51.01 FastEthernet interface32K bytes of flash-simulated non-volatile configuration memory.Base ethernet MAC Address: 00:1D:A1:FD:41:E6Part Number : 73-10256-06PCA Assembly Number : 800-26918-

28、05PCA Revision Number : A0PCB Serial Number : FOC11523WKPTop Assembly Part Number : 800-29233-01Top Assembly Serial Number : FOC11523WKPTop Revision Number : A0Product/Model Number : AIR-AP1242AG-C-K9 Press RETURN to get started!*Mar 1 00:00:05.968: %CDP_PD-4-POWER_OK: Full power - AC_ADAPTOR inline

29、 power source*Mar 1 00:00:05.973: %SYS-5-RESTART: System restarted -Cisco IOS Software, C1240 Software (C1240-RCVK9W8-M), Version 12.3(11)JX1, RELEASE SOFTWARE (fc1)Technical Support: Copyright (c) 1986-2006 by Cisco Systems, Inc.Compiled Mon 17-Jul-06 11:44 by alnguyen*Mar 1 00:00:06.926: %LINK-3-UPDOWN: Interface FastEthernet0, changed state to up*Mar 1 00:00:07.927: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0, changed state to upCisco IOS Software, C1240 Software (C1240-RCVK9W8-M), Version