电力远程自动抄表系统外文翻译.docx

1、电力远程自动抄表系统外文翻译英文原文：Automatic meter reading systemThe present invention relates to automatic meter reading. More particularly, the present invention relates to an automated system for remotely monitoring a plurality of utility meters on command from a host server via an RF outbound broadcast. BACKGRO

2、UND OF THE INVENTION Historically, meters measuring electrical energy, water flow, gas usage, and the like have used measurement devices, which mechanically monitor the subscribers usage and display a reading of the usage at the meter itself. Consequently, the reading of these meters has required th

3、at human meter readers physically go to the site of the meter and manually document the readings. Clearly, this approach relies very heavily on human intervention and, thus, is very costly, time-consuming, and prone to human error. As the number of meters in a typical utilitys service region has inc

4、reased, in some cases into the millions, human meter reading has become prohibitive in terms of time and money. In response, various sensing devices have been developed to automatically read utility meters and store the meter data electronically. These sensing devices, usually optical, magnetic, or

5、photoelectric in nature, are coupled to the meter to record the meter data. Additionally, the meters have been equipped with radio frequency (RF) transceivers and control devices which enable the meters to transmit meter data over an RF link when requested to do so. Hand-held devices have been devel

6、oped which include RF transceivers designed to interface with the meters RF transceivers. These hand-held devices enable the human meter reader to simply walk by the meters location, transmit a reading request over an RF link from the hand-held device to the meters receiving device, wait for a respo

7、nse from the meters sensing and transmitting device, and then record, manually or electronically, the meter data. Similarly, meter reading devices have been developed for drive-by reading systems. Utility vans are equipped with RF transceivers similar to those described in the hand-held example abov

8、e. The human meter reader drives by the subscribers location, with an automated reading system in the utility van. Again, the meters are commanded to report the meter data, which is received in the van via an RF link, where the data is recorded electronically. While this methodology improves upon th

9、e previous approaches, it still requires a significant amount of human intervention and time. Recently, there has been a concerted effort to accomplish meter reading by installing fixed communication networks that would allow data to flow from the meter all the way to the host system without human i

10、ntervention. These fixed communications networks can operate using wire line or radio technology. FIG. 1 shows a conventional fixed communication network for automated meter reading (AMR) technology. As shown in FIG. 1, a fixed communication network having wire line technology in which utility meter

11、s 10 are connected to a wide area network (WAN) consisting of a suitable communications medium, including ordinary telephone lines, or the power lines that feed the meters themselves. One disadvantage of this approach has been that when a number of meters transmit meter data nearly simultaneously, t

12、he inherent latency on the wide area network results in packet collisions, lost data, garbled data, and general degradation of integrity across the system. To compensate for the collisions and interference between data packages destined for the central computer, due to the latency inherent in the WA

13、N, various management schemes have been employed to ensure reliable delivery of the meter data. However, while this approach may be suitable for small systems, it does not serve the needs of a utility which monitors thousands or even millions of meters. In an attempt to better manage the traffic in

14、the WAN, approaches have been developed wherein meter control devices similar to those described above have been programmed to transmit meter data in response to commands received from the central computer via the WAN. By limiting the number of meter reading commands transmitted at a given time, the

15、 central computer controls the volume of data transmitted simultaneously. However, the additional WAN traffic further aggravated the degradation of data integrity due to various WAN latency effects. Thus, while these approaches may serve to eliminate the need for human meter readers, reliance on the

16、 WAN has proven these approaches to be unsatisfactory for servicing the number of meters in the typical service region. Consequently, radio technology has tended to be the medium of choice due to its higher data rates and independence of the distribution network. The latest evolution of automated me

17、ter reading systems have made use of outbound RF communications from a fixed source (usually the utilitys central station), directly to RF receivers mounted on the meters. The meters are also equipped with control devices which initiate the transfer of meter data when commanded to do so by the fixed

18、 source. The meters respond via a WAN as in the previous wire-based example. One disadvantage of these approaches is that there is still far too much interference on the WAN when all of the meters respond at about the same time. Thus, while these approaches reduce some of the WAN traffic (by elimina

19、ting outbound commands over the WAN), they are still unable to accommodate the large number of meters being polled. It is worthy of note that the wire-based systems typically use a single frequency channel and allow the impedance and transfer characteristics of the transformers in the substation to

20、prevent injection equipment in one station from interfering with receivers in another station. This built-in isolation in the network makes time division multiplexing less critical than for radio based metering systems. Typical fixed network radio systems also utilize a single channel to read all me

21、ters but the systems do not have a natural blocking point similar to the substation transformer utilized by distribution line carrier (DLC) networks. Also, the latency inherent in the WAN has contributed significantly to the problems associated with time division multiplexing a single frequency comm

22、unications systems. As a result, the systems require sophisticated management schemes to time division multiplex the channel for optimal utilization. Therefore, a need exists to provide a system whereby a utility company can reliably and rapidly read on the order of one million meters in the absence

23、 of any significant human intervention. Further, a need exists to provide such a system which accommodates changes to the network as well as changes in operating conditions without significant degradation of performance. SUMMARY OF THE INVENTION The present invention fulfills these needs by providin

24、g an automated meter reading system having a host server interfaced to a plurality of nodes, each node communicating with a number of utility meters. In a preferred embodiment, the system has a selection means for selecting a group of non-interfering nodes; and an outbound RF broadcast channel from

25、the host server for communicating with the selected group to initiate the reading of meters that communicate with those nodes and the uploading of meter data provided by those meters to those nodes. This outbound RF broadcast channel can be an existing channel currently being used for demand side ma

26、nagement. In a preferred embodiment, the system also has a two-way communication link over a wide area network between the host server and each of the nodes. In a more preferred embodiment, the host server receives meter data read from at least one million meters in no more than about five minutes.

27、In yet another preferred embodiment, the system also has a number of gateways, each communicating with a plurality of nodes, grouped to form sets of non-interfering gateways. In this embodiment, the system also has a selection means for selecting one of the sets of non-interfering gateways, and a se

28、cond outbound RF broadcast channel from the host server for communicating with the selected set to initiate uploading of meter data from the selected set to the host server. This second outbound RF broadcast channel can be an existing channel currently being used for demand side management. The pres

29、ent invention further fulfills these needs by providing a method for using an outbound RF channel to automatically read meters. In a preferred embodiment, the method comprises the steps of: defining a number of groups of non-interfering nodes: selecting a first group; broadcasting a read command to

30、each node in the first group; selecting a second group; and broadcasting a read command to each node in the second group. In another embodiment, the method further comprises the steps of: reading meter data, in response to the read command, from each meter communicating with the node receiving the r

31、ead command; recording the meter data in a data storage means associated with that node; broadcasting an upload message to each node in the first group; uploading the meter data recorded in the data storage means associated with the nodes of the first group to the host server; broadcasting an upload

32、 message to each node in the second group; and uploading the meter data recorded in the data storage means associated with nodes of the second group to the host server. In yet another embodiment, at least some of the nodes communicate through one of a number of gateways to the host server. In this e

33、mbodiment, the method further comprises the steps of: selecting a first set of non-interfering gateways; broadcasting an upload message to each gateway in the first set; uploading the meter data recorded in the data storage means associated with the nodes that communicate with the first set of non-interfering gateways to the host server; selecting a