NetApp FAS系列安装配置说明.docx

1、NetApp FAS系列安装配置说明NETAPP FAS系列安装配置手册赞融电子上海分公司2003年11月修订控制章节号章节标题修订内容日期修订前版本修订者初建2003-1110 无Laiqy1简介1.1说明本文简要说明了Network Appliance公司FAS系列存储产品配置过程。本手册基于DataOntap 6.4.2P6操作系统1.2适用对象和前提本文是针对赞融电子的内部人员。要求阅读者具有以下方面的专业能力:熟悉Unix操作系统；熟悉Windows操作系统；具有NETAPP FAS系统的基本知识.1.3参考资料Data ONTAP System Administrators Gui

2、deData ONTAP Software Setup Guide1.4术语表NFS：Network File System 网络文件系统CIFS：CommonInternetFileSystem 通用 Internet文件系统NAS：Network Attached Storage 网络附加存储WAFL：Write Anywhere File Layout 随地写入文件格式 2配置过程2.1检查Filer硬件安装2.2设置Filer使用计算机串口连接Filer背板上的Console口使用Windows附件中的超级终端建立连接，参数如下：每秒位数 9600，数据位 8，奇偶校验 无，停止位 1

3、，数据流控制 无 建立连接依次打开Disk Shelf和Filer电源使用setup命令配置Filerfas940 setupPlease enter the new hostname : fas940Do you want to configure virtual network interfaces? n: yNumber of virtual interfaces to configure? 0 3Name of virtual interface #1 : vif1Is vif1 a single s or multi m virtual interface? m sNumber of

4、 links for vif1? 0 2Name of link #1 for vif1 : e5aName of link #2 for vif1 : e5bName of virtual interface #2 : vif2Is vif2 a single s or multi m virtual interface? m sNumber of links for vif2? 0 2Name of link #1 for vif2 : e9aName of link #2 for vif2 : e9bName of virtual interface #3 : vif3Is vif3 a

5、 single s or multi m virtual interface? m sNumber of links for vif3? 0 2Name of link #1 for vif3 : e11aName of link #2 for vif3 : e11bPlease enter the IP address for Network Interface vif1 : 165.204.224.173Please enter the netmask for Network Interface vif1 255.255.0.0: 255.255.254.0Please enter med

6、ia type for vif1 100tx-fd, tp-fd, 100tx, tp, auto (10/100/1000) auto: EnterPlease enter the IP address for Network Interface vif2 : 165.204.224.174Please enter the netmask for Network Interface vif2 255.255.0.0: 255.255.254.0Please enter media type for vif2 100tx-fd, tp-fd, 100tx, tp, auto (10/100/1

7、000) auto: Please enter the IP address for Network Interface vif3 : 165.204.224.175Please enter the netmask for Network Interface vif3 255.255.0.0: 255.255.254.0Please enter media type for vif3 100tx-fd, tp-fd, 100tx, tp, auto (10/100/1000) auto: Please enter the IP address for Network Interface e0

8、: 165.204.224.172Please enter the netmask for Network Interface e0 255.255.0.0: 255.255.254.0Please enter media type for e0 100tx-fd, tp-fd, 100tx, tp, auto auto: Would you like to continue setup through the web interface? n: Please enter the name or IP address of the default gateway: 165.204.224.25

9、4 The administration host is given root access to the filers /etc files for system administration. To allow /etc root access to all NFS clients enter RETURN below.Please enter the name or IP address of the administration host: Please enter timezone GMT: Asia/ShanghaiWhere is the filer located? : Suz

10、hou ChinaWhat language will be used for multi-protocol files (Type ? for list)?:zh.GBKSetting language on volume vol0The new language mappings will be available after rebootMon Sep 29 03:45:14 GMT rc:ALERT: Language on volume vol0 changed to zh.GBKLanguage set on volume vol0Do you want to run DNS re

11、solver? n: yPlease enter DNS domain name : You may enter up to 3 nameserversPlease enter the IP address for first nameserver : 165.204.224.2Do you want another nameserver? n: yPlease enter the IP address for alternate nameserver : 139.95.33.235Do you want another nameserver? n: EnterDo you want to r

12、un NIS client? n: Enter This system will send event messages and weekly reports to Network Appliance Technical Support. To disable this feature, enter options autosupport.support.enable off within 24 hours. Enabling Autosupport can significantly speed problem determination and resolution should a pr

13、oblem occur on your system. For further information on Autosupport, please see:. Press the return key to continue.Now type reboot for changes to take effect.fas940 Reboot 重新启动Filer 之后，进行 cifs setup 安装fas940 cifs setup Enable CIFS access to the filer by a Windows(tm) PC Your filer is currently only v

14、isible to PCs on the same net.Do you wish to make the system visible via WINS? no: yPlease enter next WINS IP address (or return to end list) : 165.204.224.225 Please enter next WINS IP address (or return to end list) : 163.181.3.225 Please enter next WINS IP address (or return to end list) : CIFS r

15、equires local /etc/passwd and /etc/group files for multiprotocol. Default passwd file will be created containing root, pcuser, and nobody.Enter the password for root : Retype the password: This filer is currently licensed for CIFS only. The filer will be configured as a NTFS_only filer. It can be ch

16、anged to a Multiprotocol filer by reissuing the CIFS setup command. The default name of this filer will be FAS940.Do you want to modify this name? no: Enter CIFS supports three types of user authentication: 1. Windows Domain authentication. 2. Windows Workgroup authentication using the filers user a

17、ccounts. 3. /etc/passwd and/or NIS based authentication.What type of authentication will this filer use? 1: 1 The filer will use Windows Domain authentication.Enter the Windows Domain for the filer : It is highly recommended that you create the local administrator account (FAS940administrator) for t

18、his filer. This account enables access to the filer from Windows when domain controllers are not accessible.Create the FAS940administrator account? yes: yesSet the password for FAS940administrator: Retype the password: Mon Sep 29 11:53:46 CST rc:info: User addedMon Sep 29 11:53:46 CST rc:notice: sec

19、urity style for /vol/vol0/ changed from unix to ntfs AMD.COM is a Windows 2000(tm) domain. In order to create this filers domain account, you must supply the name and password of an administrator account with sufficient privilege to add the filer to the AMD.COM domain.Please enter the Windows 2000 u

20、ser AdministratorAMD.COM: admin_mweizhiPassword for admin_mweizhi: CIFS - Logged in as admin_mweizhi. By default, setup creates the filer account in the Active Directory container named Computers. Alternatively, you can install the filer in an organizational unit (OU) by specifying the domain relati

21、ve distinguished name of the OU, as in ou=innerOU,ou=outerOU.Active Directory container for filer account? cn=computers: Enter CIFS - Connecting to domain controller.Mon Sep 29 11:57:22 CST rc:info: Connection with DC SSUZDC2 establishedMon Sep 29 11:57:22 CST nbns_timer:info: All CIFS name registra

22、tions complete for local serverWelcome to the AMD (AMD.COM) Windows 2000(tm) domain.CIFS local server is running.2.3创建volume通过Telnet或串口，用命令行方式创建卷vol create -r disks例，创建名为vol1的卷，RAID组最大为8，包含2块盘vol create /vol/vol1 r 8 2使用vol status r 命令观察初始化进程通过Web界面创建卷在浏览器中输入http:/IP_Address/na_admin点击FilerView，根据提示

23、输入用户名密码从右侧窗口Volume Add在New Volume Name栏中填写新建卷名 vol1在Raid Group Size中填写RAID组的大小 8在Language中选择Simplified Chinese(GBK)选择Automatic Disk Selection在Number of Disks中填写Volume的磁盘数 2点击Add2.4通过CIFS共享通过命令行cifs shares -add e.g. cifs shares add vol1 /vol/vol1通过Web界面设置Filerview CIFS Shares AddShare Name 填写 vol1Mou

24、nt Point 填写 /vol/vol1点击Add2.5通过NFS共享通过命令行exportfs -o anon=0 /vol/vol1或者通过Web界面配置Filerview NFS Manage Exports Insert Line在Path中输入/vol/vol1Permission选择rwAnonymous UID填写0点击OK3FilerView 使用介绍3.1Filer菜单3.1.1Show Status 显示Filer的整体状态，包括Filername, Model, System ID,Version, Disks, Status 等信息3.1.2Manage Licens

25、es 管理Filer 的license 如常用的CIFS, NFS, FCP, iSCSI,SnapRestore, SnapMirror, SnapVault, SyncMirror, MultiStore等，详情可参见 或 （中文网页）3.1.3Report 显示Filer目前配置及使用情况，如 Uptime, Network Interfaces, Disk Usage, System Configuration 等信息3.1.4Syslog Messages 这里是系统的syslog messages 信息，里面会记录系统运行时产生的一些信息，特别是一些系统的报错信息，这些信息非常重要

26、，对于发现各种问题有很大帮助，Netapp Technical Support 也需要这些信息，最好每天都查看一下这里的信息3.1.5Use Command Line 在这里可以使用FilerView自带的telnet 工具，方便你管理时使用Data Ontap系统的命令。注意： a. The console and Telnet share a single session. Commands typed at eitherlocation are echoed to the other location. Messages are displayed at bothlocations. b

27、. Commands entered at the console or through a Telnet session can be abortedby pressing Ctrl-C. 3.1.6Configure Syslog 配置 syslog 包括哪些信息，存放在那个文件中上述两图表示：a. 所有的 err 信息（包括等级比err高的信息）存放在文件 /etc/messages.err （在 Filer 的root volume中）b所有的 info 信息（包括等级比error高的信息）存放在文件 /etc/messages （在 Filer 的root volume中）以下是各种

28、信息的等级，从高到低： EMERG - priority 1, immediate response ALERT - priority 2, less than two hours response CRIT - priority 3, next business day ERR - priority 3, next business day WARNING - priority 4, 2 business days NOTICE - priority 5, informational, no response expected INFO - priority 5, informational

29、, no response expected3.1.7Configure File System 配置文件系统 Map NT Administrator to root ： 是否将NT 的 Administrator 用户映射到 root 用户（默认为 No）Default NT User for Unkown UNIX Users ：未知的 UNIX 用户默认对应的NT 用户Default UNIX User for Unkown NT Users ：未知的 NT 用户默认对应的UNIX 用户（默认为 pcuser ）Minutes a Cred Cache Entry Is Valid ：

30、WAFL文件系统中用户身份凭据缓存记录的有效时间（参见“Data Ontap 6.4 System Administration File Access Management Guide ”315页和318页）3.1.8Configure Autosupport 配置 autosupport 的信息，使autosupport 邮件能够发送到Netapp Technical Support 中心和你指定的邮箱中Mailhosts ：邮件主机From : 指定发送邮件的发送者，Netapp 的回复邮件将发送到这个邮箱To ： autosupport邮件的接收者 （最多5 个）Note To ：简短的抄送邮件的接收者 （最多5个）配置完成之后，请务必点击 “ Apply”按钮来应用配置。3.1.9Test AutoSupp