Isilon 的安装和维护手册.docx

1、Isilon 的安装和维护手册XXXXIsilon 集群安装和维护手册1. XXXX安装设定总览表集群部分Isilon 集群概括安装节点5个保护级别全局N+2：1每节点裸容量（1000为单位）12TB每节点裸容量（1024为单位）集群裸容量（1000为单位）60TB集群裸容量（1024为单位）54TB对外千兆以太网接口20网络设定部分内部网络Infiniband内网地址A内网地址B内网Failover地址外部网络使用网络接口5个节点的共个20千兆接口对外子网1其他对外子网无DNS服务器地址网关地址非飘移管理地址SmartConnect VIP客户端连接Zone名称文件共享部分CIFS（Wind

2、ows文件共享）设定导出/ifs/data/jsb/ifs/data/test其他设定值domain usersNFS设定共享无FTP设定FTP服务开启HTTP设定HTTP文件共享开启2. Isilon 的硬件安装2.1. 前面板和铰链的安装安装左，右铰链支架到机器上将前面板和左右铰链支架用螺丝固定连接显示线缆和前面板的PC板2.2. 滑轨的安装抽出滑轨最内侧的轨道将内侧滑轨安装到Isilon 节点上将导轨固定在机柜上安装Isilon 节点到滑轨上给Isilon 节点加电3. 构建Isilon 集群3.1. 配置集群初始节点用串口线连接一台电脑和Isilon 节点的管理端口在电脑上打开“超级终

3、端”程序配置串口连接的设置Transfer rate: 9600 bps IQ 1440/2250 models 115,200 bps IQ 1920/3000/6000/9000 and IQ Accelerator models 115,200 bps IQ 1920x/3000x/6000x/9000x Data bits: 8 Parity: None Stop bits: 1 Flow control: Hardware提示符下创建root和admin账户和密码接下来，将被询问是否收集报警信息“Would you like to allow Isilon Systems, Inc.

4、 to receive critical alerts from this cluster? no”Isilon 的配置向导自动打开Do you wish to 1 create a new cluster. 2 join an existing cluster. 3 exit wizard and configure manually. Wizard 创建集群Do you wish to 1 create a new cluster. 2 join an existing cluster. 3 exit wizard and configure manually.Wizard 1 1 cre

5、ate a new cluster.按提示配置集群1）Type a new name for the cluster.Set Name isilonCluster name set to isilon2）Cluster Encoding: 1 Windows-SJIS 2 Windows-949 3 Windows-1252 4 EUC-KR 5 EUC-JP 6 EUC-JP-MS 7 UTF-8-MAC 8 UTF-8 9 ISO-8859-1 (Latin-1) 10 ISO-8859-2 (Latin-2) 11 ISO-8859-3 (Latin-3) 12 ISO-8859-4 (

6、Latin-4) 13 ISO-8859-5 (Cyrillic) 14 ISO-8859-6 (Arabic) 15 ISO-8859-7 (Greek) 16 ISO-8859-8 (Hebrew) 17 ISO-8859-9 (Latin-5) 18 ISO-8859-10 (Latin-6) 19 ISO-8859-13 (Latin-7) 20 ISO-8859-14 (Latin-8) 21 ISO-8859-15 (Latin-9) 22 ISO-8859-16 (Latin-10) Enter Use default encoding: UTF-8Set Encoding 3）

7、Configure interface int-a: 1 Configure Netmask 2 Modify IP Ranges Enter Keep the current configuration: Netmask: unset IP Ranges: No ranges set.Configure Interface int-a 14）Type a new netmask.Set int-a Netmask Netmask set to 5）Configure interface int-a: 1 Configure Netmask 2 Modify IP Ranges Enter K

8、eep the current configuration: Netmask: IP Ranges: No ranges set.Configure Interface int-a 26）Manage cluster IP ranges 1 Add an IP range. 2 Delete an IP range. Enter Keep current IP ranges: No ranges set.Modify int-a IP Ranges 17）Enter the low IP address of the range to add.Low IP Address (Add) the

9、high IP address of the range.High IP Address (Add) range added.8）Manage cluster IP ranges 1 Add an IP range. 2 Delete an IP range. Enter Keep current IP ranges: Modify int-a IP Ranges int-a IP ranges configured.9）Configure interface int-a: 1 Configure Netmask 2 Modify IP Ranges Enter Keep the curren

10、t configuration: Netmask: IP Ranges: Configure Interface int-a 10）Select the internal interface to configure. 1 int-a - Primary Internal Interface 2 int-b - Secondary Internal Interface (Failover) Enter Finished with internal interfacesConfigure Internal Interfaces 11）Configure External Subnet 1 Con

11、figure ext-1 Enter Finished configuring External SubnetConfigure External Subnet 112）Configure ext-1Configure ext-1 settings 1 Set Netmask 2 Set MTU 3 Set IP Ranges Enter Keep the current settings: Netmask: unset MTU: 1500 IP Ranges: No ranges setConfigure ext-1 settings 113) Set Netmask for ext-1Ty

12、pe the netmask:ext-1 netmask Configure ext-1 settings 1 Set Netmask 2 Set MTU 3 Set IP Ranges Enter Keep the current settings: Netmask: MTU: 1500 IP Ranges: No ranges setConfigure ext-1 settings 315) Set IP Ranges 1 Add an IP range 2 Delete an IP range Enter Keep current IP ranges: No ranges setSet

13、IP Ranges for ext-1 116) Add an IP rangeType the low IP address of the range to add: the high IP address of the range to add: Set IP Ranges 1 Add an IP range 2 Delete an IP range Enter Keep current IP ranges: - IP Ranges for ext-1 18）Configure ext-1 settings 1 Set Netmask 2 Set MTU 3 Set IP Ranges Enter Keep the current settings: Netmask: MTU: 1500 IP Ranges: - ext-1 settings 19）onfigure default gateway 1 Set Default Gateway Enter Keep current default gateway: Configure default gateway 20）Configure SmartConnect settings 1 SmartConnect Zone Name 2 SmartConnect Service IP Enter K