1、Service Provider: Authorized Service PartnerProcedure Generated: 2013/5/15 11:36:26IMPORTANT:To be sure you have the latest procedure generator application and content, always choose Yes when asked if you want to update the application or repository.REPORT PROBLEMSIf you find any errors in this proc
2、edure or have comments regarding this application, send email to SolVeFeedbackCopyright 2010 2022 EMC Corporation. All rights reserved.Publication Date: May, 2013EMC believes the information in this publication is accurate as of its publication date. The information is subject to change without noti
3、ce.THE INFORMATION IN THIS PUBLICATION IS PROVIDED “AS IS.” EMC CORPORATION MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WITH RESPECT TO THE INFORMATION IN THIS PUBLICATION, AND SPECIFICALLY DISCLAIMS IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.Use, copying, and d
4、istribution of any EMC software described in this publication requires an applicable software license.For the most up-to-date regulatory document for your product line, go to the Technical Documentation and Advisories section on EMC Powerlink.For the most up-to-date listing of EMC trademarks, see th
5、e list of EMC Corporation Trademarks on EMC.com.All other trademarks used herein are the property of their respective owners.ContentsService_Provider_Project_Cust_info.docService Provider, Project Information and Customer Contact formThis form is automatically populated based on the information that
6、 is provided in the Avamar Procedure Generator questionnaire prior to generating the procedure. This information is collected and used for reference purposes when referring back to this procedure at a later date and time.Section 1:Service Provider InformaitonWhat is your name:What is your email addr
7、ess:Section 2:EMC Project InformaitonEMC CSI SR#:EMC Project/PAS ID (or Partner Company Name):Section 3:Customer Account InformationCustomer Site Name:Customer Contact Name:Customer Site Street Address:Customer Site City:Customer Site State/Country:ADS_Rekick_1_Intro_Gen4.docAvamar Data Store Gen4 R
8、e-kick start InstructionsThe purpose of this document is to provide instructions for re-kickstarting an Avamar Data Store Gen4 node. After following these instructions, use the ADS System Installation Manual to complete the installation and implementation of the node.Re-kickstarting is valid for the
9、 following scenarios:New ADS nodes from the factory that were incorrectly imaged.New ADS nodes from the factory whose storage was incorrectly configured.ADS nodes with storage failures that require new OS installation.Additional Reference MaterialObtain the correct Avamar Data Store System Installat
10、ion Manual for Gen4 from the EMC Powerlink web site ().Obtaining Re-kickstart ISO image, Firmware, and DriversThe latest GA Avamar SuSE Linux Enterprise Server 11 SP1 (Gen4) 64-bit custom Avamar installation ISO can be found on the Avamar FTP server. This ISO is a single DVD image that supports all
11、approved Avamar hardware configurations.The download links below are updated as new releases become available. Using the download links below will ensure that you have the latest approved files for your activity.Note:The Avamar FTP site has changed. You can no longer log in and view files using the
12、“dir” command or use the “mget” command. You can use the links below (just click on them) or login as before and “cd” to the correct directory and “get” one file at a time. Easiest thing to do is just click on the links below or cut/paste the link into Internet Explorer or File Explorer and save all
13、 the files in the same directory (to run the md5sum checks).Task1:Download Links for ISO Image, Firmware, and Drivers11.Download the ISO and md5sum filesGen4 (sles11sp1)ftp:/avamar_ftp:anonymous12.Download firmware and driver fileGen4 (sles11sp1) R710If ks_post_script comes up displayed in the explo
14、rer window instead of being downloaded, copy and paste the content into a file called “ks_post_script”.Before performing the next step, first note that the following files from this list are only for use with ADS Gen4 R710 data nodes:RAID_FRMW_LX_R285988.BINRAID_FRMW_LX_R285988.BIN.md5sumFollowing f
15、iles only for use with ADS Gen4 R710 utility nodes:RAID_FRMW_LX_R216024.BINRAID_FRMW_LX_R216024.BIN.md5sum2:Check the Downloaded Files13.Open another command line, preferably in a Unix or DOS environment that has an installed md5sum utility.For Windows see Microsoft KB Article 841290 Availability an
16、d description of the File Checksum Integrity Verifier utility14.Ensure the ISO, firmware, driver, script, and md5sum files are in the same directory.15.Type the following commands:md5sum -c avamar-kickstart-SLES11-SP1-64-0027.iso.md5summd5sum -c IDRAC6_FRMW_LX_R271693.BIN.md5summd5sum -c NETW_FRMW_L
17、X_R270088.BIN.md5summd5sum -c R710_BIOS_LX_2.2.10.BIN.md5summd5sum -c RAID_FRMW_LX_R216024.BIN.md5summd5sum -c RAID_FRMW_LX_R285987.BIN.md5summd5sum -c SASBP_FRMW_LX_R203413.BIN.md5summd5sum -c ks_post_script.md5sumSeveral of these commands wrap to a second line; they must be typed as a single comma
18、nd line. The output for each command should be OK.ADS_Rekick_10_Kickstarting.docRe-kickstarting a NodeAn ADS node can be re-kickstarted in two ways. You can do so by mounting the ISO virtually using the DRAC (Dell Remote Access Card). You can burn a physical DVD with the ISO or mount the ISO virtual
19、ly using the DRAC.Use DVD burning software to burn the downloaded ISO to a DVD. Most ADS nodes do not have an internal DVD-ROM. Some ADS utility and data nodes do have internal DVD-ROMs.The kickstart procedure that follows reflects only the procedure generator option you selected.ADS_Rekick_20_KM_Ex
20、ternal_DVD.doc3:Externally Attached DVD-ROM16.Ensure the node is powered down.17.Attach a USB externally-attached DVD-ROM to the node.18.Connect a keyboard and monitor to the node.19.Power on the node.110.Insert the DVD created from the rekickstart ISO.111.Press F11 during boot up to open the BIOS b
21、oot menu.112.In the boot menu, select to boot from the externally-attached DVD-ROM.ADS_Rekick_30_Gen4_SingleDVDBootMenu.doc4:Single DVD Boot MenuThe following information applies to both methods of rekickstarting a node, externally attaching DVD-ROM and booting a virtual DVD-ROM using DRAC.After you
22、 have successfully booted from the single DVD, a variation of the following menu should be displayed.Figure1Gen4 Boot MenuUsing the down arrow, scroll down for more options:2Gen4 Boot menu additional optionsSLES kickstart is not complete until the first login prompt is available.113.Using the follow
23、ing table as a Gen4 guide, select the correct character identifier for your hardware platform and data partition configuration and press ENTER.The character identifier is the same for both single and multi-node types.For ADS nodes using an external DVD-ROM, use the following options:Node typeCharact
24、er identifierEMC Part NumberUtility NodeUtility Node ONLY100-580-616Accelerator NodeAccelerator100-580-621 or 100-580-6167.8 TB Storage NodeDell R510 7.8TB 6xRaid1100-580-6173.9 TB Storage NodeDell R710 3.9TB 3xRaid1100-580-618 2.6 TB Storage NodeDell R710 2.6TB 2xRaid1100-580-6191.3 TB Storage NodeDell R710 1.3TB 1xRaid1100-580-620The operating system installation procedure begins automatically.114.After the installation has completed, pre
copyright@ 2008-2022 冰豆网网站版权所有
经营许可证编号:鄂ICP备2022015515号-1