英语学习之路Word下载.docx

1、 The “Automatic Reposition” dialog is now available for 4-axis and live tooling machines. Added a check box to the primary rotary axis tab （Indexing section） that allows for the output of G0/G1 codes with ROTATE “Transformation Tab”; added a “Note” button for Simple Translations to explain some chan

2、ges of the DBLCOM values. Feedrates If Inverse time mode is NA and UPM and UPR are both available, added a new checkbox on the UPM tab called Output UPM mode for GOTO/xyz with rotary motion” （for mill only）. Time - added a View Note button to help explain the link between the functionality on this t

3、ab and the Maximum Feedrate data field on the Primary Rotary Axis tab Output Inv Time Feed for GOTO/cmd Rotary Motion: Added check box and accompanying combo box. Added “Verification Print in List File” section to the first tab. Cycle Motion Added a UG （Unigraphics） tab for reading UG drilling cycle

4、s.Spindle Spindle Codes - users can now specify how to output Spindle codes with the next motion block. Also rearranged the main Spindle tab and added the Aux Codes tab to hold the spindle related Aux Code fields. For lathe option files, the user can now specify whether the G97 code should be combin

5、ed with the S codeSFM R-Output when not in SPINDL/cmd: A combo box was added to the main Spindle panel （lathe only）. Machine Codes Updated the Coolant panel to include this check box to allow for the COOLANT/OFF command to be on a block by itself Updated the Tool Change panel; added a “Motion Analys

6、is Option for RAPID, GOTO/pt After LOADTL”.Start/End of Program Added a check box to the Program Number tab to allow for the skipping of initial blanks or slashes. Also added a “Use _OUTPT to edit MCD block” check box to the first tab in this functional group. Advanced The FIL and Text editor is now

7、 a separate dialog （e.g., not inside a panel）. The user can also select via the Utilities menu to use a different editor. PLABEL/Option 88: when equal “1”, the motion registers GXYZABCF are always output. In some cases, repeating the GF is not desired. Added a new setting for PLABEL/option 88 （value

8、 = 2） that allows only XYZABC to be output. Also made this update on the Machine Type “Specs” tab that uses PLABEL 88. On the “Commons”, added a “Save Value” button to allow user to edit a value, save it, go to a different value and save it, etc. Previously, if the user edited a common value and the

9、n changed to a different common, the value was not saved.File Formats Added “Input Printing Control” section to the List File panel.New Features REPOS Dialog - it is now possible to specify Secondary distance along toolaxis to approach in the Approach Motion section. for PCs updated the version from

10、 1.3.1 to 1.4.2. No changes made on UNIX machines. Slightly increased the size of the panels. Increased the length of the “Current Files” combo box and set its values such that the “machine number” is the first information listed. “Whats This Help” Added the capability to display help at the bottom

11、of the panel for items the user clicks on. Individual help files are now zipped up into a single Jar file. Added “Right Angled Head” as the 3rd sub-option of the Machine Tool Type functional group. This is a new panel for right angle head attachments.G-POST Added OP/THREAD command to GPost, A FIL so

12、lution is no longer needed. A new option has been added to output G83 cycle peck depth increment value （K-register） as a negative number.INTCOM（4653） controls sign of G83 K valueINTCOM（4653） = 0 Output K as programmed in CYCLE/cmd, DefaultINTCOM（4653） = 1 Output K as negative value. When auto REPOS

13、option is set, only the rotary axes were checked for correction. A new option has been added to check the XYZ axes limit also.INTCOM（4655） = 0 Do not check XYZ limit for REPOS, DefaultINTCOM（4655） =1 Yes, check XYZ limit for REPOSWhen INTCOM（4655） = 1 then if the rotary ABC is out of limit no furthe

14、r test will be done. If ABC axes pass the limit, then the GPost will check XYZ also. If XYZ is out of limit, it will select the opposite solution or call the _REPOS macro.In addition it will also set INTCOM（4656） to a value （24,25 or 26） to indicate the out of limit XYZ axis.INTCOM（4656） = 24-26, In

15、dicates out of limit linear XYZ axisNote: You must enable the REPOS option as before and set INTCOM（4655） flag in addition. Until now a ROTATE/cmd did not output any G-Code. A new option has been added to enable the G-code output.INTCOM（4657） = 0 Do not output G-code for ROTATE, DefaultINTCOM（4657）

16、= 1 Yes, Output G0 or G1 code for RAPID or FEDRAT This is controlled by an option to avoid problems with users who may have corrected ROTATE/cmd with a FIL solution. For a type-7 mill-turn machine, GOTO/cmd （move from x=1 to x=-1） with LINTOL/ON generated invalid output. Now three blocks will be out

17、put as G1 X0,G1 C180 and G1 X1. This is only done when LINTOL/ON is in effect. Current CIRCLE modeCIRCLE/cmds in UG-CLS files were converted to ARCDAT/ARCMOV only if they are in the XY-plane and also not in MULTAX mode.If they are not in XY-plane, then one mid-point was output to the ACL file before

18、 the ending GOTO/pnt. If your machine tool did not support circular mode G-codes （G2/G3）, then only one chordal point would be output by the GPost instead of an arc motion.New CIRCLE mode:Since ACL syntax now supports CIRCLE/in any plane, Wxpost8 will pass the CIRCLE/cmd （not in XY-plane） as is to t

19、he GPost and it will be processed correctly as an arc or a simulated linear motion. This is the default condition and we recommend this with V59.* USE BELOW REMARK ONLY IF YOU DO NOT WANT V59 CHANGES * BY DEFAULT WITH V59 NO CHANGE TO THE stb FILE IS NEEDED *However, there is an option to control th

20、is feature. You can add the REMARK command to the uncas8.stb file or edit into the CLS file.1. REMARK XPOST8 CIRCLE=OFFDisable circle, output one mid point as before for non-xy plane and output ARCDAT/ARCMOV for xy-plane.2. REMARK XPOST8 CIRCLE=ONEnable circle, for non-xy plane and ARCDAT/ARCMOV for

21、 xy-plane. This is the default condition now with V59.3. REMARK XPOST8 CIRCLE=ALLEnable circle, for all-xyz plane cases and do not output any ARCDAT/ARCMOV commandsPS: The new CIRCLE/option only applies to UG-CLS interface and not for UG-APT interface A blank character is output after each tape addr

22、ess when INTCOM（1831） = 2. In this case, the operator message block did not output a if the 1st char of the PPRINT is also a blank character. This has been corrected. For large FIL files, the ISN was printed as * in the list file. This has been corrected. UNIX Version Only: Some large FIL programs m

23、ay fail or process very slow due to overflow of the CANON table. This table size has been increased to avoid such overflow condition.NOTE: The PC version uses a different scheme and does not need any update or table expansion. When large number of MCD blocks are simulated, via INSERT/commands, the s

24、equence number （N） is skipped and output sometimes. This has been corrected. During an ARCFIT with ARCSLP/ON, sometimes, arc motion is not around the original input points. This has been fixed. When input print is turned, CYCLE/DEEPCL was printed as CYCLE/INCHES in the list file. This has been corre

25、cted. During an ARCFIT, sometimes, 3-points are not output. This has been corrected. A new INTCOM（4662） location has been added to always output M-code for COOLNT/OFF in a block by itself. The other choice is to use the same setting used by COOLNT/ON-MIST-FLOOD etc, which can be set to output with t

26、he next motion block. I4662=0 Use same COOLNT/ON setting for COOLNT/OFF I4662=1 Output COOLNT/OFF code in a block by itself Added new option, to Cycle Motion panel, both Lathe/Mill. Option to process UG form of CYCLE/DRILL,DEEP-TAP cmdINTCOM（4660） = 0 FIL will process UG CY/cmd, DefaultINTCOM（4660）

27、= 1 GPost to process UG CY/cmd UG cycle commands are generated with a double coupletform of CYCLE/DRILL,DEEP or some parameters are changed using CYCLE/ON,FEDTO,z commands. The above option allows you to process them in FIL with your custom code or handled in the GPost.We recommend the GPost option

28、as the other one is supplied for compatibility with earlier FIL programs before the CYCLE/cmd was added to the GPost.A new option has been added to print verification feed rate values in IPM or IPR units in the list file.INTCOM（4659） can be set as follows: = 0 Print in IPM, Default = 1 Print in IPR

29、= 2 Print in IPM or IPR per current mode A new option has been added to control input statement printing in the list file.When PLABEL/OPTION,87=1, the input commands are printed before the MCD block in the list file. A new flag INTCOM（4658） will provide further control as to which type of commands t

30、o print. It is a 4-digit field to be set as no=0 or yes=1 for each option below: Default=0000 to print all commands as before. Skip printing of FIL generated commands （1st digit） Skip printing of PPRINT text commands （2nd digit） Skip printing of INSERT text commands （3rd digit） Skip printing of PARTNO text commands