分享Testinside最新000238认证考试题库资源Word下载.docx

1、A. POWER5 supports multiple operating systems.B. POWER5 supports more nodes in a clustered environment.C. POWER5 hypervisor has significantly less overhead than hardware partitioning.D. POWER5 has greater granularity of resources such as memory, processors and I/O.Answer: D2. Which of the following

2、support dynamic LPAR?A. AIX v5.1B. AIX v4.3.3C. SuSe Linux Enterprise Server 9 （SLES9）D. SuSe Linux Enterprise Server 8 （SLES8） C3. A customer has two different applications, each requiring two processors. They are evaluating the following three alternatives:1） Two p5-520s each with two processors a

3、nd 4GB memory 2） One partitioned p5-550 with four processors and 8GB memory 3） One partitioned p5-570 with four processors and 8GB memory All three solutions will work. However, when helping the customer decide which solution is best for their environment, the pSeries technical specialist should con

4、vey which of the following pieces of information?A. Solutions 2 and 3 allow for processor and memory CoD; however, both solutions require an HMC.B. Solutions 2 and 3 allow for sharing of physical resources when AIX 5.3 is implemented;C. All three solutions allow for sharing of physical resources whe

5、n AIX 5.3 is implemented; however, solutions 2 and 3 require an HMC.D. All three solutions allow for processor and memory CoD; B4. A customer needs a very small AIX system to run their new application and is considering a 1-way p615. What key information should the pSeries technical specialist provi

6、de to the customer?A. The 1-way p615 cannot be upgraded to a 2-way p615.B. The 1-way p615 can be upgraded to a 2-way p615 should additional capacity be required.C. The p615 can be upgraded to a POWER5-based processor.D. The p615 is not a good solution, as it does not take advantage of the Advanced P

7、OWER Virtualization features. A5. A customer is debating whether to use Shared Ethernet versus Virtual Ethernet. Which of the following best describes a key difference between Shared and Virtual Ethernet?A. Shared Ethernet runs on POWER4 systemsB. Virtual Ethernet runs on POWER4 systemsC. Shared Eth

8、ernet requires a Virtual I/O server and Advanced Power VirtualizationD. Virtual Ethernet requires a Virtual I/O server and Advanced Power Virtualization6. A p5-570 8-way 32GB system has been proposed to a customer as a new test system with four LPARs. The current applications are certified on AIX 5.

9、2 but not yet on AIX 5.3. The customer wants to understand the advantages and disadvantages of this solution versus a pair of 4-way p5-550s with 16GB each in testing their current applications. Which of the following points should the pSeries technical specialist highlight?A. The p5-570 would save r

10、ack space over a pair of p5-550 servers.B. The p5-570 allows for more CPU and memory resources to be dynamically allocated to any LPAR for performance testing.C. The p5-570 can only be upgraded to 64GB of RAM without replacing memory.D. The p5-570 supports advanced features such as Micro-Partitionin

11、g and Virtual I/O allowing more LPARs of the customers applications with fewer processors and fewer I/O adapters.7. The account team designed a p5-570 solution to strategically position the customer for future IBM announcements. The customer was dissatisfied upon implementing the solution. An AIX v5

12、.1 partition was added to the requirements halfway through the solution design process and it was not considered in the final design. What should the pSeries technical specialist have done to prevent this situation?A. Submitted an RPQ （Request for Quote） for AIX v5.1 support on a p5-570B. Designed a

13、 p670 because it supports AIX 5.1 partitionsC. Initially designed a solution supporting AIX 5.1 partitionsD. Gained customer approval for the final design prior to ordering the system8. After months of negotiations and several proposals, the customer indicates that they may be ready to purchase a pS

14、eries system. Rather than quickly ordering the last configuration proposed, what is the most appropriate next step for a pSeries technical specialist to improve the chance of a successful project?A. Obtain buy-in and feedback from the customer.B. First ask the client executive if financing has been

15、arranged.C. Plan the installation and rollout schedule before ordering.D. Confirm that any additional requirements are handled by others.9. A customer is evaluating the purchase of a new p570 8-way Express to replace their current set of ten 2-way database and application servers that are more than

16、five years old. In addition to savings potential in the areas of operating system and database charges, what other significant savings component should be highlighted?A. Maintenance savings due to warranty on new machinesB. Reliability savings of using one machine versus tenC. Financial savings due

17、to cash outlays now versus laterD. Power savings even if the current power usage is unknown10. Which of the following best describes Simultaneous Multi-threading （SMT）?A. A POWER5 microprocessor feature that allocates two processors to each applicationB. A Workload Manager feature that allows two pr

18、ocessing threads to be executing on a single processorC. An AIX v5.2 feature that allows two processing threads to be executing on a single processor concurrentlyD. A POWER5 microprocessor feature that allows two processing threads to be executing on a single processor concurrently11. Which of the f

19、ollowing is a key advantage of AIX v5.3 over AIX v5.2?A. Dynamic LPARB. Micro-PartitioningC. Small Memory Real ModeD. Capacity Upgrade on demand for memory12. A customer is putting together a high-performance computing cluster of p655 nodes. They need a total of 48 processors and want to get the bes

20、t performance possible out of those systems. They are evaluating four options and have asked the pSeries technical specialist to recommend which one would provide the best performance based on total rPerf. Their workload may grow over time. Which of the following should the pSeries technical special

21、ist recommend?A. Twelve 4-way p655 nodes and add more as neededB. Six 8-way p655 nodes and add more as neededC. Six 4-way p655 nodes with four processors CoD on each node in case of growthD. Three 8-way p655 nodes with eight processors CoD on each node in case of growth13. A customer is running Orac

22、le on a Sun server and requires an upgrade to improve performance. What competitive issues are appropriate in positioning pSeries server performance versus Sun for this customer?A. POWER5-based systems can run Oracle on version 8 of SuSe Linux while Sun systems cannot.B. The pSeries systems require

23、fewer processors to provide the same level of performance, reducing total cost of ownership.C. POWER5-based systems can optionally be configured with a Virtual I/O server to reduce the number of IO adapters required.D. A single pSeries system can be configured with multiple LPARs running Oracle RAC,

24、 improving availability without using separate systems.14. A customer had been given a proposal for a p5-570 6-way 32GB system running in Full Partition mode. After review, the customer asked that the configuration be modified to enhance the reliability and availability of the solution. However, the

25、 customer does not want to pay for HACMP or additional machines. What change would be most likely to improve the reliability of the solution?A. Add CUoD memory.B. Provide CUoD processors.C. Provide redundant disks on separate SCSI buses.D. Add redundant power supplies in the p5-570 CEC （Central Elec

26、tronics Complex）.15. A customer has ordered a rack, a p650, two p630s, and two p615s. During a conversation on installation planning, the pSeries technical specialist recognizes that the customer expects the rack to arrive as one unit. However, the specialist knows that the p650 will be racked, but

27、the other systems will arrive separately. In fact, the other systems are CSU （Customer Set Up）. Why should the specialist immediately inform the customer that additional racking is the customers responsibility?A. Because additional systems would require more power receptaclesB. Because the customer

28、may need to do additional facilities planningC. Because the customer needs additional funding to cover the servicesD. Because postponing the eventual discussion will likely lead to customer dissatisfaction16. The account executive is asking about post-sales support for a new p5 HMC. They need the pS

29、eries technical specialist to configure an HMC with software support for the customer. Which of the following should the specialist include in the configuration?A. SupportlineB. ServiceSuiteC. Software Maintenance Agreement （SWMA）D. Machine Control Program Remote Support Agreement （MCPRSA）17. A pSer

30、ies technical specialist has just returned from an internal course for implementing Micro-Partitioning on the POWER5 range of servers. There were many handouts from the course. To ensure the rapid transfer of the newly acquired skill, what should the technical specialist do?A. Make copies of the cou

31、rse material and deliver the course in full to the technical team.B. Make copies of the course material and hand them out to the technical team for them to read.C. Become the Micro-Partitioning expert within the organization and act as the sole knowledge base.D. Make copies of the course material and prepare a concise overview of the course to deliver to the