ASHRAE手册第19章 数据处理和电信设施Word文件下载.docx

1、19.6 其它系统和注意事项DATACOM （data processing and telecommunications） facilities are predominantly occupied by computers, networking equipment, electronic equipment, and peripherals. The most defining HVAC characteristic of data and communications equipment centers is the potential for exceptionally high s

2、ensible heat loads （often orders of magnitude greater than a typical office building）. In addition, the equipment installed in these facilities typically:数据通信（数据处理和电信）设施主要由计算机、网络设备、电子设备和其它辅助设备组成。数据和通讯设备中心空调最主要的特征是，需要应对极高的显热冷负荷（要比普通的商业办公楼负荷大得多）。另外，空调系统要具有以下这些功能：.Serves mission-critical applications （

3、i.e., continuous operation）.Has special environmental requirements （temperature, humidity, and cleanliness）.Has the potential for disruptive overheating and equipment failure caused by loss of cooling满足特定的应用（例如：持续运行）；具备特殊环境要求（温度、湿度和洁净度）；在突发性过热和由于设备损坏不能持续制冷的情况下，系统能继续冷却电子设备。 Design of any datacom faci

4、lity should also address the fact that most datacom equipment will be replaced multiple times with more current technology during the life of the facility. As described in Datacom Equipment Power Trends and Cooling applications （ASHRAE 2005a）, typical datacom equipment product cycles are 1 to 5 year

5、s, whereas facilities and infrastructure HAVC life cycles of 10 to 25 years. Replacement equipment has historically required more demanding power and cooling requirements.任何数据通信设施的设计时，都要面对这样一个事实：在通信设施的使用寿命期间，随着技术的发展，大量现有的通信设备将会被将来的新设备更换掉。在数据通信设备电源的发展过程和冷却应用中（ASHRAE 2005a），典型的数据通讯设备产品寿命为1至5年，而空调设施和基础

6、设施的寿命为10年至25年。新设备对电功和制冷量要求的会更大。 Understanding these critical parameters is essential to datacom facility design.了解这些关键因素对数据通信设施的设计是必不可少的。The preparation of this chapter is assigned to TE 9.9, Mission-critical Facilities, Technology Spaces, and Electronic Equipment.由ASHRAE中负责“重要设施、工艺房间与电子设备”的技术委员会TC9

7、.9编著。Types of datacom （ASHRAE 2005a） equipment that require air conditioning to maintain proper environmental conditions include数据通信中心（ASHRAE 2005a）的空调系统的工作环境中，包含的数据通信设备类别有：Computer servers （2U and greater）Computer servers （1U, blade, and custom）Communication （High-density）Communication （Extreme-den

8、sity）tape storageStorage serversWork stations （standalone）Other rack- and cabinet-mounted equipment服务器（2台或更多）服务器（1台, black, and custom）通讯（高密度）通讯（超高密度）磁带存储器存储服务器工作站（独立）其它机架和机柜安装设备Personnel also occupy datacom facilities, but their occupancy is typically transient and environmental conditions （e.g., t

9、emperature, noise） are more typically dictated by equipment needs. However, human occupancy in smaller datacom facilities may influence the ventilation air quantity. A data center is a building or portion of a building whose primary function is to house a computer room and its support areas; data ce

10、nters typically contain high-end servers and storage products with mission-critical functions. Personnel also occupy datacom facilities, but their occupancy is typically transient and environmental conditions are usually more dictated by equipment needs, thereby making it more of a process cooling a

11、pplication rather than comfort cooling. However, human occupancy in smaller datacom facilities may influence ventilation air requirements.工作人员也占用数据通信中心，但其通常是暂时的，所以机房环境条件（如温度，噪音）常由设备的需求决定。虽然工作人员占用的数据通信机房较小，但通风量也会受影响。数据中心可能一个建筑物或建筑物的一部分，其主要功能是容纳一个计算机房和其他附属设施；数据中心通常包含高端服务器和具有重要功能的存储设备。工作人员也占用数据通信中心，但其通

12、常是暂时的，所以机房环境条件（如温度，噪音）常由设备的需求决定，因此空调系统更多的是冷却功能而不是舒适功能。虽然工作人员占用的数据通信机房较小，但对通风设计也会有要求。Overview19.1.1 概述Environmental requirements of datacom equipment vary depending on the type of equipment and/or manufacturer. However, a consortium of server manufacturers has agreed on a set of four standardized con

13、ditions （Classes 1 to 4）, listed in Thermal Guidelines for Data Processing Environments （ASHRAE 2008）. A fifth classification, the Network Equipment-Building Systems （NEBS） class, is typically used in telecommunications.不同类型的设备或制造商，他们的数据通信设备对环境的要求都有所不同。然而，服务器制造厂家们达成了四个标准原则，此四条标准原则列于数据中心冷却指南（Thermal

14、Guidelines for Data Processing Environments ASHRAE 2008）。第五个分类，网络设备构建系统（NEBS）类，通常用于通信。Class 1: typically a datacom facility with tightly controlled environmental parameters （dew point, temperature, and relative humidity） and mission-critical operations; types of products typically designed for these

15、 environments are enterprise servers and storage products.第一类：通常数据通信设施有严格控制环境参数（露点，温度和相对湿度）和重要操作; 通信设备服务器和存储设备一般按照此条规定的环境参数设计。Class 2: typically a datacom space or office or lab environment with some control of environmental parameters （dew point, temperature, and relative humidity）; types of produc

16、ts typically designed for this environment are small servers, storage products, personal computers, and workstations.第二类：通常数据通信机房或办公室或实验室环境中，会安装有环境参数控制设备（露点温度、温度和相对湿度）；小型服务器、存储设备、个人电脑和工作站一般按照此条规定的环境参数设计。Class 3: typically an office, home, or transportable environment with little control of environme

17、ntal parameters （temperature only）; types of products typically designed for this environment are personal computers, workstations, laptops, and printers.第三类：通常办公室、家庭或者运输环境只需要控制环境温度（温度）；个人电脑、工作站、笔记本电脑和打印机一般按照此条规定的环境参数设计。Class 4: typically a point-of-sale or light industrial or factory environment wi

18、th weather protection, sufficient winter heating, and ventilation; types of products typically designed for this environment are point-of-sale equipment, industrial controllers, or computers and handheld electronics such as PDAs.第四类：通常销售点或轻工业或工厂，需要有冬季采暖和通风条件。设备销售点、工业控制器、计算机和手持式电子设备如掌上电脑（PDAs）一般按照此条规

19、定的环境参数设计。.NEBS: per Telcordia （2001, 2006）, and typically a telecommunications central office with some control of environmental parameters （dew point, temperature and relative humidity）; types of products typically designed for this environment are switches, transport equipment, and routers.NEBS（网络

20、设备构建系统）:根据Telcordia（2001, 2006）规定，通常电信中心需要有环境控制装置（露点，温度和相对湿度）；交换机、传输设备和路由器一般按照此条规定的环境参数设计。 Because Class 3 and 4 environments are not designed primarily for datacom equipment, they are not covered further in this chapter; refer to ASHRAEs （2008） Thermal Guidelines for Data Center environments for fu

21、rther information.由于第三和第四条不以数据通信设备为主，将不在下面章节中讨论。如想了解更多信息请参考数据中心冷却指南（Thermal Guidelines for Data Processing Environments ASHRAE 2008）。Environmental Specifications19.1.2 环境说明 Table 1 lists recommend and allowable conditions for Class 1, Class 2, and NEBS environments, as defined by the footnoted sourc

22、es. Figure 1 A shows recommended temperature and humidity conditions for these classes on a psychrometric chart, and Figure 1 B shows allowable temperature and humidity conditions. Note that dew-point temperature and relative humidity are also specified.表1列出了一类、二类和NEBS的建议和允许环境要求，详细介绍见脚注。图1A中，在焓湿图上给出

23、了这两类推荐的环境要求；图1B中，在焓湿图上给出了这两类允许的环境要求。请注意，露点温度和相对湿度也已给出。图 1A 数据中心Class 1、 Class 2和 NEBS推荐的环境参数表1 数据中心Class 1、 Class 2和 NEBS设计参数a. Inlet conditions recommended in ASHRAE （2008）. a. ASHRAE （2008）推荐送风温度；b. Percentage values per ASHRAE Standard 52. 1 dust spot efficiency test. MERV values per ASHRAE Stand

24、ard 52.2b. 平均值按照ASHRAE标准52.1除尘点效率测试，MERV（Minimum Efficiency Reporting Value）值按照ASHRAE标准52.2c. Telcordia （2006）.d. Telcordia （2001）.e. Generally accepted telecommunications practice. Telecommunications central offices are not generally humidified, but personnel are often grounded to reduce electrosta

25、tic discharge （ESD）e. 通信行业常规做法。通信中心通常不需要加湿，但人员需要经常接地，以减少静电放电（ESD, Electro-Static discharge）f. See Figure 2 for temperature derating with altitudef. 见图2温度梯级 Air density also affects the ability of datacom equipment to be adequately cooled. ASHRAEs （2008） Thermal Guidelines for Data Processing Environ

26、ments suggests that data center products be designed to operate up to 3050 m altitude, but recognizes that there is reduced mass flow and convective heat transfer associated with lower air density at higher elevations. To account for this effect, the guideline includes a derating chart for the maxim

27、um allowable temperature of 1 K per 300 m altitude above 900 m （Classes 1 to 4）. Figure 2 shows the altitude derating recommended by ASHRAE （2004） for Classes 1 and 2, and for NEBS.空气的密度也会影响数据通信设备的冷却效果。ASHRAE （2008） 数据中心冷却指南（Thermal Guidelines for Data Processing Environments ASHRAE 2008）指出，数据中心设备工作

28、环境的海拔高度不要超过3050m，同时也指出，随着海拔高度的增加，空气的密度逐渐降低，对空气的质量流量和设备的对流换热有一定的影响。考虑到这些因素，数据中心冷却指南给出了一张阶梯图，在海拔900m以上，每升高300m，设备的最大允许温度下降1（1至4类）。ASHRAE （2004）给出，随着海拔高度的增加1类、2类和NEBS的工作环境温度范围。The stated environmental conditions are as measured at the inlet to the data and communications equipment, and not average spac

29、e or return air conditions.规定的测试条件是：以数据通信设备的进口作为参考点，而不是机房内平均温度或者回风温度。Temperature19.1.3 温度 The allowable temperature range is a statement of functionality, whereas the recommended range is a statement of reliability. Thus, equipment exposed to prolonged high temperatures （and/or to steep temperature

30、gradients） can experience increased failure rates, reduced service life, hardware and/or software failures, and/or thermal shutdown. Exceeding the recommended limits for short periods of time should not be a problem, but running near the allowable limits for months could result in increased reliabil

31、ity issues. Facility designers and operators should strive for continuous operation in the recommended range. ASHRAE （2008） and Telcordia （2001） recommended range is 18 to 27.尽管建议的设备的允许温度范围是可靠的，但它只是一个功能说明。因此，当设备长期暴露在高温环境下（温度波动频率或幅度大），就会提高设备的故障率，降低设备使用寿命，硬件/软件故障率提高，传热性能下降。短时间超过允许温度范围不会对设备造成影响，但如果几个月一直在接近温度范围边界运行，设备的上述问题出现的概率会提高。设计师和管理者都应该努力使设备在允许温度区间内运行。ASHRAE （2008） 和Telcordia （2001）推荐的温度范围是18到27。Fig. 1B Allowable Data Center Class 1, Class 2, and NEBS Operating Condit