模具零件的材料及热处理.docx

1、模具零件的材料及热处理4.1模胚组板类别东江标准名称使用材料/供应商备注模 胚 组 件模胚 mold baseh.k.上码模板 top clamp plates50c, s55c,1050, 1055，p20，1.2311热流道框板 spacer plates50c, s55c,1050, 1055水口板 runner stripper plates50c, s55c,1050, 1055“a”板 “a” plates50c,1050,1055,718,718h,738, 738h,p20,m202,m238, m300, m310, m310h, gs2311, gs2312, px88,

2、mup，p20，1.2311推板 stripper plates50c,1050, 718,738,p20,m202“b”板 “b” plates50c, s55c,1050, 1055，p20，1.2311“b1”板 “b1” plates50c, s55c,1050, 1055“b2”板 “b2” plates50c, s55c,1050, 1055托板 support plates50c, s55c,1050, 1055凳仔方 spacer blocks50c, s55c,1050,1055,顶针板 ejector plates50c, s55c,1050, 1055，p20，1.231

3、1顶针托板 ejector retainer plates50c, s55c,1050, 1055，p20，1.2311下码模板 bottom clamp plates50c, s55c,1050, 1055，p20，1.2311回针 return pinstd,dme,dme eqv,hasco,hasco eqv，daido边钉 guide pinstd,dme,dme eqv,hasco,hasco eqv，daido边司guide bushstd,dme,dme eqv,hasco,hasco eqv，daido哥林柱ejector guide pinstd,dme,dme eqv,h

4、asco,hasco eqv，daido中托司 ejector guide bushstd,dme,dme eqv,hasco,hasco eqv，daido4.1模胚组板类别东江标准名称使用材料/供应商备注模 胚 组 件水口边support pinstd,dme,dme eqv,hasco,hasco eqv，daido直司straight guide bushstd,dme,dme eqv,hasco,hasco eqv，daido托边shoulder guide pinstd,dme,dme eqv,hasco,hasco eqv，daido4.2成型件类别东江标准名称使用材料/供应商备

5、注成 型 件上模肉cavity insert下模肉 core insert上模镶件cavity small insert下模镶件core small insert行位slide block行位镶件slide insert可换镶件exchangeable insert水口镶件runner insert斜顶镶件cam insertassab: 718,718h,s136h,s7,s136, 635,8407,618german: gs711, gs638,gs738, gs767, gs2311,gs2312, gs2083, gs2083h,gs2316, gs2344 esr,gs2344 e

6、fs, gs307,gs316, gs316 esrbohler: m202,m238, m300, m310, m310h,m461daido:nak55,nak80,pak90,px88,pds3,skd11,skd61,dh2fp20, 738h,mup, h13, pm35,420,420h , sm.v3, becu max30 (铍铜)，becu max40(铍铜)，ampco940(合金铜)s136, 8407,:gs2083 esr, gs2344, h13:淬火后二次回火，硬度hrc4852hardened，hrc 4852gs2083 var, 420: 淬火后二次回火，硬

7、度hrc5256hardened，hrc 5256氮化0.15深，硬度hrc 6870nitrided 0.15dep，hrc 6870上模镶针cavity insert pin下模镶针core insert pin行位镶针slide insert pin斜顶镶针cam insert pinstd,dme,dme eqv,hasco,hasco eqv,rabourdin,daido,daido eqv,正钢puch,misumi采用标准顶针改做上模肉压块cavity clamp下模肉压块core clamps50c, 1050, p20日期镶针date indicator环保镶针recycl

8、e marked pinstd,dme,dme eqv,hasco,hasco eqv,daido,daido eqv,puch,misumi哥针core pindaido, daido eqv,dme,dme eqv疏气针gas expellerdaido4.3浇注系统类别东江标准名称使用材料/供应商备注浇注系统法兰 locating rings50c,1050唧咀 sprue bushing法兰唧咀 sprue bushing locating唧咀头 sprue gates50c,1050,420,o1，p20s50c,1050:渗碳0.3深，硬度hrc 5256carburized 0.

9、3dep，hrc 5256o1: 淬火后二次回火，硬度hrc5256hardened，hrc 5256加长唧咀 extend sprue bushing浇口套gate bush420唧咀身 sprue bodys50c,1050,420,becu max40,o1s50c,1050:渗碳0.3深，硬度hrc 5256carburized 0.3dep，hrc 5256o1: 淬火后二次回火，硬度hrc5256hardened，hrc 5256唧咀套 sprue bushs50c铁管steel pipes50c4.4发热元件、热流道系统类别东江标准名称使用材料/供应商备注发热元件、热流道系统钢“

10、o”令 steel o-ringdme热流道板 hot manifold420,dme,隔热板 high temp. insulator sheetdme,hasco隔热垫 riser pad420,dme,hasco,mold-master,yudo中心垫 center support pad420,dme,hasco,mold-master,yudo阀针系统valve gate systemdme,hasco,mold-master,yudo热唧咀 heater nozzledme,hasco,mold-master,yudo热唧咀定位套nozzle bushdme,hasco,mold-

11、master,yudo热唧咀头 heater sprue gatedme,hasco,mold-master,yudo封针closed pindme,hasco,mold-master,yudo封针衬套 closed pin banddme,hasco,mold-master,yudo发热圈 band heaterdme发热片 heater sheetdme热电偶 thermocoupledme延长咀头extend nozzle发热壳 heater shelldme唧咀隔热套 gate shell insulatorhasco，yudo，dme发热管 manifold heaterdme发热管

12、尾塞heater pullerdme4.4发热元件、热流道系统类别东江标准名称使用材料/供应商备注发热元件、热流道系统流道尾塞end plug420,dme发热管压块 heater clamps50c冷却套 cooling bushmold-master背板 back platemold-master温控器 temp. control moduledme,mold-master,yudo,hasco温控箱 main framedme,mold-master,yudo,hasco接线盒 terminal mounting boxhating,dme,mold-master,yudo,hasco电

13、源线 power cablestd电缆 mold power-thermocouple cablestd电源/电偶接头 power/signal adapterstd电源/电偶插座 power/signal connectorstd保温铝板reflector sheethasco热流道板附件accessory kithasco热唧咀过滤器filter cartridgehasco4.5脱模构件类别东江标准名称使用材料/供应商备注脱模构件行位压片 gibo1淬火后二次回火，硬度hrc5256hardened，hrc 5256铲基wedgep20,s50c,1050，01s50c,1050:渗碳0.3深，硬度hrc 5256carburized 0.3dep，hrc 525601：淬火后二次回火，硬度hrc5256hardened，hrc 5256p20: 氮化0.15深，硬度hrc 6870