FURUNO电子海图完整题库.docx

1、FURUNO电子海图完整题库1.What does the alert number 820 indicate?A. AIS lostB. TT lostC. Navtex message receivedD. Cross track alarm2. What does the alert number 450 indicate?A. Route: Illegal To WPTB. RADAR comm. Error C. LAN adapter version error D. Heading sensor not available3. What does the alert number

2、 495 indicate? A. Anchor watch errorB. Track control stopped C. Steering parameter error D. Filter: Init. 4. What does the alert number 380 indicate? A. Route: File read errorB. User chart: File not foundC. AIS COM errorD. User chart: File read error5. What does the alert number 635 indicate? A. No

3、official data B. Log error C. Dual axis log (WT) errorD. Dual axis log (BT) error6. What does the alert number 640 indicate?A. Datum mismatch B. Chart align: Over 30 min.C. RADAR antenna ID errorD. Gyro error (Trackpilot)7. What does the alert number 031 indicate?A. Sensor adapter 1 COM timeoutB. Se

4、nsor adapter 2 COM timeoutC. Sensor adapter 3 COM timeoutD. Sensor adapter 4 COM timeout 8. What does the alert number 257 indicate?A. Heading sensor not availableB. Prg track: Need higher speedC. Prg track: Use radius CtrlD. Gyro 3 COM error9. What does the alert number 470 indicate? A. WGS 84 not

5、usedB. Different geodetic datumC. Sentence syntax errorD. Datum change10. Where do you control the settings and visibility of the chart layers?A. In Chart LegendB. In Symbol DisplayC. In Chart DisplayD. In Basic Setting 11. Where do you set the Safety Depth?A. In Chart Legend B. In Symbol DisplayC.

6、In Chart AlertD. In Chart Display12. Where do you set the Shallow Contour?A. In Chart LegendB. In Symbol DisplayC. In Chart AlertD. In Chart Display13.Where do you set the Deep Contour?A. In Chart LegendB. In Symbol DisplayC. In Chart AlertD. In Chart Display14.Where do you set the Safety Contour?A.

7、 In Chart LegendB. In Symbol DisplayC. In Chart AlertD. In Chart Display15. Where do you set the Shallow Pattern?A. In Chart DisplayB. In Symbol DisplayC. In Basic SettingD. In Chart Catalogue16. Where do you control the AIO?A. In Chart LegendB. In Symbol DisplayC. In Chart DisplayD. In Chart Catalo

8、gue17.Where do you select the color Palette used to display the charts?A. In Chart LegendB. In Chart DisplayC. In Quick Access BarD. In Chart Catalogue18. Where do you switch between Multicolor and Two Color settings for the charts?A. In Chart LegendB. In Symbol DisplayC. In Basic SettingD. In Chart

9、 Display19. When an ENC is outlined in Green in the Chart Catalogue - it means?A. License is valid - chart is up-to-date.B. License is valid - chart is NOT up-to-date.C. License is available - chart not installed.D. License is not available or has expired.20. When an ENC is outlined in Orange in the

10、 Chart Catalogue - it means?A. License is valid - chart is up-to-date.B. License is valid - chart is NOT up-to-date.C. License is available - chart not installed.D. Cancelled chart.21. When an ENC is outlined in Magenta in the Chart Catalogue - it means?A. License is valid - chart is up-to-date.B. L

11、icense is valid - chart is NOT up-to-dateC. License is available - chart not installedD. License is valid - up-to-date status doubtful.22. When an ENC is outlined in Yellow in the Chart Catalogue - it means?A. License is valid - chart is NOT up-to-date.B. License is available - chart not installed.C

12、. License is valid - up-to-date status doubtful.D. License is not available or has expired.23. When an ENC is outlined in Red in the Chart Catalogue - it means?A. License is valid - chart is NOT up-to-date.B. License is available - chart not installed.C. License is valid - up-to-date status doubtful

13、.D. License is not available or has expired24. When an ENC is outlined in Blue in the Chart Catalogue - it means?A. License is valid - chart is up-to-date.B. License is valid - chart is NOT up-to-date.C. License is available - chart not installed.D. Cancelled chart.25. Where can you find information

14、 concerning the charts stored on the HDD?A. On the Internet.B. The Chief Officer will know.C. In the chart catalogue.D. In the Chart Display menu.26. How can you tell if your FURUNO ECDIS is displaying an ENC?A. There is an ENC Data available indication in the Own Ship Functions Box.B. There is an R

15、NC data indication in the Own Ship Functions Box.C. The FURUNO ECDIS will give an audible alarm if I am not viewing an ENC.D. There is no special indication in the Own Ship Functions Box.27. Where do you find information on Magnetic Variation in the ENCs on the FURUNO ECDIS?A. In Chart DisplayB In C

16、hart CatalogueC In Chart AlertD In Chart Legend28. Which information can you find in the Vector Chart Legend?A Magnetic VariationB Base CD numberC Permit expiration dateD Safety Contour setting29. Which information can you find in the Vector Chart Legend?A T&P NoticesB NameC WarningsD Safety Contour

17、 setting30. Which information can you find in the Vector Chart Legend?A Notices To MarinersB Presentation Library edition numberC Chart edition & Update dateD Safety Contour setting31. Which information can you find in the Raster Chart Legend?A Magnetic VariationB Safety Contour settingC Quality of

18、dataD T&P Notice32.Which information can you find in the Raster Chart Legend?A Horizontal datumB Safety DepthC User Permit numberD License number33. Which information can you find in the Raster Chart Legend?A Shallow ContourB Chart NameC Chart Viewing dateD Deep Contour34. Which information can you

19、find in the Raster Chart Legend?A Edition numberB Last displayed updateC Edition dateD Update issue date35. How do you switch from Vector chart to Raster chart on the FURUNO ECDIS?A I select Raster chart in the Main menu.B I select RNC in the Chart Legend.C I select Raster chart from the drop down l

20、ist in the Status Bar.D I select RNC in the Chart Catalogue.36. How do you switch from Raster chart to Vector chart on the FURUNO ECDIS?A I select ENC in the Main menu.B I select Vector chart in the Chart Legend.C I select Vector chart from the drop down list in the Status Bar.D I select Vector char

21、t in the Chart Catalogue.37.How do you get information on an ENC object (Buoy - Beacon - Berth etc.) on the FURUNO ECDIS?A I right click on the User Chart function in the route planning tool.B I click on the Chart Info in the Instant Access Bar.C I center click on the object.D I right click on the o

22、bject.38 How do you record Own Ships position on the ECDIS charts when you have a Range/Bearing observation from your RADAR?A I cannot record own ships position manually on the FURUNO ECDIS.B I record LOP in the Record function of the Event Log.C I press the CTRL & ACQ/ACT button on the Control Unit

23、.D I select RecordEvent Log and User Event from the Instant Access bar and insert the observation in the Record User Event window.b39 Which operation can you perform on the FURUNO ECDIS?A I can record target ships positions in the Voyage log automatically.B I can record a position fix manually by us

24、ing just one distance and one bearing.C I can playback my past voyage track on the charts.D I can send my Route Plan and User Chart and Notes to a FURUNO GPS for display on the GPS.40 Which operation can you perform on the FURUNO ECDIS?A I can record my position manually on the ENCs.B I can set the

25、ECDIS to automatically choosing a Safety Contour based on my setting of Ships maximum draft.C I can set Ships maximum height to enable chart alerts from areas in the charts where there is not sufficient air draft.D I can send a copy of my Route Plan to an AIS target as a Safety Message.41 Which oper

26、ation can you perform on the FURUNO ECDIS?A I can play back my ships past track on the ECDIS.B I can record my position manually on the RNCs.C I can create Notes from my Voyage Log to document a voyage on the charts.D I can set the ECDIS to include engine log information into the Voyage log automati

27、cally.b142 How do you document your previous voyage on the FURUNO ECDIS?A I use my paper Logbook as documentation.B I use my paper Logbook and my VDR or SVDR as documentation.C I use the tracking function in the symbol display.D I show a playback of my past voyage track on the charts.43 Which operat

28、ion can you perform during a voyage?A I can use the Event function to record special events in the Event Log.B I can create a User Chart from the Alert Log and save it to a USB memory device.C I can create a User Chart from the Chart Usage Log and save it to a USB memory device.D I can create a User

29、 Chart from the Voyage Log and save it to a USB memory device.44 Which operation can you perform during a voyage or after completion of a voyage?A I can use the Event function to record special events in the Details Log.B I can view and print a copy of the Voyage Log.C I can create a backup copy of

30、Own Ships past track (120 minutes max.) on a USB memory device and keep the copy in a safe location for future reference.D I can reset the Chart Usage Log after creating a backup copy.45 Which operation can you perform during a voyage or after completion of a voyage?A I can use the Record function t

31、o record special events in the Voyage Log.B I can create and save a screen shot for future reference.C I can view and print a copy of the Details Log.D I can connect the ECDIS to the Internet and upload all documentation to an external storage.46 Which operation can you perform after completion of a voyage?A I can add additional records of manual positions to the Voyage Log adding further detail to the past Voyage.B I can create a User Chart from the monitored Route Plan and save it to