诱导轮一维设计模式流程x.pptx

1、The material contained herein is proprietary and confidential.2013 Concepts ETI,Inc.All rights reserved.,1,诱导轮一维设计模式流程,黄洪磊,一、进入Pumpal向导模式,The material contained herein is proprietary and confidential.2013 Concepts ETI,Inc.All rights reserved.2,二、选择两区模型,The material contained herein is proprietary an

2、d confidential.2013 Concepts ETI,Inc.All rights reserved.3,三、选择设计模式,The material contained herein is proprietary and confidential.2013 Concepts ETI,Inc.All rights reserved.4,四、选择单位制,The material contained herein is proprietary and confidential.2013 Concepts ETI,Inc.All rights reserved.5,五、设置进口条件,The

3、 material contained herein is proprietary and confidential.2013 Concepts ETI,Inc.All rights reserved.6,六、输入扬程,The material contained herein is proprietary and confidential.2013 Concepts ETI,Inc.All rights reserved.7,七、选择三维叶轮,The material contained herein is proprietary and confidential.2013 Concepts

4、 ETI,Inc.All rights reserved.8,八、设置空化系数,The material contained herein is proprietary and confidential.2013 Concepts ETI,Inc.All rights reserved.9,九、选择进口轮毂比,The material contained herein is proprietary and confidential.2013 Concepts ETI,Inc.All rights reserved.10,十、输入进口轮毂比,The material contained here

5、in is proprietary and confidential.2013 Concepts ETI,Inc.All rights reserved.11,十一、输入进出口边倾角,The material contained herein is proprietary and confidential.2013 Concepts ETI,Inc.All rights reserved.12,十二、输入进口冲角,The material contained herein is proprietary and confidential.2013 Concepts ETI,Inc.All rig

6、hts reserved.13,十三、输入进口叶片数,The material contained herein is proprietary and confidential.2013 Concepts ETI,Inc.All rights reserved.14,十四、选择进口型式,The material contained herein is proprietary and confidential.2013 Concepts ETI,Inc.All rights reserved.15,十五、开式叶轮,The material contained herein is propriet

7、ary and confidential.2013 Concepts ETI,Inc.All rights reserved.16,十六、设置叶尖间隙,The material contained herein is proprietary and confidential.2013 Concepts ETI,Inc.All rights reserved.17,十七、不选择背叶片和平衡孔,The material contained herein is proprietary and confidential.2013 Concepts ETI,Inc.All rights reserved

8、.18,十八、设置出口参数,The material contained herein is proprietary and confidential.2013 Concepts ETI,Inc.All rights reserved.19,十九、选择损失模型,The material contained herein is proprietary and confidential.2013 Concepts ETI,Inc.All rights reserved.20,二十、不带扩压器,The material contained herein is proprietary and conf

9、idential.2013 Concepts ETI,Inc.All rights reserved.21,二十一、选择积液室,The material contained herein is proprietary and confidential.2013 Concepts ETI,Inc.All rights reserved.22,二十二、结束向导,The material contained herein is proprietary and confidential.2013 Concepts ETI,Inc.All rights reserved.23,二十三、隐藏积液室,The

10、 material contained herein is proprietary and confidential.2013 Concepts ETI,Inc.All rights reserved.24,二十四、Agile到三维模式,The material contained herein is proprietary and confidential.2013 Concepts ETI,Inc.All rights reserved.25,End,The material contained herein is proprietary and confidential.2013 Concepts ETI,Inc.All rights reserved.26,