coreldraw11快捷键.docx

coreldraw11快捷键.docx

《coreldraw11快捷键.docx》由会员分享，可在线阅读，更多相关《coreldraw11快捷键.docx（15页珍藏版）》请在冰豆网上搜索。

coreldraw11快捷键

coreldraw11快捷键

HTML字体大小列表","文本编辑","Ctrl+Shift+H","显示所有可用/活动的HTML字体大小的列表",

"VisualBasic编辑器（&V）...","主要的","Alt+F11","运行VisualBasicforApplications编辑器",

"按窗口大小显示（&F）","主要的","F4","放大绘图中的所有对象",

"按选定对象显示（&S）","主要的","Shift+F2","只放大选定的对象",

"按页面显示（&P）","主要的","Shift+F4","显示全部可打印页面",

"保存（&S）...","主要的","Ctrl+S","保存活动绘图",

"比例（&S）","主要的","Alt+F9","打开比例泊坞窗",

"编辑文本（&D）...","主要的","Ctrl+Shift+T","打开编辑文本对话框",

"不","文本编辑","Ctrl+N","将文本对齐方式更改为不对齐",

"擦除","主要的","X","擦除图形的一部分或将一个对象分为两个封闭路径",

"插入字符（&H）","主要的","Ctrl+F11","打开插入字符泊坞窗",

"查找文本（&F）...","文本编辑","Alt+F3","在绘画中查找指定的文本",

"撤消再制（&U）","主要的","Ctrl+Z","回退上一次操作",

"撤消再制（&U）","主要的","Alt+Backspace","回退上一次操作",

"垂直分散排列间距","主要的","Shift+A","在选定的对象间垂直分散排列间距",

"垂直分散排列中心","主要的","Shift+C","垂直分散排列选定对象的中心",

"垂直居中对齐","主要的","C","垂直对齐选定对象的中部",

"垂直排列文本","主要的","Ctrl+.","将文本更改为垂直排布（切换式）",

"粗体","文本编辑","Ctrl+B","更改文本样式为粗体",

"打开（&O）...","主要的","Ctrl+O","打开一个已有绘图",

"打印（&P）...","主要的","Ctrl+P","打印活动绘图",

"大小（&I）","主要的","Alt+F10","打开大小泊坞窗",

"导出（&E）...","主要的","Ctrl+E","导出文本或对象到另一种格式",

"导航器","主要的","N","打开导航器窗口，使您可以导航到文档中的任何对象",

"导入（&I）...","主要的","Ctrl+I","导入文本或对象",

"到后部（&B）","主要的","Shift+PgDn","将选定对象放置到后部",

"到前部（&F）","主要的","Shift+PgUp","将选定对象放置到前部",

"底部分散排列

","主要的","Shift+B","底部分散排列选定的对象",

"底端对齐","主要的","B","对齐选定对象的底端",

"顶部分散排列","主要的","Shift+T","顶部分散排列选定的对象",

"顶端对齐","主要的","T","对齐选定对象的顶端",

"对齐基准（&L）","主要的","Alt+F12","将文本与基准对齐",

"对齐网格（&P）","主要的","Ctrl+Y","将对象与网格对齐（切换）",

"多边形（&P）","主要的","Y","绘制对称多边形；双击该工具打开“选项”对话框的“工具框”标签",

"封套（&E）","主要的","Ctrl+F7","打开封套泊坞窗",

"复制（&C）","主要的","Ctrl+C","复制选定对象并将它放置在“剪贴板”中",

"复制（&C）","主要的","Ctrl+Insert","复制选定对象并将它放置在“剪贴板”中",

"更改大小写（&H）...","文本编辑","Shift+F3","更改所选文本的大小写",

"画笔","主要的","F12","打开“轮廓画笔”对话框",

"剪切（&T）","主要的","Ctrl+X","剪切选定对象并将它放置在“剪贴板”中",

"剪切（&T）","主要的","Shift+Delete","剪切选定对象并将它放置在“剪贴板”中",

"减小字体大小","文本编辑","Ctrl+NUMPAD2","将字体大小减小为上一个字体大小设置",

"减小字体大小","主要的","Ctrl+NUMPAD2","将字体大小减小为上一个字体大小设置",

"渐变","主要的","F11","给对象应用喷泉式填充",

"将轮廓转换为对象（&E）","主要的","Ctrl+Shift+Q","将轮廓转换为对象",

"交互式填充","主要的","G","将填充添加到对象；单击并拖动对象实现喷泉式填充",

"结合（&C）","主要的","Ctrl+L","结合选定对象",

"居中","文本编辑","Ctrl+E","将文本对齐方式更改为居中对齐",

"矩形（&R）","主要的","F6","绘制矩形；双击该工具创建页面图文框",

"两端","文本编辑","Ctrl+J","将文本对齐方式更改为两端对齐",

"亮度/对比度/强度（&I）...","主要的","Ctrl+B","",

"另存为（&A）...","主要的","Ctrl+Shift+S","用新名保存活动绘图",

"轮廓图（&C）","主要的","Ctrl+F9","打开轮廓图泊坞窗",

"螺旋形（&S）","主要的","A","绘制螺旋形；双击该工具打开“选项”对话框的“工具框”标签",

"拼写检查（&S）...","主要的","Ctrl+F12","启动“拼写检查器”；检查选定文本的拼写",

"前一页","主要的","PgUp","转到前一页",

"强制全部","文本编辑","Ctrl+H","将文本对齐方式更改为强制上一行全部对齐",

"切换挑选状态","主要的","Ctrl+Space","在当前工具和挑选工具之间切换",

"取消组合（&U）","主要的","Ctrl+U","取消选定对象或对象组的组合",

"全部小型大写","文本编辑","Ctrl+Shift+K","将所有文本字符更改为小型大写字符",

"全屏预览（&F）","主要的","F9","显示绘图的全屏预览",

"群组（&G）","主要的","Ctrl+G","群组选定的对象",

"色度/饱和度/光度（&S）...","主要的","Ctrl+Shift+U","",

"删除（&L）","主要的","Delete","删除选定对象",

"删除右边一个字","文本编辑","Ctrl+Delete","删除文本插入记号右边的字",

"删除右边一个字符","文本编辑","Delete","删除文本插入记号右边的字符",

"上一个常用的字体大小","文本编辑","Ctrl+NUMPAD4","将字体大小减小为字体大小列表中上一个可用设置",

"上一个常用的字体大小","主要的","Ctrl+NUMPAD4","将字体大小减小为字体大小列表中上一个可用设置",

"上移镜头","主要的","Alt+UpArrow","将镜头相对于绘画上移",

"上移一段","文本编辑","Ctrl+UpArrow","将文本插入记号向上移动一个段落",

"上移一个文本框","文本编辑","PgUp","将文本插入记号向上移动一个文本框",

"上移一行","文本编辑","UpArrow","将文本插入记号向上移动一行",

"生成属性栏","主要的","Ctrl+Return","生成“属性栏”并对准可被标记的第一个可视项",

"视图管理器（&W）","主要的","Ctrl+F2","打开“视图管理器泊坞窗”",

"视图切换","主要的","Shift+F9","在最近使用的两种视图质量间进行切换",

"手绘（&F）","主要的","F5","用“手绘”模式绘制线条和曲线",

"手形","主要的","H","使用该工具通过单击并拖动来平移绘图",

"首字下沉","文本编辑","Ctrl+Shift+D","添加/移除文本对象的首字下沉格式（切换）",

"属性","主要的","Alt+Return","依当前选项或工具显示对象或工具的属性",

"刷新窗口（&W）","主要的","Ctrl+W","重绘绘图窗口",

"水平分散排列间距","主要的","Shift+P","在选定的对象间水平分散排列间距",

"水平分散排列中心","主要的","Shift+E","水平分散排列选定对象的中心",

"水平居中对齐","主要的","E","水平对齐选定对象的中部",

"水平排列文本","主要的","Ctrl+,","将文本排列改为水平方向",

"缩放","主要的","Z","放大和缩小绘图；在选定区域上单击并拖动放大，右击缩小",

"缩放一次","主要的","F2","执行一次缩放操作，然后返回到上一工具",

"缩小（&O）","主要的","F3","缩小绘图",

"透镜（&L）","主要的","Alt+F3","打开透镜泊坞窗",

"图形和文本样式（&Y）","主要的","Ctrl+F5","打开“图形和文本样式泊坞窗”",

"图纸（&G）","主要的","D","绘制矩形组；双击该工具打开“选项”对话框的“工具框”标签",

"退出（&X）","主要的","Alt+F4","退出CorelDRAW并提示保存活动绘图",

"椭圆（&E）","主要的","F7","绘制椭圆形和圆形；双击该工具打开“选项”对话框的“工具框”标签",

"网状填充","主要的","M","将对象转换为网状填充对象",

"位置（&P）","主要的","Alt+F7","打开位置泊坞窗",

"文本","文本编辑","Ctrl+F10","选定“文本”标签，打开“选项”对话框",

"文本（&T）","主要的","F8","添加文本；单击页面添加“美术字文本”；单击并拖动添加“段落文本”",

"文本格式（&F）...","主要的","Ctrl+T","文本格式的属性",

"下画线","文本编辑","Ctrl+U","更改文本样式为带下划线样式",

"下一个常用的字体大小","文本编辑","Ctrl+NUMPAD6","将字体大小增加为字体大小列表中的下一个设置",

"下一个常用的字体大小","主要的","Ctrl+NUMPAD6","将字体大小增加为字体大小列表中的下一个设置",

"下一页","主要的","PgDn","转到下一页",

"下移镜头","主要的","Alt+DnArrow","将镜头相对于绘画下移",

"下移一段","文本编辑","Ctrl+DnArrow","将文本插入记号向下移动一个段落",

"下移一个文本框","文本编辑","PgDn","将文本插入记号向下移动一个文本框",

"下移一行","文本编辑","DnArrow","将文本插入记号向下移动一行",

"显示非打印字符（&N）","文本编辑","Ctrl+Shift+C","显示非打印字符",

"线性","主要的","Alt+F2","包含为线性尺度线条指定属性的功能",

"项目符号","主要的","Ctrl+M","添加/移除文本对象的项目符号（切换）",

"向后一位（&N）","主要的","Ctrl+PgDn","将选定对象按照对象的堆栈顺序放置到向后一个位置",

"向前一位（&O）","主要的","Ctrl+PgUp","将选定对象按照对象的堆栈顺序放置到向前一个位置",

"向上超微调","主要的","Shift+UpArrow","使用“超微调”因子向上微调对象",

"向上微调","主要的","Ctrl+UpArrow","使用微调因子向上微调对象",

"向上微调（&U）","主要的","UpArrow","向上微调对象",

"向上选择一段","文本编辑","Ctrl+Shift+UpArrow","向上选择一段文本",

"向上选择一个文本框","文本编辑","Shift+PgUp","向上选择一个文本框",

"向上选择一行","文本编辑","Shift+UpArrow","向上选择一行文本",

"向下超微调","主要的","Shift+DnArrow","使用“超微调”因子向下微调对象",

"向下微调

","主要的","Ctrl+DnArrow","使用微调因子向下微调对象",

"向下微调（&D）","主要的","DnArrow","向下微调对象",

"向下选择一段","文本编辑","Ctrl+Shift+DnArrow","向下选择一段文本",

"向下选择一个文本框","文本编辑","Shift+PgDn","向下选择一个文本框",

"向下选择一行","文本编辑","Shift+DnArrow","向下选择一行文本",

"向右超微调","主要的","Shift+RightArrow","使用超微调因子向右微调对象",

"向右微调","主要的","RightArrow","向右微调对象",

"向右微调","主要的","Ctrl+RightArrow","使用微调因子向右微调对象",

"向左超微调","主要的","Shift+LeftArrow","使用超微调因子向左微调对象",

"向左微调","主要的","LeftArrow","向左微调对象",

"向左微调","主要的","Ctrl+LeftArrow","使用微调因子向左微调对象",

"斜体","文本编辑","Ctrl+I","更改文本样式为斜体",

"新建（&N）","主要的","Ctrl+N","创建新绘图",

"形状","主要的","F10","编辑对象的节点；双击工具可选择选定对象上的所有节点",

"旋转（&R）","主要的","Alt+F8","打开旋转泊坞窗",

"选项（&O）...","主要的","Ctrl+J","打开设置CorelDRAW选项的对话框",

"选择全部对象","主要的","Ctrl+A","",

"选择文本结尾","文本编辑","Ctrl+Shift+PgDn","选择文本结尾的文本",

"选择文本开始","文本编辑","Ctrl+Shift+PgUp","选择文本开始的文本",

"选择文本框的开始","文本编辑","Ctrl+Shift+Home","选择文本框开始的文本",

"选择文本框结尾","文本编辑","Ctrl+Shift+End","选择文本框结尾的文本",

"选择行首","文本编辑","Shift+Home","选择行首的文本",

"选择行尾","文本编辑","Shift+End","选择行尾的文本",

"选择右边一个字","文本编辑","Ctrl+Shift+RightArrow","选择文本插入记号右边的字",

"选择右边一个字符","文本编辑","Shift+RightArrow","选择文本插入记号右边的字符",

"选择左边一个字","文本编辑","Ctrl+Shift+LeftArrow","选择文本插入记号左边的字",

"选择左边一个字符","文本编辑","Shift+LeftArrow","选择文本插入记号左边的字符",

"颜色","主要的","Shift+F12","打开“轮廓颜色”对话框",

"颜色","主要的","Shift+F11","给对象应用均匀填充",

"颜色平衡（&C）...","主要的","Ctrl+Shift+B","",

"样式列表","文本编辑","Ctrl+Shift+S","显示所有绘画样式的列表",

"移到文本开头","文本编辑","Ctrl+PgUp","将文本插入记号移动到文本开头",

"移到文本框结尾","文本编辑","Ctrl+End","将文本插入记号移动到文本框结尾",

"移到文本框开头","文本编辑","Ctrl+Home","将文本插入记号移动到文本框开头",

"移到行首","文本编辑","Home","将文本插入记号移动到行首",

"移到行尾","文本编辑","End","将文本插入记号移动到行尾",

"移动到文本结尾","文本编辑","Ctrl+PgDn","移动文本插入记号到文本结尾",

"艺术笔","主要的","I","绘制曲线并将预设、笔刷、喷涂、书法或压感效果应用于笔触",

"右","文本编辑","Ctrl+R","将文本对齐方式更改为右对齐",

"右对齐","主要的","R","右对齐选定的对象",

"右分散排列","主要的","Shift+R","向右分散排列选定的对象",

"右移镜头","主要的","Alt+RightArrow","将镜头相对于绘画右移",

"右移一个字","文本编辑","Ctrl+RightArrow","将文本插入记号向右移动一个字",

"右移一个字符","文本编辑","RightArrow","将文本插入记号向右移动一个字符",

"再制（&D）","主要的","Ctrl+D","再制选定对象并以指定的距离偏移",

"在页面居中","主要的","P","使选定对象在页面居中对齐",

"增加字体大小","文本编辑","Ctrl+NUMPAD8","将字体大小增加为下一个字体大小设置",

"增加字体大小","主要的","Ctrl+NUMPAD8","将字体大小增加为下一个字体大小设置",

"粘贴（&P）","主要的","Ctrl+V","将“剪贴板”的内容粘贴到绘图中",

"粘贴（&P）","主要的","Shift+Insert","将“剪贴板”的内容粘贴到绘图中",

"折分（&B）","主要的","Ctrl+K","拆分选定对象",

"这是什么？

（&W）","主要的","Shift+F1","调用“这是什么？

”帮助",

"重复%s（&R）","主要的","Ctrl+R","重复上一次操作",

"重做%s（&E）","主要的","Ctrl+Shift+Z","回退上一次“撤消”操作",

"转换（&V）","主要的","Ctrl+F8","转换美术字为段落文本或反过来转换",

"转换为曲线（&V）","主要的","Ctrl+Q","将选定对象转换为曲线，以便进行更灵活的编辑",

"字体粗细列表","文本编辑","Ctrl+Shift+W","显示所有可用/活动字体粗细的列表",

"字体大小列表","文本编辑","Ctrl+Shift+P","显示一包含所有可用/活动字体尺寸的列表",

"字体列表","文本编辑","Ctrl+Shift+F","显示一包含所有可用/活动字体的列表",

"左","文本编辑","Ctrl+L","将文本对齐方式更改为左对齐",

"左对齐","主要的","L","左对齐选定的对象",

"左分散排列","主要的","Shift+L","向左分散排列选定的对象",

"左移镜头","主要的","Alt+LeftArrow","将镜头相对于绘画左移",

"左移一个字","文本编辑","Ctrl+LeftArrow","将文本插入记号向左移动一个字",

"左移一个字符","文本编辑","LeftArrow","将文本插入记号向左移动一个字符",

回答者：

luminol-魔法学徒一级8-2418:

02

HTML字体大小列表","文本编辑","Ctrl+Shift+H","显示所有可用/活动的HTML字体大小的列表",

"VisualBasic编辑器（&V）...","主要的","Alt+F11","运行VisualBasicforApplications编辑器",

"按窗口大小显示（&F）","主要的","F4","放大绘图中的所有对象",

"按选定对象显示（&S）","主要的","Shift+F2","只放大选定的对象",

"按页面显示（&P）","主要的","Shift+F4","显示全部可打印页面",

"保存（&S）...","主要的","Ctrl+S","保存活动绘图",

"比例（&S）","主要的","Alt+F9","打开比例泊坞窗",

"编辑文本（&D）...","主要的","Ctrl+Shift+T","打开编辑文本对话框",

"不","文本编辑","Ctrl+N","将文本对齐方式更改为不对齐",

"擦除","主要的","X","擦除图形的一部分或将一个对象分为两个封闭路径",

"插入字符（&H）","主要的","Ctrl+F11","打开插入字符泊坞窗",

"查找文本（&F）...","文本编辑","Alt+F3","在绘画中查找指定的文本",

"撤消再制（&U）","主要的","Ctrl+Z","回退上一次操作",

"撤消再制（&U）","主要的","Alt+Backspace","回退上一次操作",

"垂直分散排列间距","主要的","Shift+A","在选定的对象间垂直分散排列间距",

"垂直分散排列中心","主要的","Shift+C","垂直分散排列选定对象的中心",

"垂直居中对齐","主要的","C","垂直对齐选定对象的中部",

"垂直排列文本","主要的","Ctrl+.","将文本更改为垂直排布（切换式）",

"粗体","文本编辑","Ctrl+B","更改文本样式为粗体",

"打开（&O）...","主要的","Ctrl+O","打开一个已有绘图",

"打印（&P）...","主要的","Ctrl+P","打印活动绘图",

"大小（&I）","主要的","Alt+F10","打开大小泊坞窗",

"导出（&E）...","主要的","Ctrl+E","导出文本或对象到另一种格式",

"导航器","主要的","N","打开导航器窗口，使您可以导航到文档中的任何对象",

"导入（&I）...","主要的","Ctrl+I","导入文本或对象",

"到后部（&B）","主要的","Shift+PgDn","将选定对象放置到后部",

"到前部（&F）","主要的","Shift+PgUp","将选定对象放置到前部",

"底部分散排列

","主要的","Shift+B","底部分散排列选定的对象",

"底端对齐","主要的","B","对齐选定对象的底端",

"顶部分散排列","主要的","Shift+T","顶部分散排列选定的对象",

"顶端对齐","主要的","T","对齐选定对象的顶端",

"对齐基准（&L）","主要的","Alt+F12","将文本与基准对齐",

"对齐网格（&P）","主要的","Ctrl+Y","将对象与网格对齐（切换）",

"多边形（&P）","主要的","Y","绘制对称多边形；双击该工具打开“选项”对话框的“工具框”标签",

"封套（&E）","主要的","Ctrl+F7","打开封套泊坞窗",

"复制（&C）","主要的","Ctrl+C","复制选定对象并将它放置在“剪贴板”中",

"复制（&C）","主要的","Ctrl+Insert","复制选